How much oil is in a JCB 214 backhoe?

Discussion in ‘ Tractor/Loader/Backhoes ‘ started by idahosafari, Jul 10, 2013 . I have a JCB 214 Series 3 backhoe with 1775 hrs. on it. I bought it last fall, did a full service, changed all filters and fluids, including the transmission.

What kind of oil does a JCB transmission use?

JCB Genuine Gear and Transmission Oil. JCB offer a wide selection of high quality gear and transmission oils, which meet every aspect of a vehicle’s transmission system. The range includes oils for gearboxes, torque converters, axles and oil immersed brakes.

What should the Trans pressure be on a JCB shuttle?

The JCB trans oil is a 10 weight oil, clear…here’s a pic of it. The oil pressure sensor is up on the top if its a syncro shuttle or power shift with a plug type fitting.The trans pressure should be between 9.5 – 11 bar depending on temp of oil.

Why does my JCB oil pressure keep dropping?

If you have a gauge on the test port when you select a gear the pressure will drop and then should come back up again. You may have a problem with the pressure relief valve in the box in as far as week spring but only once in all the years playing with these JCBs.

What’s the top speed of a JCB 532-120?

The Telehandler 532-120 JCB is designed to travel at a top speed of 20/32km/h. It can operate with up to 8m of horizontal reach. 3.2t is its maximum nominal load capacity with a 500mm center of gravity. The 532-120 has a lift height of 12m, to which it can lift 3.2t. The JCB 532-120 can operate up to 1.25t at full forward reach.

How big is a JCB 532-120 telehandler tyre?

The model’s dimensions are 5.84m x 2.35m x 2.59m. 15.5-25 is the size of standard tyres equipped on this JCB 532-120 telehandler. The Telehandler 532-120 JCB is designed to travel at a top speed of 20/32km/h. It can operate with up to 8m of horizontal reach.

How to install JCB engine transmission assembly on YouTube?

Jcb engine- transmission assembly install. – YouTube If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: ChABrtrGxSW9qHFo) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Which is the best backhoe loader from JCB?

From the 50hp 1CX with an 8’4” dig depth to the 100hp 4CX-17 with a 21’6” dig depth, we’ve got virtually every type of backhoe loader covered. Exceptional versatility, thanks… JCB | COMPLETE PRODUCT RANGE BACKHOE LOADERS 1CX MIDI CX 2CX 3C 3CX 4CX 6

Why is the oil in my JCB torque converter red?

There must have been a little oil left in the torque converter because the oil has a red tinge to it even though the JCB oil is clear. I would have thought that if those two wouldn’t combine I would have had problems earlier. It sounds like JCB’s are plagued with electrical problems.

What kind of remanufactured transmissions do JCB make?

JCB Transmissions. JCB offers a comprehensive, high quality remanufactured transmission range, offering products from 4-speed synchromesh to 6-speed powershift gearboxes, all manufactured to the latest specifications, incorporating the most up-to-date design improvements. Strip-down, rebuild and testing is undertaken by JCB trained engineers in…

What to do if your JCB 214 transmission goes bad?

First check to make sure your battery voltage is >11 volts when this occurs. If it is lower the relays / transmission valves don’t have enough energy to shift. Second, check to see if the layshaft relay is functioning. If it is going bad it will sometimes shift into 3rd/4th and sometimes not.

What do you replace seals on at JCB?

Seals, gaskets and sealing parts, lock plates, input and output bearings, oil filters and any parts not to the latest test specifications are all replaced with genuine OEM parts. Finally, the unit is calibrated and tested to JCB’s latest specifications.

What kind of transmission fluid does a JCB 214 use?

Discussion in ‘ Tractor/Loader/Backhoes ‘ started by Olmedic, Nov 5, 2011 . I just recently bought my first backhoe. It is a 98 JCB 214 Series 2.

Why do you need to use JCB engine oil?

This means that JCB oil will provide optimum protection during engine start-up, a key time for engine wear protection. JCB oils have a specified level of anti-wear additive required to prevent premature wear/failure of camshafts, pumps, etc. Tests have shown this is up to 25% more additive than lower cost oils. Why buy JCB Engine oil ? – YouTube

What’s the difference between JCB oil and lower cost oils?

Lower cost oils can provide up to 35% less which could lead to premature wear of key hydraulic components. JCB specifies a minimum cleanliness level in line with ISO4406 17/15/12 Cleanliness code. This can be as much as 30 times cleaner than lower cost alternatives, preventing potential abrasive and harmful particles.

Discussion in ‘ Tractor/Loader/Backhoes ‘ started by Olmedic, Nov 5, 2011 . I just recently bought my first backhoe. It is a 98 JCB 214 Series 2.

What kind of lubricants do you use at JCB?

JCB offers: 1 Wide range of specialist lubricants for all applications 2 High quality base oils 3 Blended with sophisticated additive packages 4 Antifreeze for all conditions 5 Quality service fluids for all applications 6 Selection of high quality lubricant handling equipment More

How much oil is in a JCB 214 backhoe?