How much does a Komatsu 138 excavator weight?
How much does a Komatsu 138 excavator weight?
Operating Weight
| Triple-Grouser | Operating Weight | Ground Pressure |
|---|---|---|
| 500 mm 20″ | 15682 kg 34,563 lb | 45.29 kPa / 0.46 kg/cm 2 6.57 psi |
| 600 mm 24″ | 15732 kg 35,673 lb | 37.86 kPa / 0.39 kg/cm 2 5.49 psi |
| 700 mm 28″ | 15932 kg 35,114 lb | 32.87 kPa / 0.34 kg/cm 2 4.77 psi |
What do Komatsu model numbers mean?
The model identification on komatsu is fairly easy to understand. The D would be for dozer which you would know. Numbers are to identify size and transmission type. D40, 50, 60, 80, 150 is direct drive. D45, 65, 85, 135, 155 etc is power shift.
How much does a Komatsu 238 weigh?
Operating Weight Approximate
| Shoes | Operating Weight | Ground Pressure |
|---|---|---|
| Road Liner 600 mm 24″ | 24600 kg 54,230 lb | 51.1 kPa 0.52 kg/cm² 7.41 psi |
| 700 mm 28″ | 24870 kg 54,825 lb | 44.29 kPa 0.45 kg/cm² 6.42 psi |
| 800 mm 31.5″ | 25150 kg 55,440 lb | 39.19 kPa 0.39 kg/cm² 5.68 psi |
What does LC mean on an excavator?
The “LC” here means that the model uses widened longer track, the purpose of the same is to increase the contact area with the ground, generally used in the construction of soft ground conditions. The letter “L” has many “excavator” models with the word “L”, which refers to the “longer type crawler”.
How much does a 336 excavator weight?
81,900 pounds
The next-generation 336 Caterpillar excavator has an operating weight of 81,900 pounds and maximum dig depth of 26 feet 9 inches with a 12-foot-10-inch stick. Integrated Cat Connect technology includes Cat Grade with 2D, Grade Assist, Cat payload, and a geo-fence.
How much does a Komatsu 360 weight?
Operating Weight (approximate)
| Shoes | 700 mm | 28″ |
|---|---|---|
| Operating Weight | 35748 kg | 78,645 lb |
| Ground Pressure | 0.59 kg/cm² | 8.35 psi |
| Shoes | 800 mm | 31.5” |
| Operating Weight: | 36129 kg | 79,483 lb |
What kind of oil should I use for a low load gearbox?
The benefit of rust-prevention gear oils is that they extend the life of the gears while allowing the gears to run at high temperatures. This gearbox oil is best used in low-load gearboxes.
What should the temperature of oil inside a gearbox be?
If so, the oil inside the gearbox may be 5-8 degrees higher. You might need to install a cooling system to better control the lubricant temperature. Also, consider the possibility of combined failure modes in parallel.
What kind of gear oil does O’Reilly use?
Replacing your synthetic gear oil can restore proper shifting and provide protection against wear and tear. O’Reilly Auto Parts offers gear oil, including synthetic gear oil, for use in most cars, trucks, and SUVs.
Which is the best lubricant for boundary gear?
They do not perform well or prevent wear under boundary lubrication conditions. Antiscuff gear lubricants, commonly referred to as extreme pressure (EP) lubricants, have some performance capabilities that exceed those for R&O oils.
