What kind of engine does Bobcat 773 have?

Bobcat 773, just like all 700-series skid steer loaders, comes with a 4-cylinder Kubota diesel engine. At 46 horsepower, it is more powerful than the 40-hp 753 and shares similar power with the 763 models.

Can you buy a Bobcat skid steer loader?

Buying a used skid steer loader requires you to understand Bobcat 773 specs and understand Bobcat 773 problems, be they problems inherent in the model or problems associated with used equipment in general. Bobcat 773 is known for its oversized arms, which give it a higher and longer reach when lifting the load.

How many hours does a Bobcat loader need?

The longer it is used, the more prone it is to problems. The most reasonable operational hours for a used loader are between 1000 and 2000 hours. You should buy the machine as a second owner, though it may not be easy, especially if you buy a decades-old machine.

What makes a 773 G series loader so good?

The 773’s low-profile, vertical-path lift arm design and innovative G-Series cab enhance the operator’s view to key areas during operation: the sides, front and rear corners of the loader. Even with the optional front door, the 773 G-Series offers the operator increased visibility.

What kind of engine does a Bobcat skid loader use?

En… BOBCAT 773 REMAN ENGINE TURBO, This Engine Fits 773 Bobcat Skid Loader,Engine Is Remanufacture/Rebuilt TURBO CHARGED ENGINE SPEC& ENGINE HAS NO TURBO BOBCAT REMAN ENGINE 743,753,763,773,7753,S130,S150,S175 REMAN KUBOTA ENGINES TO FIT BOBCAT SKID LOADERS REMAN ENGINE AND KUBOTA ENGINE OEM PARTS READY…

What’s the speed of a Bobcat skid steer?

In terms of speed, Bobcat 773 offers decent travel speed up to 7 mph (11 km/hr.). Unlike its more modern counterparts, Bobcat 773 doesn’t support two-speed option to increase its travel speed. Bobcat 773 is the biggest skid steer loader in the 700 series, but it is still considered a compact machine.

Is there a bobcat Modelo 773 Mini Loader?

BOBCAT MODELO 773 mini loader with controls in the hands. It is equipped with a spoon. You can see and try in our facilities, price to comment.

Which is Bobcat loader has a transverse engine?

943 is the second Bobcat loader with the engine mounted transversely, allowing the hydrostatic drive pumps to be belt-driven for more efficiency, lower noise and easier service access for routine maintenance. This transverse engine design is repeated on succeeding loader generations and continues today.

When was the last Bobcat clutch drive loader made?

M610, with a Wisconsin gas engine and 1,000 lb. rated capacity, will remain the most popular Bobcat model for the next decade. When the last M610 rolls off the assembly line in 1982, it signifies the end of the clutch-drive loader and the transition to diesel powered equipment.

What kind of engine does a bobcat 743 have?

I have a bobcat 743 with Kubota v1702 engine. Machine has 7500 hours and in good condition, except engine. It’s always been a hard starting SOB since my dad bought it 20 years ago. I bought it from him 5 years ago. It hasn’t ran in 2 years, and last it did it was only on 3 cylinders.

Where is the lift pump on a bobcat 743b?

If the 743B used the same engine as the 743 there should be a lift pump mounted on the side of the injection pump housing. With the things you’ve described, most likely failed lift pump.

What should I do if my Bobcat 743b stalls?

Basicly motor bogs down and stall’s out change filter and all is well . If I recall correctly, I think the 743 and 743B used the rubber primer bulb in the fuel line. If so, when it stalls, immediately see if that primer bulb is sucked flat. If I recall correctly, I think the 743 and 743B used the rubber primer bulb in the fuel line.

What kind of engine does Bobcat skid loader use?

BOBCAT 743 Reman Kubota Engine, This Engine Fits 743 Bobcat Skid Loader,Engine Is Remanufacture/Rebuilt With Kubota Oem Parts, We Are A Kubota Engin… BOBCAT 743 Engine, Re-manufactured Kubota engine to fit 743 Bobcat Skid loader ,engines sells with 1 yr warranty from date of invoice,engine is buil…

Where is the hydraulic interlock valve on a bobcat 773?

Your hydraulic main control valve should look similar to the one in the pic below, the red arrow points to the BICS solenoid that controls the hydraulic interlock valve, that solenoid has to be powered up to unlock the lift/tilt functions and it’s controlled by the BICS controller to the right of the seat.

Is the valve on a bobcat C series?

Our bobcat is a C series. On the BICS its called the valve. The valve the seat bar and system activated lights on the BICS are not lit up either. As for the seat switch its never been connected and was running fine before hand.

How many Bobcat mover parts are in stock?

Mover Parts Cooling Fan Pulley Tensioner Kit 6662997 6702474 for Bobcat 653 751 753 763 773 7753 853 863 864 873 883 963 A220 A300 S130 S150 S160 S175 S185 S205 S220 S250 S300 T140 T180 T190 T200 T250 . Only 16 left in stock – order soon.

What to do if your bobcat won’t move?

2000 bobcat 773 will not… 2000 bobcat 773 will not move. Parking brake locked. Appears no power is going to brake solenoid. Both circuits, pull and hold, check good. Fuse, relay, foot switch, and seat lock all good. All lights except park brake come on when “push to operate” is engaged. Pushing traction lock bypass has no effect.

Where is the parking brake switch on a bobcat?

That type of parking brake switch was used on the earlier C and F series machine and it spilled over into the very early G series machines (which yours would be), the later model G series machine used a rocker switch on the center cab panel in between the left and right control panels.

Why is the solenoid not working on my Bobcat?

The hold coil doesn’t have enough power to pull the solenoid spool in, that’s where the pull coil has to be powered up to help pull the spool, but that coil can only be powered up for a few seconds or it will burn up the solenoid. Once the spool is pulled in the hold coil takes over to hold the spool in.

What kind of engine does Bobcat 773 have?