Is the John Deere Gator 6×4 a cooling fan?
Is the John Deere Gator 6×4 a cooling fan?
John Deere Gator 6×4 Name: 6×4 cooling fan theory of wiringall.com The rest of the pages show both the wiring diagram and the individual.
What to do if your 6×4 Gator is overheating?
The 6×4 has 2 temp switches. One on the engine to turn on the light and one in the radiator to turn on the fan. If there is an air lock the hot light will turn on and the fan will not turn on due to lack of coolant flow. Getting rid of the air lock is a beach.
How can I Make my Deere Gator fan run?
You should be able to make your cooling fan run by simply grounding the black wire to the frame. If it does not run then the F2 fuse is blown. You indicated that when it is hot you can make the fan run by putting power to the red wire. This would indicate that the core temp switch is working and the fan motor is good.
Where does the cooling wire go on a Deere Gator?
The black wire on the cooling fan goes directly through the core temp sensor and the core temp sensor ground lead is grounded to the frame by a eyelet. The diagram that I have for your serial number gator only shows the cooling fan to have two wires, one red and one black.
How is the cooling fan on a Deere Gator controlled?
The cooling on off is controlled from the ground side by the radiator core temp switch. The black wire on the cooling fan goes directly through the core temp sensor and the core temp sensor ground lead is grounded to the frame by a eyelet.
The 6×4 has 2 temp switches. One on the engine to turn on the light and one in the radiator to turn on the fan. If there is an air lock the hot light will turn on and the fan will not turn on due to lack of coolant flow. Getting rid of the air lock is a beach.
Why is my Deere Gator over heating all the time?
The supply fuse does not supply power to any other function on the gator. The red/blue wire (this would be the wire on the machine harness) that goes to the cooling fan should be hot all the time via the F2 fuse. The cooling on off is controlled from the ground side by the radiator core temp switch.
Where is the fan on a green tractor?
The fan is activated on the ground side by the temp switch in the radiator. It will always have battery voltage as long as the key is on. Check for voltage to fan with key on then jumper a ground to see is fan comes on. As far as the leak goes..
