How tall is a 310g John Deere backhoe?

Backhoe 310G With Standard With Extendable Dipperstick* Backhoe* Retracted Extended ALoading height, truck loading position …………………………10 ft. 11 in. (3.33 m) 11 ft. 1 in. (3.38 m) 13 ft. 11 in. (4.24 m)

How much John Deere fuel stabilizer should I use?

1 ounce treats 2 gallons. For use at every fill up, use 2.5 ounce in 5 gallons. For best results, treat fuel promptly when purchased. For extended storage (up to two years) uses double the recommended dosage.

What kind of engine does a JD 310g have?

This engine produced 79.8 PS (58.7 kW; 78.7 HP) at 2,000 rpm of output power. The JD 310G is equipped with hydrostatic power steering, hydraulic wet disc brakes, ROPS or cab with heat and A/C (optional) and 136.3 liters (36 US gal.; 30 Imp. gal) fuel tank.

When was the John Deere backhoe loader made?

The John Deere 310G is a 2WD or 4WD backhoe loader tractor manufactured by John Deere from 2001 to 2007.

What kind of engine does a John Deere backhoe have?

The John Deere 310J is a 2WD or 4WD backhoe loader tractor manufactured by John Deere from 2007 to 2011. The John Deere 310J is equipped with a 4.5 L (275.0 cu·in) four-cylinder diesel engine and a full powershift transmission with 4 forward and 2 reverse gears.

What is the Technical Manual for a John Deere backhoe loader?

TM10131 – John Deere 310SJ Backhoe Loader (S.N. -159759) Technical Manual (Operation & Test).pdf Complete technical manual with Electrical Wiring Diagrams for John Deere 310SJ Backhoe Loader (S.N. -159759), with all the shop information to maintain, diagnostic, repair, service like professional mechanics.

How big is the fuel tank on a John Deere backhoe?

The JD 310J is equipped with hydrostatic power steering, hydraulic wet disc brakes, ROPS or Cab, and 155.2 liters (41 US gal.; 34.1 Imp. gal) fuel tank.

Who is the manufacturer of the John Deere 310 backhoe?

MODEL: 310 Loader Backhoe THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT’S SUCCESSORS. JOHN DEERE AND IT’S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.

What does ECU 000100 mean on a John Deere?

ECU 000100.01 – Engine oil pressure low – Check engine oil level. If the code returns, arrange for repair immediately through a John Deere dealer. ECU 000100.03 – Engine system – The problem with the voltage signal of the oil pressure in the engine. Arrange repair as soon as possible through a John Deere dealer. ECU 000100.04 ECU 000100.18

What to do if you have a John Deere fault?

ECU 000110.16 Check coolant level. Inspect and clean the radiator. If the code returns, arrange for repair as soon as possible through a John Deere dealer. ECU 000110.17 Low engine coolant temperature. To warm up the engine. If the problem persists, arrange for repair as soon as possible through a John Deere dealer.

What is the trouble code on a John Deere?

Diagnostic trouble codes of the engine control unit (ECU) Diagnostic Trouble Code – Display – Decision ECU 000097.03 – Engine system – The problem with the signal Water in the fuel. Arrange repair as soon as possible through a John Deere dealer. ECU 000097.04 ECU 000097.16 – Engine water trap full – Remove water from water trap.

What does Diagnostic Code E mean on John Deere transmission controller?

If the third digit of the diagnostic trouble code number is (A or E), it indicates a problem with B8 Rear (LH) Pump Pressure Control Pilot (PCP). If the third digit of the diagnostic trouble code number is (C or D), it indicates a problem with B9 Front (RH) Pump Pressure Control Pilot (PCP).

What does ECU 000097.03 mean on John Deere?

ECU 000097.03 – Engine system – The problem with the signal Water in the fuel. Arrange repair as soon as possible through a John Deere dealer. ECU 000097.04 ECU 000097.16 – Engine water trap full – Remove water from water trap. ECU 000100.01 – Engine oil pressure low – Check engine oil level.

How tall is a 310g John Deere backhoe?