What is a Stucchi block?
What is a Stucchi block?
The Saturn Block allows for easy connection/disconnection with residual pressure, with a user-friendly relief system that drains the residual pressure before connection and disconnection, for connection without pressure or effort to reduce injury risk.
How is quick disconnect size measured?
Lay the hose over a ruler or tape measure. If the hose is 5/8” wide it is a 3/8” ID hose. If the hose measures ¾” wide, it is a 1/2” ID hose. (2) Measure the internal diameter of the quick disconnect.
What is the difference between coupling and adapter?
A coupling can be a reducer, or reducing coupling, meaning they reduce flow by joining a larger pipe to a smaller size. Adapters are used when connecting two pipes of different types. For example, an adapter could be fitted on the end of a plain pipe to allow a threaded connection at the other side of the adapter.
What is the difference between coupling and reducer?
Good Question! The difference is actually quite straight forward. A reducing coupling is designed to accept pipes into either end. A 15mm to 10mm fitting reducer accepts a 10mm pipe into one end and the other end goes inside a 15mm fitting such as an elbow or coupling or tee.
How big of hydraulic quick connect couplers do I Need?
Click here to view our quick coupler identification chart. You can print out this identification chart to match up the the outlines of the male couplers. What body size of coupler do I need? View our Body Size Coupler Chart, to see the dimensions of male flat face, ISO-B, ISO-A, and agricultural style couplers.
Can You Go Green with hydraulic quick connectors?
Click to expand… Don’t sugar coat this Don, set him straight. Btw-my dealer is closed to walk in customers, you can call orders in and they’ll set your stuff outside the door. This is going to leave a mark, especially when they just started their go green event.
Where can I buy hydraulic quick connector O rings?
The SIZE 113 is available at box stores, plumbing supply stores, and other associated stores. When purchasing o-rings make sure they’re rated for hydraulic service, Buna N (nitrile) is the recommended material. Being that you got yours from an auto parts place, I’d think they’d be correct. Bob
Why are hydraulic connectors used in hydraulic systems?
Many of the most popular connectors used in hydraulic systems today have become standardized in this country and others, and the reason for their widespread acceptance generally has to do with their effectiveness at making a tight seal and preventing leakage.
