What does E 32 mean on a CAT forklift?

What does E 32 mean on a CAT forklift?

yes E32 is overheat stage1. if the radiator is dirty blow it out. make sure coolant is up in the reservoir and radiator.

How do I reset the code on my cat forklift?

1. Start the stopwatch and turn the forklift key switch on simultaneously.
2. Wait 3 seconds, then press the forklift accelerator five times in.
3. Wait 7 seconds, then press and hold the accelerator for 10 seconds or more until the malfunction indication light starts flashing.
4. Immediately release the accelerator pedal.

How do you clear the codes on a Nissan Forklift?

To erase your Nissan forklift codes, the repairs must first be made. Following the necessary repairs, return to Diagnostic Mode. Hold the accelerator down for a minimum of 10 seconds, then release the accelerator and the Nissan forklift codes should be erased.

What is the code on a Caterpillar Forklift?

Error Code Code Meaning E03 VCM communication error E04 ECM communication error E05 DCM communication error E06 HST communication error

Where can I get a cat forklift truck?

Cat ® lift trucks are supported by network of dealers across Europe, Africa and the Middle East. No matter your location, we should have a dealer nearby who will be willing to help with your forklift truck and warehouse equipment needs.

Who are Cat Lift Trucks and materials handling solutions?

Forklift Trucks & Materials Handling Solutions Cat® Lift Trucks are one of the leading manufacturers of forklift trucks and materials handling equipment with a network of dealers across Europe, Africa and the Middle East.

Which is better an electric forklift or an internal combustion forklift?

Unlike internal combustion forklifts, electric forklifts are quiet and generally non-polluting but present other serious hazards that must be addressed. Electric forklifts produce zero emissions, virtually eliminate the hazard of carbon monoxide poisoning, and run more quietly than internal combustion forklifts.

What is the error code on a Caterpillar Forklift?

Caterpillar Forklift Error Codes Error Code Code Meaning E03 VCM communication error E04 ECM communication error E05 DCM communication error E06 HST communication error

What are the error codes on a Raymond forklift?

RAYMOND Forklift Truck Error Codes list. C14 – Arm Angle Reference Warning. C19 – Default Parameter Warning. C20 – Thumb Control Warning. C23 – Master Control ON / OFF Switch Warning. E101 – Power Amplifier Doesn’t Correspond with the Type of Truck. E104 – Brake Output Error. E106 – Digital Output or Field Overcurrent.

How do you clear the hour meter on a forklift?

Press and hold the accelerator for 10 seconds or more. Doing so erases the results of the self-diagnostic test, successfully clearing the forklift codes. Only the current hour meter will be displayed on the dashboard; no codes should be present. . 7. Release the pedal and turn the key switch off. . 8.

How do you press the accelerator on a forklift?

1. Start the stopwatch and turn the forklift key switch on simultaneously. Do not press the accelerator. . 2. Wait 3 seconds, then press the forklift accelerator five times in succession, ending the set of five with the pedal released.