What does the error code F02 mean on Hotpoint?

What does the error code F02 mean on Hotpoint?

Please select an error code to reveal the fault and a how to fix it yourself. Created with sketchtool. F02 Issue: Washing Machines is not operating – some or all functions are not selectable. Advice: We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes.

What happens if you hydrolock your car at idle?

If you’re driving your car when a water hydrolock occurs, the extent of the damage usually depends on your engine speed. If your engine is at low RPMs, such as an idle, when water gets into your engine cylinders, you may escape with no damage at all.

What does it mean to hydrolock Your Motor?

Regardless of the cause, the symptoms remain the same. Hydrolocking can happen much more easily on diesels. The engines are higher compression because the combustion chambers must be lower volume. That means a smaller amount of engine water is needed to cause the effects.

What does fault code F03 mean on Hisense washing machine?

Check your water inlet and ensure it is running as it should. Check the water pressure to ensure it is pushing water efficiently. Fault code F03 pops up on your washer display screen if there is a problem with your washer’s drain hose. It also comes up when there is a problem with your pump.

What is the function of an ANSI F04 office lock?

Function: ANSI # F04 A Office Lock Latch operated by: Rotating inside lever, Rotating outside leveronly when locking toggle is in unlocked position, Turning key in outside cylinder, The latchbolt is deadlocked with an auxiliary deadlatch Outside Lever Deadbolt operated by: N/A Outside Lever Locked by: Placing locking toggle in locked position

What is the F81 code for a lock?

F81 OFFICE LOCK: Turn button locking. Turning button on inside locks outside knob/lever until unlocked by key or by rotating the inside knob/lever. Inside knob/lever always free. Deadlocking latch bolt. F82 ENTRY LOCK: Push button locking. Button on inside locks outside knob/lever until unlocked by key or by rotating the inside knob/lever.

What is the code for the F83 exit lock?

F83 EXIT LOCK: Deadlocking latch bolt by levers except when outside lever is locked by turn button inside. Turn button must be manually unlocked to operate outside lever. Inside lever always free. EXIT LOCK/CONNECTING ROOM: Deadlocking latch bolt by inside knob except when locked by key. Non- removable plate outside (3/8” projection).

What is the F109 code for a door lock?

F109 ENTRY/OFFICE LOCK: Turn/Push button locking. Pushing and turning button on inside locks outside knob/lever requiring use of a key until button is manually unlocked. Push button locking. Pushing button locks the outside knob/lever until unlocked by key or by turning the inside knob/lever. Inside knob/lever always free.