What are the tool groups on a caterpillar 3114 engine?
What are the tool groups on a caterpillar 3114 engine?
The 223-2454 Tool Group is used to check and perform all on-engine fuel system adjustments, including injector synchronization, timing, and fuel setting (rack) on Caterpillar 3114, 3116, and 3126 Engines equipped with mechanical unit injectors (MUI). The group also includes tools to remove and install the unit injectors and adjust the valves.
What is the synchronization tool on a Caterpillar 3116?
The synchronization tool is basically a premeasured block that is installed between the number one cylinder injector and the engine block, at which point the second part of the synchronization tool, a dial caliper, is used.
What kind of injector do caterpillars use?
The Cat 3116 injector is one of the most common injector types, and there are a number of different specialty tools and procedures that can aid in the installation and calibration of the Cat 3116 injector.
How to set valves and injectors cat 3116 diesel engine?
The timing specification is on the valve cover and the dial indicator has to be calibrated before checking injector timing. Rotate Engine 360 degrees to #6 compression stroke. As I stated before the valves can be adjusted with basic tools but the other procedures need to be performed with the CAT tune up kit.
What kind of tools do Cat caterpillars use?
CAT Caterpillar Tools If you’re in the market for a specialty tool for your CAT, we have what you need! Our specialty tools for Caterpillar include injector cup tube sleeve tools, front and rear main seal installer tools. We also have timing tools and additional parts to help you get the job done.
The timing specification is on the valve cover and the dial indicator has to be calibrated before checking injector timing. Rotate Engine 360 degrees to #6 compression stroke. As I stated before the valves can be adjusted with basic tools but the other procedures need to be performed with the CAT tune up kit.
Which is the best engine barring socket for Caterpillar?
ATC 38587 Engine Barring Socket For Caterpillar 3200 3406 Series & Mack E-7,E7 ETEC J-38587-A M10200 Caterpillar 3400 series Rear Crankshaft Seal/Wear Sleeve Installer REAR GEAR TRAIN ENGINE M10235 Front Wear Sleeve Installer For Caterpillar 3176, 3196, C-10, C-12 Engines 145-5247
Where do you set the compression on a cat 3116 engine?
The first position the engine has to be set on is # 1 Compression. Since # 6 cylinder is on the same throw on the crankshaft it will be on Top Dead Center along with # 1. All you need to do is rotate the engine over using a socket on the vibration dampner bolt while watching the exhaust valve on # 6 cylinder.
