Is the JCB 540-170 a telehandler or a LOADALL?

Is the JCB 540-170 a telehandler or a LOADALL?

As with all JCB Construction telescopic handlers, the 540-170 has unrivalled productivity, efficiency, safety and serviceability as standard too. The backlit switches on a JCB 540-170 Loadall telehandler are crystal clear, even in the dark. And new instruments and a hi-res TFT screen form an intuitive automotive-style layout.

Can you fill the diesel tank on a JCB 540-170?

All daily checks and greasing on the JCB 540-170 can be performed at ground level. It’s also easy to fill the diesel and AdBlue tanks from ground level, with both tanks equipped with pre-filters in the filler necks to guard against dirt and contaminants.

Is the JCB 540-170 dry lubricant system durable?

A dry lubricant system means the JCB 540-170’s wear pads are extremely durable, with service intervals of 500 hours. This telehandler doesn’t use DPF technology, so there’s no loss of productivity during the regeneration process, nor the extra expense of replacing a DPF.

What kind of engine does a JCB LOADALL use?

The JCB 540-170 Loadall is a full-sized 4-stage telescopic handler with a huge reach. It’s efficiently powered by JCB’s DIESELMAX engine and it sits on a chassis that’s specially designed to provide the ultimate load-bearing and stability.

What is the speed of the JCB LOADALL 540-170?

JCB LOADALL |540 -170 A Product of Hard Work JCB powershift transmission incorporating torque converter, bevel box and a 4 speed powershift gearbox in one resiliently mounted unit. A combined steering column mounted switch incorporating directional control and 4 forward and 4 reverse powershift gears. Travel speed 25kph (18mph).

What are the flashing codes on a JCB injector 6 cylinder?

P0206 (flashing code 276) open circuit of the injector 6 cylinder control circuit P0237 (flashing code 32) failure of the boost pressure sensor (low voltage error, open circuit) P0238 (flashing code 32) failure of the boost pressure sensor (high voltage failure, short to negative)

What kind of transmission does a JCB LOADALL use?

JCB powershift transmission incorporating torque converter, bevel box and a 4 speed powershift gearbox in one resiliently mounted unit. A combined steering column mounted switch incorporating directional control and 4 forward and 4 reverse powershift gears. Travel speed 25kph (18mph). Optional 33kph transmission.

Is the grab / rotate counter clockwise solenoid open circuited?

130 GRB CW The grab/rotate clockwise solenoid is open-circuited. 131 GRB CCW The grab/rotate counter-clockwise solenoid is open-circuited. 132 LW FLOW The low flow solenoid is open-circuited. 133 ISOL The hydraulic isolator solenoid is open-circuited. 135 2 STAGE The 2nd stage relief solenoid is open-circuited.

When did JCB start making telehandler handlers?

Telescopic Handlers. JCB has been pioneering the telehandler concept since 1977. Since then, we’ve remained the world’s leading brand. The JCB telehandler range has come to epitomize the very highest levels of performance and productivity.

How long does a JCB telehandler battery last?

You can access the battery easily on this telescopic handler (and without specialist tools) via a lockable cover that’s opened with the ignition key. A dry lubricant system means the JCB 540-170’s wear pads are extremely durable, with service intervals of 500 hours.

How tall is a JCB telehandler lift machine?

Our telehandler range is over 30-strong, from compact models for accessing restricted sites to a 4.1-ton payload, 55 ft 9 in (17m) lift height machines. There’s a wide range of compactible attachments for these versatile machines.

What are the specifications of a JCB 550-170?

JCB 550-170 Specifications. Telescopic Forklift. Lifting and Cargo Handling. Telescopic Forklift JCB 550-170 124.9 l. 149.9 l. 4.4 l. Double-flow pump with a filter on the suction side and a filter at the output, enables the simultaneous fluid emission / reduction and increased / intake 1. Length up to fork surface 2. Between tyres width 3.

What kind of boom does a JCB telehandler use?

The JCB 510-55TC is a full-sized telehandler designed for productive use from the start until the end of your project; it is equally well suited for placing materials using forks or digging into dirt and aggregate piles with a bucket. The four-section boom is designed for extra strength with the exclusive JCB U-shape boom design…

How big is a JCB telescopic forklift?

JCB 550-170 Specifications. Telescopic Forklift. Lifting and Cargo Handling. Telescopic Forklift JCB 550-170 124.9 l. 149.9 l.

How big is a JCB telehandler LOADALL bucket?

The industry leading 508-66TC Loadall offers incredible reach of 66 feet and a maximum capacity of 8,500 lb, making this machine a highly efficient alternative… The JCB 509-23TC is a highly efficient telescopic handler powered by a JCB EcoMAX engine and with a chassis designed for work with buckets and forks.