Where can I buy a Massey Ferguson 165 pump?
Where can I buy a Massey Ferguson 165 pump?
Here is a link to a UK site selling a 165 pump repair kit – can’t help with a US site but there must a kit available. By-the-way you will see there is a MkI and MkII MF165. If you will need to know which you have, see here http://www.tractordata.com/farm-tractors/000/7/4/746-massey-ferguson-165.html Hope this helps.
Can a hydraulic pump be replaced on a Massey?
Every hydraulic pump on a massey I have been asked to refit for someone who has removed the pump themselves required either a new control lever or some other part. For pump repairs may i suggest you use a trained Mechanic it may save you money in the long run as it is very easy to misdiagnose a problem .
What causes lift arms to judder on Massey Ferguson 165?
A common problem with the hydraulic lift on the Massey Ferguson 165 is when the lift arms begin to judder. Common symptoms are the need for high engine revs to get the tractor to lift and the normally smooth action of the lift arms becomes a shake or judder.
How to test hydraulics on a Massey Ferguson?
G’Day windemere. There is a hydraulic test port on the left hand side cover the one with the p.t.o. lever , it,s a small plug ,with the engine stopped remove the plug and install a pressure gauge good for 1500 psi ,start the engine and set the engine speed at say 1400 rpm, check the gauge and the pressure should be between 400;;750 psi.
Where can I buy Massey 165 tractor parts?
Tractor parts for Massey 165 tractors at All States Ag Parts. We carry new, rebuilt and used MF 165 tractor parts. Our inventory is always changing, if the part you need is not listed online, please call toll-free 877-530-4430. Save money with rebuilt and used parts! Save up to 70% with rebuilt and used parts compared to dealer new part pricing.
How much weight can a Massey Ferguson 165 lift?
The type I 3-point hitch is very reliable, capable to lift 3,594 lbs [1630 kg]. It is also worth noting that the live rear PTO runs at 540 rpms. The Massey Ferguson 165 has an open center hydraulics system with a 8 gal [30.3 L] capacity. The pump does the job pushing 4.5 gpm [17.0 lpm] fluids in the hydraulics system. Rod Bearing Set – 4 Brg.
When did the Massey Ferguson 165 go out of production?
In 1964, the very first Massey Ferguson 165 Tractors went out. They were produced until 1975. The original price of the Massey Ferguson 165 Tractor was $6,700 (1975). If you got it for less, you found a great deal! TractorJoe has plenty of Massey Ferguson 165 parts to keep it running.
Every hydraulic pump on a massey I have been asked to refit for someone who has removed the pump themselves required either a new control lever or some other part. For pump repairs may i suggest you use a trained Mechanic it may save you money in the long run as it is very easy to misdiagnose a problem .
What kind of hydraulics does a Massey Ferguson use?
I got her running after some tinkering etc. she runs great, but none of the hydraulics move at all. the dipstick on the side of trans which I believe is hydrualic fluid is filled up and looks perfectly clean. The town mechanic says for sure the hydraulics worked and they used a bushog on it till the day it was retired.
Where is the selector valve on a Massey Ferguson tractor?
Any way check under the seat next to and behind your right knee when sitting on the tractor If fitted the selector valve which has been said directs the oil to either the three point linkage or the external hydraulics (Note not both at the same time either one or the other) like a loader or other hydraulic equipment .
Is it a bear to fix a 165 with Multipower?
on a 165 with multipower it is a bear to fix the pump the tractor needs to be split. I’ll bet he does not have the levers correctly positioned. I had to replace my pump since it sat and the rings stuck and shattered (lucky staying in place) and the 3pt lift would not hold anything up after warm but it would still lift. Hi bsogorka.
What kind of hydraulics does a Massey Ferguson have?
It is also worth noting that the live rear PTO runs at 540 rpms. The Massey Ferguson 165 has an open center hydraulics system with a 8 gal [30.3 L] capacity. The pump does the job pushing 4.5 gpm [17.0 lpm] fluids in the hydraulics system.
Where is spool valve on Massey Ferguson 165?
The valve is small (going by memory here) with a black knob ( at least it is on mine) , and the hose for the spool valve comes off of it . on a 165 with multipower it is a bear to fix the pump the tractor needs to be split.
