How do you calculate CO2 emissions per km?
How do you calculate CO2 emissions per km?
In order to combust this carbon to CO2, 1939 grammes of oxygen is needed. The sum is then 727 + 1939 = 2666 grammes of CO2/kg of H-gas. An average consumption of 4,2 kg / 100 km then corresponds to 4,2 kg x 2666 g/kg = 112 g of CO2/km.
How much CO2 does a truck emit per km?
That implies that less than 5% of all vehiclesv on the road emit around 30% of road transport CO2 emissions, which can be explained by their high mileages – around 100,000 km per year for a long haul truck – and high fuel consumption – around 34,5 l/100km or 900g CO2/km.
How much CO2 does a diesel car produce per km?
121.5 g CO2/km
On average, the CO2 emissions of diesel cars (121.5 g CO2/km) are now very close to those of petrol cars (123.4 g CO2/km).
How is CO2 emissions calculated?
The simplest way to calculate tailpipe emissions of CO2 is to measure fuel consumption. Just add your fuel bills each period to see how much CO2 you have produced. Burning a litre of diesel produces around 2.62 kgs of carbon dioxide, whereas petrol has a lower carbon content and produces about 2.39 kgs.
What’s the top speed of a Cummins M11?
The M11-280E Plus engine is ideal for on-highway applications hauling up to 80,000 lb GCW for speeds up to 60 mph. This engine delivers outstanding performance in the 1200-1800 rpm range. The road speed governing feature of CELECT™ Plus provides precise control of top road speed and further improves fuel economy and performance.
What kind of gearing does a Cummins M11 use?
LINE-HAUL GEARING RECOMMENDATIONS. The M11-330E Plus and M11-330 ESP Plus are ideal engines for on-highway applications hauling up to 80,000 lb GCW for speeds up to 65 mph. Both engine ratings deliver outstanding performance in the 1200-1800 rpm range.
What are the emission factors in kg CO2?
Emission factors in kg CO2-equivalent per unit Category 1 Category 2 Category 3 Title Unit Emission factor (kg CO2eq per unit) Uncertainty
What is the governed speed of the m11-280e plus?
The M11-280E Plus with 2100 rpm governed speed is ideally suited for vocational applications. The higher governed speed matches well with overdrive and deep-reduction ratio transmissions. Vocational applications require special attention to low-speed maneuverability and startability.
The M11-280E Plus engine is ideal for on-highway applications hauling up to 80,000 lb GCW for speeds up to 60 mph. This engine delivers outstanding performance in the 1200-1800 rpm range. The road speed governing feature of CELECT™ Plus provides precise control of top road speed and further improves fuel economy and performance.
Can you get 500hp out of a Cummins M11?
all m-11 cylinder heads are 4 valve per cyl. You can get 500hp out of a M11 without emission equipment on there and it is reliable. Now I am not saying that they can all do that but we do have a truck at our shop that does have a 500hp test engine (M11) in it with an allision 6 speed auto behind it.
LINE-HAUL GEARING RECOMMENDATIONS. The M11-330E Plus and M11-330 ESP Plus are ideal engines for on-highway applications hauling up to 80,000 lb GCW for speeds up to 65 mph. Both engine ratings deliver outstanding performance in the 1200-1800 rpm range.
How many valves does a Cummins M11 engine have?
The 370-426 hp versions use a 4 valve cylinder head. There are ratings for fire service that go above that in a 2 valve engine, but those trucks run very short miles and producs their max hp under stationary pumping loads, so the running cycles are different.
