Where is the fuel filter located on a VE Commodore?
Where is the fuel filter located on a VE Commodore?
Filter is internal to the pump (in the tank).
How do you change the fuel filter in a Commodore?
Rightio, in to it. According to the book you need to release the pressure in the fuel lines before dicking with them. Something to do with fuel injection. First thing you do is remove the fuel cap; this takes the pressure from the tank. This is important for when you take off the fuel filter from the hoses. Trust me.
How to replace the fuel filter on a Holden VZ?
(or how to get a Holden Quick Type Fuel Connector to unlock & relock, and replace a Fuel Filter without destroying: the connectors, your car, your sanity, or burning a hole in your wallet or setting fire to your car!) This procedure relates to replacing a fuel filter (External Canister type) as fitted to the VZ (V6 & V8) series sedans.
When to replace fuel filter on Holden Monaro CV8?
This is a step by step guide to replacing your fuel filter. This was done on a 2002 Holden Monaro cv8, is the same process for vx-vz series Commodores, HSV’s and 04-06 Pontiac GTO’s Any questions or comments on what you would like to see next, leave a message below! Loading…
How do you change the fuel filter in a car?
Break the air seal by removing the plastic clip from the car body and rotating the filter a few times. After removing the inlet side hose, let the fuel run out of the filter into a tray before undoing the other end. On the outlet end, you squeeze the connector with one hand and pull on the filter with the other using a twisting motion.
How do you change the fuel line on a VT Commodore?
The fuel filters connect into a clip on the end of the fuel lines. If you just pull on the filter to remove, you will break the clip. Results up to a $100.00 worth of new fuel line! Great Toolbox Addition! I bought this to use on our VT Commodore for a fuel filter change.
How to remove fuel filter on Holden Commodore?
The fuel filters connect into a clip on the end of the fuel lines. If you just pull on the filter to remove, you will break the clip. Results up to a $100.00 worth of new fuel line! Great Toolbox Addition! I bought this to use on our VT Commodore for a fuel filter change. It took me a minute or two to get it positioned properly the very first time.
How do you change a VT fuel filter?
There is an art to removing those clips,it can be done by applying slight pressure to the ends whilst depressing the locking clip.Be sure to disconnect battery and fuel fuse before attemting,also be careful with fuel leakage.A small screw driver may assist in removing hoses/clips.
How to change fuel pump in VT V6 sedan?
Give your fuel tank a smack with a rubber mallet and see if it will start . This trick worked with mine for a while but it started to get noisy the crapped itself. The hardest part i found was draining the tank and disconecting the fuel lines with the special tool. I wouldn’t just go replacing the fuel pump because someone said it “might” be gone.
