How steep of a slope can a dozer work on?
How steep of a slope can a dozer work on?
As with any piece of specialized equipment, the dozer has limitations. As a general guideline, dozers should not be operated across slopes (sidehill) greater than 45 percent, uphill slopes greater than 55 percent, or downhill on slopes greater than 75 percent (see Figure 1).
How much can a D10 dozer push?
The Cat D10 could be ordered with up to a 19-foot (5.8 m) U-blade, and weighed in at 180,000 lb (82,000 kg). Later versions weighed in at 190,000 lb (86,000 kg). The U-blade was 7 feet (2.1 m) high and could push 35 cu yd (27 m3) according to Caterpillar’s literature.
How much torque does a Cat D10 dozer have?
The C27 engine performs at full rated net power (SAE J1349/ISO 9249) of 447 kW (600 hp) at 1,800 rpm with a high torque rise of 21 percent (in forward gears), allowing the D10T2 to doze through tough material.
How much HP does a D10 have?
Engine
| Displacement | 1788 cu in (0 m) |
|---|---|
| Engine Model | D348 |
| Gross Power | 700 hp (522 kw) |
Can a dozer flip?
Very easy to flip them over. A dozer will travel up a steep slope forward better than backwards. This is because the weight of the blade takes the weight off of the rear of the tractor.
Can a dozer tip over?
❖ Although the slope of the hill was not extreme, adding various-sized material to the surface can increase the equipment’s operating angle. This could be material such as rocks, trees or other debris that can cause the dozer to slide and/or to tip.
How much horsepower does a D11 dozer have?
770 horsepower
Caterpillar D11 Dozer The D11 is powered by a3508 V-8 diesel engine, with a 770 horsepower.
What does a 2 1 slope mean?
Slope may also be referred to in terms of a ratio of the distance in which the land falls one foot. For example, a 33% slope may also be described as a “3:1 slope,” meaning the land falls 1 foot for ever 3 foot of distance. A 2:1 slope is also 50% slope, and a 1:1 slope is 100% slope.
What is a slope board?
Angled Boards (or slope boards) help children to maintain an upright sitting posture and a more extended wrist position while writing. An angled writing surface ishighly recommended by Occupational Therapists and Optometrists. They are designed at a 20 degree recommended angle.
What is the maximum slope that a d10 Dozer can work on?
Maximum drawbar pull 102200 kg (225312 lb) Maximum vertical drawbar load 31770 kg (70041 lb) The maximum line pull for the winch is 622751 N (140000 lb). The maximum slope that has the proper lubrication is 100 percent or 45 degrees. The capability of the brake is equal to the ROPS capability under a 45 degree slope.
How tall was the Caterpillar D10 bulldozer blade?
The U-blade was 7 feet (2.1 m) high and could push 35 cu yd (27 m 3) according to Caterpillar’s literature. The November 1977 issue of Excavating Contractor magazine had a 2-page story on the bulldozer titled “Cat Uncorks The New D10”. One of the first D10s is currently sitting in front of the East Peoria, Ill plant where it was made.
How tall is a Caterpillar D10 tracked tractor?
Caterpillar D10 Specifications. Tracked Tractor. Construction Machinery. Tracked Tractor Caterpillar D10 1446 l. 29.3 l. 3. Height to cab upper part 4. Caterpillar track length on ground level 5. Clearance 6. Length without blade 1. Length with blade 2. Width between caterpillar tracks 7. Track width 8. Standard shoe size
How much oil can a d10 Dozer use?
Note: When you are operating on severe slopes, the quantity of oil in the transmission can be increased up to 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high transmission oil temperatures.
Maximum drawbar pull 102200 kg (225312 lb) Maximum vertical drawbar load 31770 kg (70041 lb) The maximum line pull for the winch is 622751 N (140000 lb). The maximum slope that has the proper lubrication is 100 percent or 45 degrees. The capability of the brake is equal to the ROPS capability under a 45 degree slope.
Note: When you are operating on severe slopes, the quantity of oil in the transmission can be increased up to 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high transmission oil temperatures.
When does a dozer start to slide sideways?
Most dozers will start to slide sideways from about 1.5:1 onwards. Wide gauge machines have a definite edge in the stability department but are still prone to slide after 1.5:1.
Where is the remote lubrication on a dozer d10t2?
• The remote lubrication for the D10T 2 is performed from a service point conveniently located on the left hand fender and allows an operator or service technician to lubricate both the left-hand and right-hand equalizer bar end pin bearings and pins from one service point.
