What happens if you leave your expedition door ajar?
What happens if you leave your expedition door ajar?
Dome light on – If your Expedition thinks that the door is ajar, it’ll leave the dome light on. This can create some visibility issues at night. Most vehicles have some sort of switch that can deactivate the dome light.
Where is the ajar switch on a Ford Explorer?
Four are located in the driver’s door, passenger’s doors, right, and left rear door. The sensor works hand-in-hand with the ajar switch. The switch has a sort of plunger with a spring inside. The plunger compresses the spring when the door is closed and releases it when opened.
When to replace the door jamb switch on a Ford Expedition?
Ford door jamb switch replacement…. Discussion in ‘ 2nd Gen – 2003 – 2006 ‘ started by Hamfisted, Nov 20, 2013 . It’s a very common problem with Fords, the driver’s door jamb switch. Ford in their infinite wisdom chose to put this pin switch in the door locking mechanism.
How to disable the door ajar light on a Ford Explorer?
Why Is The Door Ajar Light Still On Even After All Doors Are Firmly Closed? 1 Spray a WD-40 lubricant liberally into the door latch. 2 Open and close the door firmly a couple of times to help work the grease in the mechanism. 3 Replace defective door switches 4 Fix structural causes, if any.
Why does my Ford Expedition keep the door ajar warning on?
Your Ford Expedition ‘s door ajar message can help you get a door all the way closed when you otherwise wouldn’t notice when it was open. Over the life of the vehicle, it is possible for the door ajar warning to stay on even when the doors are, in fact, not ajar.
Four are located in the driver’s door, passenger’s doors, right, and left rear door. The sensor works hand-in-hand with the ajar switch. The switch has a sort of plunger with a spring inside. The plunger compresses the spring when the door is closed and releases it when opened.
How to disable the door ajar on Ford Explorer?
Here is a step by step approach to disabling the door ajar in your ford explorer. The first step is to locate the door with the door ajar malfunction. But how do you discover the door? Get into your car and turn the ignition on without starting the vehicle. Open the doors one by one to locate the faulty door.
Ford door jamb switch replacement…. Discussion in ‘ 2nd Gen – 2003 – 2006 ‘ started by Hamfisted, Nov 20, 2013 . It’s a very common problem with Fords, the driver’s door jamb switch. Ford in their infinite wisdom chose to put this pin switch in the door locking mechanism.
Why does my door ajar light keep coming on?
Usually, the door ajar light is going to be caused by a bad door jamb switch. Most of the time, they are pretty easy to find. Typically, it’ll look something like the switch pictured below. It’s usually one or two bolts to replace, and they’re cheap.
Why does the door ajar warning keep coming on?
Over the life of the vehicle, it is possible for the door ajar warning to stay on even when the doors are, in fact, not ajar. The door ajar warning staying on is usually caused by a bad door jamb switch. Here are the most common symptoms when the door jamb switch has failed, or the door ajar warning stays on.
Dome light on – If your Expedition thinks that the door is ajar, it’ll leave the dome light on. This can create some visibility issues at night. Most vehicles have some sort of switch that can deactivate the dome light.
How can I fix the door ajar light on my Ford?
Fix door ajar light on Ford First, try lubricating the door ajar switch. Shoot a light lubricating oil into the latch and open and close the door several times to work the lube into the pin switch. If that doesn’t work, disconnect the electrical connector at the door latch and test for BCM power and ground.
What causes a door ajar light to come on?
If you have a door ajar light on issue, the problem can be the door ajar switch, the body control module, or a broken wire in the door hinge area. Here’s how the system works. of the door latch.
Over the life of the vehicle, it is possible for the door ajar warning to stay on even when the doors are, in fact, not ajar. The door ajar warning staying on is usually caused by a bad door jamb switch. Here are the most common symptoms when the door jamb switch has failed, or the door ajar warning stays on.
What’s the problem with the Ford Expedition door ajar light?
Once I replaced that in a couple of minutes (for an outrageous $5 plus tax!), the problem stopped. Third, the design of the door ajar sensor on the 2003 Expedition is criminal. It’s a metal plunger in a switch whose circuit is open when the door is properly closed, and closed if not – sending the warning signal.
What makes the door ajar and dome lights stay on?
The door ajar and dome lights stay on when the car is started and dome lights will go off after driving for awhile. The door ajar “alarm” continues to go off while driving and sometimes causing the interior lights to come on. There seems to be no way to get it to stop going off.
When does the dome light go off on a Ford Expedition?
Good news is that the dome lights go off about 15 seconds after being put into drive, or after 20 mins after getting out. I noticed other posters said this problem drained their battery, but this failsafe should avoid that situation unless that is not working or the battery is very weak.
Once I replaced that in a couple of minutes (for an outrageous $5 plus tax!), the problem stopped. Third, the design of the door ajar sensor on the 2003 Expedition is criminal. It’s a metal plunger in a switch whose circuit is open when the door is properly closed, and closed if not – sending the warning signal.
Good news is that the dome lights go off about 15 seconds after being put into drive, or after 20 mins after getting out. I noticed other posters said this problem drained their battery, but this failsafe should avoid that situation unless that is not working or the battery is very weak.
The door ajar and dome lights stay on when the car is started and dome lights will go off after driving for awhile. The door ajar “alarm” continues to go off while driving and sometimes causing the interior lights to come on. There seems to be no way to get it to stop going off.
Usually, the door ajar light is going to be caused by a bad door jamb switch. Most of the time, they are pretty easy to find. Typically, it’ll look something like the switch pictured below. It’s usually one or two bolts to replace, and they’re cheap.
Where is the ajar light on a Ford Explorer?
Your car ajar light is often located on the dashboard of your vehicle. It often displays “door ajar” or is sometimes represented as a lighted car image indicating which of your car doors is open. These lights become a cause of concern when it remains lighted even after all the doors are firmly closed.
Why does my Ford Explorer not lock the door?
The car will not be safe for parking, especially in public places, as the key fob cannot lock the doors. Door ajar malfunction is a common problem for Ford explorer users. Some of the issues: The door ajar sensor in the door hatch may get stock and malfunction. The door sensor may be faulty.
Your car ajar light is often located on the dashboard of your vehicle. It often displays “door ajar” or is sometimes represented as a lighted car image indicating which of your car doors is open. These lights become a cause of concern when it remains lighted even after all the doors are firmly closed.
The car will not be safe for parking, especially in public places, as the key fob cannot lock the doors. Door ajar malfunction is a common problem for Ford explorer users. Some of the issues: The door ajar sensor in the door hatch may get stock and malfunction. The door sensor may be faulty.
What to do if your Ford Explorer door is ajar?
There may be problems with the wires connecting the sensor to the car computer. Spray a WD-40 spray liberally on the door hatch. Open and close the door a couple of times to free the mechanism. If you discover a faulty sensor, you can contact your dealer for a replacement. Check for broken wire among the door wire and fix it.
How to test for which door ajar switch is not working?
If the dome light doesn’t come on when the door is open, that’s the bad switch. Edit: If it is saying the door is open when it shouldn’t, but intermittently and rarely, close all the doors. The dome light should be off. If it is, push on each door one by one and see if the dome light ever flickers on. MG_McAnick July 6, 2016, 6:20am #8
What causes the door ajar warning light to stay on?
However, a fault in either the electrical or mechanical components can cause the door ajar warning light to remain on when the doors are closed, and possibly cause the interior lights to remain on. Can I drive with the door ajar warning light on?
What does the ajar light mean on a car?
The door ajar light, contrary to its’ name, does not only mean a passenger door is open. In most vehicles, the warning sounds when the hood is not latched properly, or the trunk or liftgate are not closed properly.
How to replace the door jamb on a Ford Expedition?
Remove the three Torx screws that retain the lock mechanism With the lock mechanism freed from the door, remove the exterior door handle by removing the two 11mm nuts on either end (accessed from the inside of door…) and remove the two connecting rods from the handle, set it aside out of the way….
Fix door ajar light on Ford First, try lubricating the door ajar switch. Shoot a light lubricating oil into the latch and open and close the door several times to work the lube into the pin switch. If that doesn’t work, disconnect the electrical connector at the door latch and test for BCM power and ground.
Where is the pin switch on a Ford Expedition?
Ford in their infinite wisdom chose to put this pin switch in the door locking mechanism. The same mechanism that gets slammed maybe 30+ times a day (maybe more in a work truck…). Anyway I thought I’d post some pics on the removal and replacement of this little pin switch since I haven’t found a whole lot out there on the web.
Why does my Ford Edge have an ajar warning light?
A persistent “door ajar” warning light is frustrating owners whose doors are most certainly not ajar. The problem is most prevelant in the 2011-2013 Ford Edge Ford will try to clean the sensor but owners say that’s only a temporary fix.
Why does the door ajar light keep coming on?
Ford will try to clean the sensor but owners say that’s only a temporary fix. While it starts intermittently, the “door ajar” light is coming on – and staying on – for Ford owners, even when their doors are certainly closed.
How long does it take to fix Ford door ajar light?
On May 5th, 2014, Ford released a Technical Service Bulletin (TSB) related to the “door ajar” light (NHTSA reference ID 10054930). It outlines the steps a service mechanic should go through and how long it should take (under 2 hours on average). The TSB also lists these vehicles (built on or before 07/15/2013) as having this problem:
A persistent “door ajar” warning light is frustrating owners whose doors are most certainly not ajar. The problem is most prevelant in the 2011-2013 Ford Edge Ford will try to clean the sensor but owners say that’s only a temporary fix.
How does the door ajar light work on a Ford?
The body control module sends power to the door ajar switch on the green/violet wire. When the door is closed and the door ajar switch is operating properly, the switch is closed and the BCM power is connected to ground. The BCM sees the voltage drop and turns off the door ajar light.
On May 5th, 2014, Ford released a Technical Service Bulletin (TSB) related to the “door ajar” light (NHTSA reference ID 10054930). It outlines the steps a service mechanic should go through and how long it should take (under 2 hours on average). The TSB also lists these vehicles (built on or before 07/15/2013) as having this problem:
If you have a door ajar light on issue, the problem can be the door ajar switch, the body control module, or a broken wire in the door hinge area. Here’s how the system works. of the door latch.
Is it safe to drive with the door ajar warning on?
It is safe to drive with the door ajar warning on, as long as you’ve made sure that all of the doors are securely shut. Your Expedition thinking that the door is ajar can keep the power locks from working. If that is the case, make sure that you manually lock the doors when you feel the need.
