What kind of hydraulic horsepower does Bobcat 863 have?

The 863 high-flow option package provides an additional 10 GPM of flow, for a total auxiliary hydraulic flow of 30 GPM and 3000 PSI system pressure. This gives you the extra hydraulic horsepower required to operate Bobcat high-flow attachments.

What do you need to know about Bobcat error codes?

Error codes of mini loaders Bobcat will help you identify the faulty actuator and quickly repair the failed mechanism of both internal combustion engine and hydraulic system Signal PWM Controller front additional. Hydraulics at the upper limit of the range PWM Controller front additional.

What is the lift capacity of a bobcat?

A LEAP AHEAD IN PERFORMANCE! Experience the incredible power and smooth ride of the 863 G-Series extended wheelbase loader. It delivers 1900 pounds of lift (rated operating capacity), along with jobsite versatility, dependability and unmatched serviceability.

Why do you need a Bobcat construction vehicle?

Bobcat construction vehicles bring the unparalleled focus and expertise of the market leading manufacturer, and enables owner-operators and small businesses to access the level of engineering excellence, reliability and efficiency usually reserved for assets of a far higher capital outlay.

What kind of engine does the bobcat 863 have?

1. Engine. When it comes to Bobcat 863 specs, one notable feature of this skid steer loader is its powerful four-cylinder turbo-charged Deutz engine with diesel fuel and oil cooling. This engine features power that is rated at 73 hp.

Why does my 863 Bobcat not start up?

I have a 863 Bobcat that blows the alternator/ accessory fuse immediately upon turning the key to start the machine. Afterwards the machine must stop charging the battery and after 20-30 minutes or so engages the transmission lock. Then the battery is dead and will not restart the machine.

Is there an electrical problem with my Bobcat 873?

Neighbor had a 873 with the exact same symptoms. Hi, Also looking for electrical diagram and or manual for my bobcat 863 I just purchased. SN514441897. any info/links would be great. My machine is giving a glow plug alarm “GLO 09” would like to test relays, fuses, ect. but not sure what to test without drawings.

How many GPM does a bobcat hydraulic system have?

All that muscle in such a compact machine — only 82.3 inches high, 68 or 74 inches wide and just under 136 inches long! The 863 high-flow option package provides an additional 10 GPM of flow, for a total auxiliary hydraulic flow of 30 GPM and 3000 PSI system pressure.

What kind of engine does a bobcat have?

The 73 hp, 4-cylinder, turbo-charged, oil-cooled Deutz diesel engine produces plenty of 4-wheel-drive power that translates into impressive tractive effort and pushing ability. A 20 GPM pump and 3000 PSI generate excellent hydraulic breakout as well as power for running attachments, including augers, landscape rakes, tillers, breakers and others.

Are there any problems with the bobcat 863?

With proper maintenance and reasonable usage hours, you should not worry very much about Bobcat 863 problems. Most of the time, if they are ever-present, they involve only minor and inexpensive repairs. Want to know more about Bobcat 863 Specs?

What are the specs of a Bobcat skid steer?

Bobcat 863 Specs 1 Engine. When it comes to Bobcat 863 specs, one notable feature of this skid steer loader is its powerful four-cylinder turbo-charged Deutz engine with diesel fuel and oil cooling. 2 Performance. With this engine, this loader is expected to offer reasonable operating performance. 3 Speed. 4 Dimension.

Why does my Bobcat skid steer feel light?

Also pay attention to the operating capacity that we have explained above. Bobcat skid steer loaders tend to feel light in the back, especially if you are getting near to the 1900 lbs. limit. This problem is not because you use a used loader, but mostly because most Bobcat skid steer loaders feel that way.

What should the condition of a Bobcat loader be?

Your Bobcat loader should be in a worth-purchasing condition if its usage hour is somewhere around 1000 hours and if its parts are properly maintained. Check for cracks on the body and ensure that the engine and the hydraulic compartment are clean to confirm that the loader is properly maintained.

How to change aux solenoids on bobcat 863?

DDG : You can try switching the two aux solenoids around with each other on the valve. Disconnect the solenoid connectors, and then Swap the solenoids but keep the electrical connectors in the correct place on the valve so forward and reverse flow controls work correctly, and reconnect the electrical connectors.

Why are the auxillaries on my Bobcat not working?

When you lock the auxillaries in, they work fine for a few seconds or minutes, then the light starts flashing and they stop working. If you turn the machine off then on, they will start working again. I thought it was the solonoids so i replaced them and it still is doing it.

What is the problem with my Bobcat 863?

i have a bobcat 863, with front auxillary hydraulic electrical problems. When you lock the auxillaries in, they work fine for a few seconds or minutes, then the light starts flashing and they stop working. If you turn the machine off then on, they will start working again. I thought it was the solonoids so i replaced them and it still is doing it.

What kind of coupler does Bobcat hydraulics use?

Genuine Bobcat Flat Faced Hydraulic Couplers and replacement cartridges for blocks and hose fittings are made of stainless steel and offer quick connection and disconnection of attachments with no fluid spillage or air inclusion keeping equipment safe and clean.

Which is better Bobcat S850 or bobcat 863?

On paper, Bobcat 863’s Deutz engine is not much less powerful than the engine of the latest Bobcat’s skid steer loader model as of 2018, the S850 with its 92-hp engine. Bobcat 863 is a good choice for people looking for a sufficiently powerful skid steer loader with reasonable price.

Is the bobcat 863 skid steer loader a good car?

On paper, Bobcat 863’s Deutz engine is not much less powerful than the engine of the latest Bobcat’s skid steer loader model as of 2018, the S850 with its 92-hp engine. Bobcat 863 is a good choice for looking for a sufficiently powerful skid steer loader at a reasonable price. 2.

Where do the numbers go on a bobcat 863?

The easiest way to distinguish the three models is by looking at the headlights and the model’s decal. On the C-series model, the 863 numbers go from top to bottom, whereas they go from left to right on the other two. Here are some notable features that you can enjoy when using Bobcat 863.

What kind of hydraulic horsepower does Bobcat 863 have?