Why is my autocrane 3203 not working properly?
Why is my autocrane 3203 not working properly?
Test your “two block” switch. This is the switch that prevents damage to the cable when the block runs up against the pulley. I have a 8005H and have had problems with the micro switch and grounds in the past. Donnie : This switch and the “overload protection” switch will stop the same functions on most Auto Cranes.
What’s the overload protection switch on auto cranes?
Donnie : This switch and the “overload protection” switch will stop the same functions on most Auto Cranes. Boom down, extend out and hoist up are tied together through the ground. Donnie : I have installed a jumper wire on the ground lug of one of these solenoids to get it moving when I am in a bind.
Where are the ground wires on my Crane?
Donnie : Trace out the ground wires on the solenoids. My crane has two leads on each solenoid coil. On one set of coils, three of the terminals are tied together and connected to a ground stud. I placed a jumper on the grounds for the other three coils (boom down, hoist up, extend out) and connected it to the same ground stud.
How are the solenoids on a crane connected?
Trace out the ground wires on the solenoids. My crane has two leads on each solenoid coil. On one set of coils, three of the terminals are tied together and connected to a ground stud. I placed a jumper on the grounds for the other three coils (boom down, hoist up, extend out) and connected it to the same ground stud.
How does the 3203 PR / PRX auto crane work?
The 3203 PR/PRX cranes are attached to your truck electrical system through the Main Power Switch provided. The 3203 PR/PRX is another highly efficient Auto Crane product. The use of a maintenance-free battery is not recommended on any Auto Crane product.
Test your “two block” switch. This is the switch that prevents damage to the cable when the block runs up against the pulley. I have a 8005H and have had problems with the micro switch and grounds in the past. Donnie : This switch and the “overload protection” switch will stop the same functions on most Auto Cranes.
Where is the maximum turning radius on a 3203p Crane?
3203P/PR/PRX Series cranes are on the General Dimension Drawing. Maximum turning radius is shown at the outside edge of the guard (PR/PRX models) and the outside point of the hoist actuator (P model). Remember, the crane adds weight to the vehicle.
What kind of battery does an auto crane use?
The 3203 PR/PRX is another highly efficient Auto Crane product. The use of a maintenance-free battery is not recommended on any Auto Crane product. The recommended alternator and battery that will give the longest life with the most useful duty cycle is a 75-amp alternator with a 500 cold cranking amp battery.
The 3203 PR/PRX cranes are attached to your truck electrical system through the Main Power Switch provided. The 3203 PR/PRX is another highly efficient Auto Crane product. The use of a maintenance-free battery is not recommended on any Auto Crane product.
What kind of crane system does auto crane use?
Auto Crane is an American brand and is still proudly made in the USA. Our patented NexStar™ crane management system is another industry first delivering full power and total proportional control in precision load handling with remote-controlled ease.
Is the Nexstar 3 remote an auto Crane?
The Nexstar 3 remote is incredible easy to handle, easy to maneuver, and have any LED screen on the remote with all the pertinent information you should have when you’re running the crane is incredible. When it comes time to purchase my next service truck it’s absolutely going to be an Auto Crane.
Auto Crane is an American brand and is still proudly made in the USA. Our patented NexStar™ crane management system is another industry first delivering full power and total proportional control in precision load handling with remote-controlled ease.
