What is the fault code for a Volvo D16b?
What is the fault code for a Volvo D16b?
For engine D16B: The fuel pressure is above normal (more than 700 kPa). The fuel filter is clogged, the bypass valve does not open. FMI 3 The voltage on the EA27 contact of the engine block is above 4.95 V. Short circuit of the wire to the power supply or to the signal wire.
What is the fault code for a Volvo truck?
Reset ABS Faults, Body Controller Faults and more. 1 Volvo Link System Faults (MID 142) Fault Code Description FMI MID 142 PID 155 Input 1-4. 2 Vehicle ECU Faults (MID 144) 3 Climate Control Faults (MID 146) 4 Light Control Module Faults (MID 216) 5 Gear Selector Module Faults (MID 223)
What is the fault code for a mid 128 engine?
Engine ECU Faults (MID 128) Fault Code Description FMI Codes MID 128 PID 26 Engine Fan Speed Percent 3,8 MID 128 PID 27 EGR Valve #1 Position Sensor 3,4,5 MID 128 PID 45 Preheater Relay Status 3,4,5 MID 128 PID 81 Particulate Filter 0,2,3,5,12
For engine D16B: The fuel pressure is above normal (more than 700 kPa). The fuel filter is clogged, the bypass valve does not open. FMI 3 The voltage on the EA27 contact of the engine block is above 4.95 V. Short circuit of the wire to the power supply or to the signal wire.
What is the fault code for a Volvo?
FMI 3 The voltage on the contact block of the internal combustion engine EA2 is higher than 4.95 V. A short to the power or signal wire, or the sensor is faulty. FMI 4 The voltage on the contact block of the internal combustion engine EA2 is below 0.08 V. Break of the power supply wire or sensor signal.
What causes fault code er32-00 on Volvo Excavator?
Condition: If the locomotive control unit (V-ECU) records a voltage on JA56 below o.95V (open circuit), the fault code ER32-00 will be generated. Possible cause: The proportional valve drive circuit is open; the proportional valve circuit (frame ground wire) is open; the V-ECU’s JA pin is damaged.
How are Sid numbers determined on a Volvo Excavator?
Each parameter has a Volvo unique number. SID: Subsystem Identification D eion (represents component identification). The SID numbers are determined by which control component (MID) they are transmitted from. Each control component has its own sequence of SID numbers. The exceptions are the SID numbers 151-255, which are common to all systems.
