Is the bobcat 440 a skid steer loader?

Is the bobcat 440 a skid steer loader?

The Bobcat 440 B is a skid steer loader. It is powered by a two-cylinder engine. The 440 B has a universal skid steer quick hitch that allows adding many attachments, including buckets, harley rakes, trenchers, four-in-one buckets, pallet forks, dozer blades, grapple buckets, trench buckets, augers and stump grinders.

When did the bobcat 440 B come out?

The 440 B has a universal skid steer quick hitch that allows adding many attachments, including buckets, harley rakes, trenchers, four-in-one buckets, pallet forks, dozer blades, grapple buckets, trench buckets, augers and stump grinders. The Bobcat 440 B was in production for eight years, from 1985 to 1993.

How big is the engine in a bobcat?

The engine’s displacement is 42.19 cubic inches. Its rated operating capacity is 600 lbs. The engine has the Bobcat Interlock Control System (BICS) that requires the skid steerer operator to be seated with the seat bar in place and engine running before the hydraulic system and traction system can be engaged.

Where is the coolant recovery tank on a bobcat 440?

Use air pressure or water spray to clean the hydraulic/hydrostatic oil cooler (Fig. 1-25). 1 -3.8 Engine Cooling System (443) The cooling system has a coolant recovery tank. The location of the tank is on the right up-right on the engine compartment (Fig. 1-26). Check the coolant level, when the engine is cool. The recovery tank must be 1/3 full.

What’s the top speed of a bobcat 440?

The engine provides a top speed of 5.8 mph for the skid steerer. The Bobcat 440 B’s hydraulic system has a pump flow of 6.8 gallons per minute, and the pressure in the hydraulic lines is 1,350 pounds per square inch. The hydraulic arm, when extended, is 97.2 inches in length, 71.5 inches in height and 35.5 inches in width.

How big is a bobcat 440 B bucket?

The Bobcat 440 B’s hydraulic system has a pump flow of 6.8 gallons per minute, and the pressure in the hydraulic lines is 1,350 pounds per square inch. The hydraulic arm, when extended, is 97.2 inches in length, 71.5 inches in height and 35.5 inches in width. The bucket width is 36 inches and its capacity is 5.1 cubic feet.

What should I do if my Bobcat motor is overheating?

This type of bobcat’s motor does not use water it uses oil. It does have a radiator but instead of passing water through it, it should pass the oil but therefore the problem. The oil is not running through the radiator. What should I do? is this correct ? two side vents. I will try to clean the filters now.

What is the service manual for a bobcat?

This Service Manual gives the instructions for correct servicing, adjustment and overhauling of the Bobcat loader Hydraulic/Hydrostatic System, Drive System, Main Frame, Electrical System and Engine Service. Make reference to the Operator’s Manual for operating instructions (Starting, Daily Checks, Loader Operation, etc.).