What to do if your starter relay does not have power?
What to do if your starter relay does not have power?
If you do have power, pull the fuse and probe the terminals that the fuse plugs into to see which one has power. The one that does not have power is the wire going to your ignition switch. Set your multimeter to Ohms to check continuity.
Is there a no start no crank issue?
I have a no start no crank issue. It’s been running fine until yesterday. Car is an Astra H 1.7 CDTI 2004. With the ignition on, all dash lights are on but no crank. Brand new battery fully charged, starter motor and solenoid works fine when connected direct to battery.
What happens if I remove battery cable from starter solenoid?
Hi bud,ignoring those readings,for now,your starter solenoid will have a large terminal where battery cable terminates,and a solenoid terminal. If you remove this “start” connection,and run a wire from battery 12V to touch this,hands free and out of gear,what happens?
What kind of car has no starter motor?
Car is an Astra H 1.7 CDTI 2004. With the ignition on, all dash lights are on but no crank. Brand new battery fully charged, starter motor and solenoid works fine when connected direct to battery. Now trying to bypass the key ignition to get the starter to work, but i don’t understand the above results.
If you do have power, pull the fuse and probe the terminals that the fuse plugs into to see which one has power. The one that does not have power is the wire going to your ignition switch. Set your multimeter to Ohms to check continuity.
Where is the starter relay on a 7.3L?
Before you go pulling the starter, check the starter relay on the passenger side fender just behind the battery. If you jumper 12V to the small terminal, the relay should pull in and crank the starter. If it doesn’t check for voltage at the output terminal of the relay.
What should I do if my 7.3L wont start?
Before you go pulling the starter, check the starter relay on the passenger side fender just behind the battery. If you jumper 12V to the small terminal, the relay should pull in and crank the starter. If it doesn’t check for voltage at the output terminal of the relay. If you don’t get 12V there with the relay activated, then replace the relay.
Is the starter relay in the fuse box good?
No, when it cranks, it cranks and starts right up. Starter seems to be good. Batteries are good. Starter solenoid is is good (new). What does the starter relay in the fuse box look like?
Before you go pulling the starter, check the starter relay on the passenger side fender just behind the battery. If you jumper 12V to the small terminal, the relay should pull in and crank the starter. If it doesn’t check for voltage at the output terminal of the relay.
Before you go pulling the starter, check the starter relay on the passenger side fender just behind the battery. If you jumper 12V to the small terminal, the relay should pull in and crank the starter. If it doesn’t check for voltage at the output terminal of the relay. If you don’t get 12V there with the relay activated, then replace the relay.
Why does my car only start when I bypass the starter relay fuse?
If you replace both the starter and the battery I expect that will solve this problem. The fuse/relay involvement is a symptom, probably not the cause. You may have a shorted coil in the starter motor solenoid for example, which could cause this symptom. That’s part of the starter motor ass’y.
What does no start no crank no click mean?
If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that. In the old days, power flowed through the ignition switch and down to the starter solenoid. Not anymore.
Is the solenoid relay on the fire wall?
Howzit OJ No my solenoid relay is on my fire wall, just bought a brand new one and installed it 2 days ago. However maybe I have been using the wrong word to describe it , I’ve been calling it a starter solenoid and others have been calling it solenoid relay or starter relay but I have a picture of it.
Is there no crank on my Ford PowerStroke?
97 F350 7.3L Diesel. No crank situation when I turn the key to “start”. All dash lights, etc come on. I haven’t been able to find the answer, so I apologize in advance if this has been answered before. All fuses check out.