Where to find the engine number on a Cadillac?
Where to find the engine number on a Cadillac?
For a printable PDF engine ID guide, please visit the tech section of our web site. The first step is to ID the engine block. The block casting number is found at the rear of the Cadillac engine, between the intake manifold and transmission bell housing, right next to the oil pressure sending unit.
What are the engine numbers on a Cadillac 472?
Note that the ’68-’69 (and a few rare ’70 472s) use a block that looks identical at first glance, but bears different casting numbers (ending in 6238), has smaller oil passages and does not have clearance for a 500 crank (rod bolt notches in bottom of cylinder bores). Fine for a mild street engine, but unacceptable for a serious performance engine.
What kind of engine did Cadillac have in 1964?
Hydromatic bellhousing pattern Block#1473267, right head #3632151, left head #3632150 The 1964 Jetaway 429 is reportedly interchangeable with the 1963 390. In 1964 there were two different 429 longblocks. The 62, 75 and 86 series cars used a crankshaft with a 3 3/16″ hub to fit the Jetaway Hydra-Matic transmission.
What kind of engine does a Cadillac 902 have?
From ’68-’73, the heads were of the 76cc small chamber design. These heads have one of 3 casting numbers. All ’68/’69 and ’71-’73 cars were equipped with a smog pump from the factory, while the ’70 cars were not. The ‘250 and ‘902 heads are equipped with built in smog rails, while the ‘950 heads were not.
Which is cylinder number one in a Cadillac?
Cylinder #1 is always right bank (the engines right), forward most position, regardless of engine orientation. Looking at the engine from the front of the car, V6.: A longitudinally mounted engine- 5v6 3v4 1v2 V Front Transverse, crank to your left – 1 3 5 2 4 6 Crank to your right – 6 4 2 5 3 1
Note that the ’68-’69 (and a few rare ’70 472s) use a block that looks identical at first glance, but bears different casting numbers (ending in 6238), has smaller oil passages and does not have clearance for a 500 crank (rod bolt notches in bottom of cylinder bores). Fine for a mild street engine, but unacceptable for a serious performance engine.
Where is the casting number on a Cadillac engine?
The first step is to ID the engine block. The block casting number is found at the rear of the Cadillac engine, between the intake manifold and transmission bell housing, right next to the oil pressure sending unit. The casting number is the raised, cast in number on the passenger side.
How to identify a Ford 390 block engine?
How to Identify a Ford 390 Block. The 390 is a common FE engine, first introduced in 1961 and produced through 1971 for autos and 1976 for trucks. Begin by identifying the block as an FE and then compare the casting number to a listing of known 390 numbers. If this doesn’t work, measuring the bore and stroke is necessary.
