What kind of fluid goes in a western plow?
What kind of fluid goes in a western plow?
Be sure to use genuine Western hydraulic oil from an authorized dealer (at Plow Parts Direct, we sell it by the quart and the gallon.)
What do you need to know about a Western snow plow?
Proper maintenance will help keep a snowplow working properly. Western snowplows operate hydraulically, using an electric pump to drive fluid to a ram inside the pump and the pistons on the plow. The pump looks like an electric motor with power cables and hydraulic lines attached to it.
Why is my snow plow blade not working?
It is easy to know that the blade assembly is malfunctioning because the motor itself is working properly. An easy fix and possible cause of the problem is that either the incorrect hydraulic fluid is being used, or the fluid level is too low.
How do you fill a Western snow plow pump?
Move the plow up and down and from side to side several times to purge any air from the system. If necessary, add more transmission fluid to fill the reservoir. Replace the filler plug and tighten it by turning it clockwise with the adjustable wrench. Wipe off any spilled fluid with a shop rag.
What should I do if my snow plow is clogged?
If this is the case, remove the accumulated snow and ice, and test the functionality. The hydraulic pump may also be clogged; the pump filter will have to be replaced, and he hydraulic system will have to be flushed and refilled before the plow will function properly. The vehicle battery may lack power. Replace the battery.
Where can I buy a Western snow plow?
We sell genuine Western snow plow parts. We maintain very large stock of parts ready for immediate shipment. Most orders shipped same day. Ultramount, Unimount, Pro, Pro Plus, Standard, MVP, Wideout, HTS Plows
What to do if your plow won’t raise?
J) DO NOT RAISE THE PLOW, power the controller and swing the plow to the left, wait 60sec..Swing the plow to the right, wait 60sec. Center the plow.
It is easy to know that the blade assembly is malfunctioning because the motor itself is working properly. An easy fix and possible cause of the problem is that either the incorrect hydraulic fluid is being used, or the fluid level is too low.
What’s the best way to swing a UniMount plow?
A) make sure the plow blade is sitting on a 2×4 (so you can swing it manually by hand) and the lift ram is all the way down.
