Is there a hydraulic problem on my Bobcat 773?

Ok as said in the title we have a hydraulic problem on our bobcat 773. The bobcat runs fine and drives fine but the tilt and raise will not work. Its like it is not disengaging. The bar that you pull down is unlocking the pedals. When you try and tilt or raise it does load the engine up but doesnt move.

How to repair a Bobcat skid loader hub?

Since 2003, we have used this design in our home town business to complete axle hub repairs on S series, 700 and 800 series, Bobcat Skid Loaders. An Installation is easily completed using standard bearing and seal kits. All repair hub kits come with complete installation instructions.

Why does the tilt and raise on my Bobcat not work?

The bobcat runs fine and drives fine but the tilt and raise will not work. Its like it is not disengaging. The bar that you pull down is unlocking the pedals. When you try and tilt or raise it does load the engine up but doesnt move. On the back of the cab right next to the seat theres like 5 lights.

How big is the bobcat service manual file?

40 MB in .zip format for super fast downloads! This factory BOBCAT Service Manual Download will give you complete step-by-step information on repair, servicing, and preventative maintenance for your Bobcat.

How does the BICS controller work on a bobcat?

The BICS controller gets inputs from the seat switch, lap bar, and enable button (if equipped). Once it gets input from these components it sends voltage to the BICS solenoid valve to unlock the lift/tilt functions. DarenK likes this.

Is the valve on a bobcat C series?

Our bobcat is a C series. On the BICS its called the valve. The valve the seat bar and system activated lights on the BICS are not lit up either. As for the seat switch its never been connected and was running fine before hand.

Which is the main Lockout on bobcat Hyd valves?

Later C series incorporated the interlock valve on the main control valve and became the main lockout on Bobcat main hyd valves, later they added solenoid spool locks as well.

What to do if your bobcat won’t move?

2000 bobcat 773 will not… 2000 bobcat 773 will not move. Parking brake locked. Appears no power is going to brake solenoid. Both circuits, pull and hold, check good. Fuse, relay, foot switch, and seat lock all good. All lights except park brake come on when “push to operate” is engaged. Pushing traction lock bypass has no effect.

Why is the parking brake on my Bobcat not working?

Parking brake locked. Appears no power is going to brake solenoid. Both circuits, pull and hold, check good. Fuse, relay, foot switch, and seat lock all good. All lights except park brake come on when “push to operate” is engaged. Pushing traction lock bypass has no effect. Codes read “none”. All visible wiring appears good.

Why is the solenoid not working on my Bobcat?

The hold coil doesn’t have enough power to pull the solenoid spool in, that’s where the pull coil has to be powered up to help pull the spool, but that coil can only be powered up for a few seconds or it will burn up the solenoid. Once the spool is pulled in the hold coil takes over to hold the spool in.

How does the ECU work on a bobcat?

The ECU then does two things, 1) is sends a direct voltage signal to the red wire (hold) on the solenoid, and 2) it sends a voltage signal to the parking brake relay in the fuse box.

Can you buy a Bobcat skid steer loader?

Buying a used skid steer loader requires you to understand Bobcat 773 specs and understand Bobcat 773 problems, be they problems inherent in the model or problems associated with used equipment in general. Bobcat 773 is known for its oversized arms, which give it a higher and longer reach when lifting the load.

How many hours does a Bobcat loader need?

The longer it is used, the more prone it is to problems. The most reasonable operational hours for a used loader are between 1000 and 2000 hours. You should buy the machine as a second owner, though it may not be easy, especially if you buy a decades-old machine.

Can a bobcat hydraulic pump motor be rebuilt?

We can overhaul and rebuild most hydraulic pump motors and you should consider sending us your old pump for a thorough inspection and free repair quote today. Bobcat hydraulic pumps are our specialty but we repair many other brand names as well. Call us today and let’s work together. Loading…

What’s the speed of a Bobcat skid steer?

In terms of speed, Bobcat 773 offers decent travel speed up to 7 mph (11 km/hr.). Unlike its more modern counterparts, Bobcat 773 doesn’t support two-speed option to increase its travel speed. Bobcat 773 is the biggest skid steer loader in the 700 series, but it is still considered a compact machine.

Can you run Bobcat hydraulic fluid on a skid steer?

So bobcat is telling me to only run “Bobcat Brand” hydraulic fluid through my 07 335 mini ex, is there any reason i cant just run standard 10w-30 like on my skid steer? Is this just a sales pitch or is there a legitimate reason for using there fluid other than making more money

Is the bobcat model 763 skid steer no lift?

Bobcat model 763 skid steer no lift no tilt. – YouTube Bobcat model 763 skid steer no lift no tilt. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What is the actuator number on a bobcat lift?

The Bobcat AHC actuator part number is 7104842 for the old style AHC controller. The newer actuator part number is 7101672 which is for use in machines that have a plastic AHC controller housing.

Do you have a bobcat T300 with 700 hours?

We have a Bobcat T300 with 700 hours (

What should I do if my Bobcat loader is not running?

Do not overfill the reservoir; hydraulics work best with the exact amount of fluid in the system. Check the hydraulic fuel filter. If it’s clogged and fluid can’t flow freely, power to the loader will be reduced. Be sure the hydraulic pump (located in front of the engine) is operating to specifications.

How to turn on auxiliary hydraulics on a bobcat?

Click to expand… Just to confirm the way a Bobcat works, you push the button on the left console to activate the auxiliary circuit. Once you’ve done that, there’s a thumb switch on the right control lever, move it to the left and to the right from center to operate the auxiliary hydraulics.

What kind of engine does a bobcat have?

The Bobcat loader has a rear-mounted diesel engine. If the engine won’t start or is not operating properly, start by checking the fuel system (tank, fuel lines and fuel filters). Diesel fuel filters need to be changed on a regular basis, more often in dusty work environments.

What kind of hydraulics does a bobcat T190 have?

Discussion in ‘ Skid Steers ‘ started by steve (ill), May 2, 2015 . Son has a T190 with a high flow (26 gmp) aux hydraulic fittings on the boom. He just took the bucket off and put on a clam shell type bucket. Apparently the clam will open, but not close.

Is the ignition Swith on a bobcat 753?

It shows”Ignition Swith Multiple Keys” . I replaced the swith itself and n … read more Have bobcat 753 (older model)will not start with key,but will stars when jumped at solenoid. Once running, it moves and steers, but have no bucket control.

Do you need to replace a bobcat ignition switch?

If you need to replace your Bobcat key panel, ignition switch, wiring, or other electrical component, you’ll find the right parts for your equipment. Genuine Bobcat electrical parts are engineered for your equipment, so you can be confident knowing you’ll receive exactly what you need to keep your skid steer loader up-and-running.

Are there any electrical parts in a bobcat?

Genuine Bobcat electrical parts are engineered for your equipment, so you can be confident knowing you’ll receive exactly what you need to keep your skid steer loader up-and-running. You have no items in your parts list.

Where do I find the fault code on my Bobcat?

First select your vehicle and then find the fault code in that page. Although we try our best to provide our visitors with the most accurate information that we can find about your skid steer, we cannot be held responsible for any errors. Bobcat is equipped with a universal skid steer quick hitch.

What is the problem with the bobcat S300?

We are having a problem with the bobcat s300 that we have. You start it up and seconds after that the tilt/lift light comes one. ACS error. The reference guide just says acs error tilt/lift. We noticed it was a bit damp under the cab so we took the cab back and left it inside all weekend with a fan on it in a heated shop.

Why is my Bobcat loader in Fail mode?

If the initial Actuator Test results in a fail mode due to a slow return to neutral, follow the troubleshooting tree to pinpoint the probable cause. If the Actuator Test fails after the hydraulic oil is warmed,go to the next step and loosen the bolts that mount the actuator to the control valve.

Why is my bobocat 763 not lifting anything?

Our is a JD, but it does something similar. It is very likely to be a safety interlock problem instead of a real problem (like frozen something or low fluid, etc.) because it’s an intermittent problem and the pedals are LOCKED. The safety system locks the pedals (literally) on the JD, but you can still move the machine.

Is the bobcat 763 able to move snow?

What’s New? I have am using a Bobcat 763 to move snow. We used it all day yesterday and not problem and today it will not lift. It moves forward just no lifting of the bucket. What could be the problem?

Where is the seat bar switch on a bobcat?

It’s located on the left side and needs to be working to allow the machine to move. My seat bar would only work in random positions and the spline on the indexing bushing was worn out. Loading…

Which is the most powerful Bobcat skid steer loader?

Of all 700-series models, Bobcat 773 is the one with the heaviest engine, which contributes to its improved operational capacity. Bobcat 773’s rated operating capacity and tipping load are 1700 lbs. (771 kg) and 3800 lbs. (1724 kg) respectively, making it the most powerful skid steer loader in Bobcat’s 700-series models.

Later C series incorporated the interlock valve on the main control valve and became the main lockout on Bobcat main hyd valves, later they added solenoid spool locks as well.

Why does my Bobcat 753 loose lift and tilt?

I have a Bobcat 753F which works great for about the first 20 minutes, then I loose lift and tilt on the bucket, but it still drives. If I let it sit for a few hours the bucket functions come back just for a much shorter time. I thought it was the BICs solenoid, however when I replaced it the problem still exists.

Is the bobcat lift tilt actuator bad?

Based on the post located here: http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=20221 , I switched the wires to see what would happen. The code switched from 32-50 (tilt actuator short to ground) to 32-49 (lift actuator short to ground), so I guess supports the idea that the actuator is bad.

Can a bobcat 753 drive a skid steer?

Discussion in ‘ Skid Steers ‘ started by calliso6, Apr 19, 2014 . I have a Bobcat 753F which works great for about the first 20 minutes, then I loose lift and tilt on the bucket, but it still drives.

How are bolts slotted on a creeping Bobcat?

The bolt holes on right bar are round, the holes for the left bar are slotted. Lock down the bolts in the right bar, but leave the ones in the slotted holes for left bar loose to make adjustment. continued… Michael Lapointe and Mauna like this.

How does a bobcat 773 skid steer work?

2000 Bobcat 773 Skid Steer Hours-3,405 OROPS Aux. hydraulics Hand/Foot controls Manual quick coupler GP bucket Unit starts, runs, and drives. Bucket tilt functions normal. Loader arms will go up but will not go down.

How much does a bobcat 773 cost at auction?

SAME SIZE AS S175 Buyer’s premium included in price USD $1,000 Bobcat 773, Open ROPS, Rear Glass, Diesel Engine, Hydro, Front Aux. Hyd., Foot Control, 60″ Bucket, 10-16.5 Tires, 2494 hrs. Showing On Meter.

What kind of engine does a 1995 bobcat have?

1995 Bobcat 773 equipped with cab/ heat , bucket, and powered by a Kubota diesel. Just traded from local customer SOLID 773. COMES WITH STANDARD 68″ BUCKET (NOT PICTURED) .

Where is hydraulic fluid on bobcat 753 skid steer?

Bobcat 753 “gushing” hydraulic fluid beneath seat on right hand side of machine. Discussion in ‘ Skid Steers ‘ started by CarpenterRick, Sep 8, 2011 . Machine was running great, has approx 1800 hrs. All of the sudden a warning buzzer went off and hydraulic fluid was dumping from the underside of the machine.

Where does the hydraulic fluid go in a bobcat?

All of the sudden a warning buzzer went off and hydraulic fluid was dumping from the underside of the machine. Refilled with fluid, cab up, started machine, no visible leaks but fluid is rapidly collecting on right hand side. Literally lost 3 gallons of new fluid in seconds.

How much hydraulic oil is in a 2002 Bobcat?

Discussion in ‘ Skid Steers ‘ started by skidrowe, Apr 21, 2009 . Just bought a 2002 773G bobcat, hydraulic oil is low so I called dealer. A 2.5 gallon jug is $40 , it just seemed pretty high . Is their hydraulic oil that good or can I buy another brand that is as good or better for a better price.

Can you use standary hydraulic fluid on a bobcat?

Standary hydraulic fluid will DAMAGE Bobcat pumps and seals. I have read on other forums where the skidsteers can either run on the recommended Bobcat brand hydraulic fluid or 10w 30 motor oil will suffice once they are out of warranty. That might sound odd but that is what is posted be reliable sources.

Where is the gushing fluid on the bobcat?

Welcome to HeavyEquipmentForums.com!! ALL NEW MEMBERS PLEASE READ THIS FIRST!!! Bobcat 753 “gushing” hydraulic fluid beneath seat on right hand side of machine. Discussion in ‘ Skid Steers ‘ started by CarpenterRick, Sep 8, 2011 . Machine was running great, has approx 1800 hrs.

What to do if your bobcat won’t start?

Discussion in ‘ Skid Steers ‘ started by bobcat s650, Jan 20, 2017 . Try disconnecting the battery for 5-10 min and hook it back up and try again. maybe resetting the ecu will get you up and running. id give the dealer a call too, may be a software update to install.

What kind of hydraulic fluid does Bobcat use?

Bobcat® hydraulic/hydrostatic fluid is a custom blend of fine base oils and additives designed to meet the high-performance requirements of Bobcat equipment. This fluid extends your equipment’s life and improves reliability in tough working conditions.

What kind of oil does a bobcat 753 use?

The service manual for the 753 says 10/30 oil. The CAT dealer sent me some literature in the mail. I noticed they wanted $110 a 5 gallon bucket for their hydraulic oil. For that price that oil better cure cancer. The service manual for the 753 says 10/30 oil. Click to expand…

How often do you change hydraulic oil on a bobcat?

The replacement motor was turbo charged bumping the HP from 85HP to 125HP. Both machines have over 10,000 hours on them and run great except for the sun strand hydrostatic pumps are getting weak. each time I change hydraulic oil (still 15/40 Delo) they run strong for about 6 months.

Is the hydraulic oil good on a bobcat?

Just bought a 2002 773G bobcat, hydraulic oil is low so I called dealer. A 2.5 gallon jug is $40 , it just seemed pretty high . Is their hydraulic oil that good or can I buy another brand that is as good or better for a better price. I don’t want to cheap out , then again I don’t want to throw money away. I seek knowledge!

How does the bobcat hydraulic fluid sensing system work?

Hydraulic fluid temperature BOSS Bobcat Operation Sensing System Monitor Service Codes

Can a bobcat mechanic replace the lift arms?

Your biggest issue may be trying to identify which actuator is the one needing replacement (which one is bucket tilt & which is lift arms). A repair manual would probably handle this, or your Bobcat mechanic should be able to help with this. I would expect them to help even though they are not doing the work.

Where is the actuator on a bobcat lift?

In Midtowns post he says that he replaced his himself. I personally did not, but was present during the first one (had to have the machine back ASAP), and the Regional Bobcat Repair Rep showed me on a removed valve body. The actuator is on the valve body itself. It sits at the end of the spool valve (one actuator for each spool/valve).

Is there a problem with my Bobcat snow plow?

BOBCAT ACS (lift tilt) Problem | The largest community for snow plowing and ice management professionals. Find discussions on weather, plowing equipment and tips for growing your business. We are having a problem with the bobcat s300 that we have.

Do you have to remove centering spring on creeping Bobcat?

Caution; before you make any repairs or adjustments to the drive centering device on a Bobcat, the first thing you must do is get the machine off the ground on 4 stands. Don’t trust just tilting the bucket forward and lifting front wheels, it could drift down. It must be on stands or sturdy blocks. First, you have to remove the centering spring.

Is there hydraulic problem on bobcat 773 wheel loader?

Discussion in ‘ Wheel Loaders ‘ started by marshy, Nov 16, 2016 . Ok as said in the title we have a hydraulic problem on our bobcat 773. The bobcat runs fine and drives fine but the tilt and raise will not work. Its like it is not disengaging.

What is the valve on a bobcat 773 called?

On the BICS its called the valve. The valve the seat bar and system activated lights on the BICS are not lit up either. As for the seat switch its never been connected and was running fine before hand. When i was mucking around with the valve solenoid i unplugged it and started the machine up and it flashed only once but every 2 second intervals.

Is there a hydraulic problem on my Bobcat 773?