What is the alarm code for a Thermo King truck?

Thermo King Alarm Codes – North America. This is a listing of all current truck, trailer, CR, DAS and DSR alarm codes. On multi-temp units, the zone will be identified. Please record all alarms that occur to assist technician in resolving issue. Alarm codes with parenthesis (XX) may exist with alarm code 84 and may clear automatically.

Why does my Thermo King Battery not cycle?

Answer: The most common cause for a unit not to cycle has to do with charging. Check the amp meter in your gauge menu if it is above 5 amps the unit will not shut off. If this is true your battery may be starting to fail.

What happens if you jump start a Thermo King?

Jump the starter and observe the battery voltage. If the starter fails to engage and the voltage falls to 1V or 0V, then you have a bad battery. Replace the battery. Warning: Any attempt to jump start the battery may cause it to explode. Check for a defective high-pressure cutout (HPCO) switch.

Where is the HPCO switch on a Thermo King?

Check for a defective high-pressure cutout (HPCO) switch. The HPCO is located on the top of the compressor. Disconnect the harness and bypass the HPCO switch. If the unit starts, then the HPCO switch is defective. Check the wiring harness on the 8D circuit. If the unit still won’t start, then verify voltage to the HPCO switch.

When to report high discharge pressure on Thermo King truck?

09* High Evaporator Temperature If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. 10* High Discharge Pressure (or Temperature) If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day.

Where can I get help troubleshooting my Thermo King?

If you need help further troubleshooting your Thermo King unit, visit the Mobile Reefer Repair in Sacramento,CA. Information for this article was sourced from Transport Refrigeration website.

Which is the most popular Thermo King trailer?

Thermo King Trailer Units – Most Popular. # 1 SB-III SR. # 2 SB- 210/210+. # 3 SB-310/310+. #4 SB 400. # 5 Spectrum.

What should I do with my Thermo King?

There is nothing complicated about operating and maintaining your Thermo King unit, but a few minutes studying this manual will be time well spent. Performing pre-trip checks and enroute inspections on a regular basis will minimize on-the-road operating problems.

Are there any warranties in the Thermo King Manual?

Thermo King Corporation makes no representations or warranties, express or implied, with respect to the information, recommendations and descriptions contained in this manual and such information, recommendations and descriptions should not be regarded as all-inclusive or covering all contingencies.

Can a Thermo King Battery be improper installed?

WARNING: Improperly installed battery could result in a fire or explosion. A Thermo King approved battery must be installed and properly secured to the battery tray. WARNING: Improperly installed battery cables could result in fire or explosion.

Are there any genuine parts for the Thermo King?

Only genuine Thermo King parts and accessories are engineered to the exacting specifications of your unit and built to last longer and perform better than the competition. Choose from the X430P compressors with Shaft Seal Technology or remanufactured X430 compressors.

Who is the largest Thermo King customer in Canada?

Long-time Thermo King customer Martin Brower Brampton Canada is all about trying innovative products that have the potential to increase fleet efficiencies while supporting the company’s green initiatives.

How can I tell if my Thermo King Battery is bad?

Use a voltmeter and verify that the battery voltage is correct (12V). Jump the starter and observe the battery voltage. If the starter fails to engage and the voltage falls to 1V or 0V, then you have a bad battery.

What is the alarm code for a truck?

This is a listing of all current truck, trailer, CR, DAS and DSR alarm codes. On multi-temp units, the zone will be identified. Please record all alarms that occur to assist technician in resolving issue. Alarm codes with parenthesis (XX) may exist with alarm code 84 and may clear automatically. Operator Action: No action required.

What does code 84 on Thermo King mean?

ALARMS MARKED WITH AN ASTERISK (*) MAY EXIST WITH ALARM CODE 84. THESE ALARMS MAY CLEAR AUTOMATICALLY. No action required. No action required. Manually monitor load temperature. Report this alarm at the end of the day. Manually monitor load temperature. Report this alarm at the end of the day. Manually monitor load temperature.

When to report thermo Akira Refrigeracion alarm code?

The unit (or zone) is no longer able to operate and has been shut down. Repair immediately. Manually monitor load temperature. Report this alarm at the end of the day. Report this alarm at the end of the day. If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day.

What is the alarm code for a Thermo King truck?