Is the CAT 3406 a good engine?

In terms of failure, the 3406E is actually pretty good, especially compared to some other Caterpillar engines. However, like all engines, they still had their issues. This was fixed when the engine upgraded to the C15, and seals replaced gaskets, along with a new block design.

How much does it cost to rebuild a cat 3406e?

We charge roughly $10,000 for a rebuild including labor for a standard in frame with OE parts.

How much fuel pressure should a 3406b have?

Is your engine having a low fuel pressure problem? The fuel pressure should stay between 35 to 45 psi at all times. Also, elevating the fuel pressure will not help on a 3406 engine. Sorry.

What is a cat Platinum overhaul?

The PLATINUM overhaul kit includes all the components from the Gold kit plus a Cat Reman cylinder head assembly, Cat Reman fuel injectors, a Cat Reman water pump, and a Cat Reman oil pump.

Is the cat 3406 engine a good engine?

Usually about 800 bucks used to be done every 300K to 350K on the “B” series engines, not required on the “E” series like I have, unless oil analysis says to do it. Don’t worry. It is a great engine.

What is a cat 3406c doing in a 1998 Pete?

A 3406c is basically the same as a B model except it has electronic accelerator and fuel measuring. The engine is really simple to work on. What I question is…what is a 3406c doing in a 1998 Pete? The 3406E was the Cat engine for that year.

When did cat 3406 go to electronically controlled pump?

The 3406A & B were both running on a Mechanical F. Injection Pump, But the 3406C went to an Electronically Controlled pump about 1990 or 1991 – Correct ? ? Also, Are there Any shops left that can Rebuild/ Overhaul the old Mechanical Pump ?

How much does a Caterpillar CAT 3116 engine cost?

It is extremely hard to time the fuel system and like the VW on the automotive side, working on the CAT 3116 requires special tooling you can only buy from Caterpillar. Typically, it costs up to $5000 in tooling to work on the 3116.

What’s the difference between a cat 3406b and a 3406E?

A 3406B was a good engine in it’s time, but was quickly dropped in our area when the N14, and the series 60 came out. You would get 650,000K before the head gasket would leak and the back 3 to 4 kits had to be pulled and the block cut, water pumps leaked every 6 months, they modified the head to increase flow it made it better.

Are there any oil leaks in the Caterpillar 3406E?

However, as with all engines, there are usually a few issues that are well known. You may have heard of oil leaks with the 3406E. A common spot for leaks is near the rear side of the engine around the spacer plate and the cylinder block. During the production of the 3406E, Caterpillar wasn’t using the best gaskets.

Is the CAT 3406 a good engine?