Why is my case 580se making a clicking sound?
Why is my case 580se making a clicking sound?
On some wiring systems a second solenoid is fitted on the firing wire from the switch this may be giving you a clicking sound you are hearing but it could be faulty or a fuse on the supply side of this solenoid may be dead.. Thanks for the reply. Yes, I have tried that item… no go. Have done the first corkie dot.
What to do if your 580K wont start?
My 580K you need to wiggle the shuttle lever to get it to engage most times. The linkages get some slop and don’t always make the switch contact properly. Have you tried holding the key in the start position and moving the shuttle lever? We have moved on and now were lost…. I need some advice in trouble shooting a problem.
Is there a problem starting a 580 se?
ALL NEW MEMBERS PLEASE READ THIS FIRST!!! Discussion in ‘ Tractor/Loader/Backhoes ‘ started by Jud, Jul 30, 2009 . I need some advice in trouble shooting a problem. Will do my best to describe the issue with a 580 se. Having problems trying to start it in the cab in normal start up mode. .
Where is the safety switch on a backhoe?
The switch then rests in the middle position for normal backhoe operation, unless the off position is selected by the operator to turn everything off. If you start the vehicle with the switch in the middle position, the safety will not allow backhoe operation until the momentary switch position is pressed.
On some wiring systems a second solenoid is fitted on the firing wire from the switch this may be giving you a clicking sound you are hearing but it could be faulty or a fuse on the supply side of this solenoid may be dead.. Thanks for the reply. Yes, I have tried that item… no go. Have done the first corkie dot.
My 580K you need to wiggle the shuttle lever to get it to engage most times. The linkages get some slop and don’t always make the switch contact properly. Have you tried holding the key in the start position and moving the shuttle lever? We have moved on and now were lost…. I need some advice in trouble shooting a problem.
ALL NEW MEMBERS PLEASE READ THIS FIRST!!! Discussion in ‘ Tractor/Loader/Backhoes ‘ started by Jud, Jul 30, 2009 . I need some advice in trouble shooting a problem. Will do my best to describe the issue with a 580 se. Having problems trying to start it in the cab in normal start up mode. .
What to do if your case 580 wont turn on?
Check with engine OFF, key switch on, and vehicle safely parked such that it will not move. If there is no LED active, then check for damaged wiring to the module and also check the connector to make sure the terminal pins are clean and not pushed out.
