What are the error codes on a Bobcat loader?

Error codes of mini Bobcat loaders will help you identify a faulty actuator and repair the failed mechanism of both the internal combustion engine and the hydraulic system more quickly Deciphering the error codes Bobcat

What are the error codes for mini loaders?

Error codes of mini loaders Bobcat will help you identify the faulty actuator and quickly repair the failed mechanism of both internal combustion engine and hydraulic system Signal PWM Controller front additional. Hydraulics at the upper limit of the range PWM Controller front additional. Hydraulics at the lower limit of the range

What is Def level on compact track loader?

The updates include a DEF level indicator to inform operators how much DEF is in the loader’s tank. Additionally, an SCR error icon will illuminate when the DEF tank is at 25% capacity. Audible alerts will also remind operators when DEF is getting low.

What kind of emissions do Bobcat 700 frame loaders have?

New Bobcat 700- and 800-frame-size compact loaders combine the following technologies to meet Tier 4 emission standards: Selective catalyst reduction is a common aftertreatment system that is required to meet to the EPA emissions standards for 75-plus-hp machines.

How is the solenoid closed on a bobcat?

16-06 The holding solenoid of blocking of thrust is closed on weight 16-07 Breaking the chain retaining solenoid blocking traction 17-05 Solenoid hydraulic shut-off valve shorted to battery 17-06 Solenoid hydraulic shut-off valve shorted to ground

What is the PWM controller code for a bobcat?

12-23 PWM controller front ext. non-neutral hydraulics 13-05 Fuel holding solenoid retainer shorted to battery 13-06 Retention fuel cut-off solenoid shorted to ground 14-02 Fuel Cut-Off Solenoid Solenoid Incorrectly Switched On

When to shut down a bobcat for low oil pressure?

03-22 The battery voltage is below the maximum allowable 04-09 Low engine oil pressure 04-14 Extremely low engine oil pressure 04-15 Engine oil pressure at the level of emergency engine shutdown

What is the error code on the fuel solenoid?

14-02 error code on Bobcat 190. Fuel solenoid shutoff is on 14-02 error code on Bobcat 190. Fuel solenoid shutoff is “on” the manual says. Starts and runs for a minute then shuts back down. Ideas? Drained the fuel line, made sure all electrical connections wer … read more

Why does my Bobcat fuel shut off solenoid?

Discussion in ‘ Skid Steers ‘ started by catnip2377, May 3, 2010 . I am having a bit of a problem with my S130. It would continue to start up and shut down a few second later. After letting it sit for a while it would run for another 15-20 mins and then throws the code and shuts down.

Where is the control lock sensor on a bobcat T190?

There is a control lock sensor in the left console which deactivates the hydraulic control levers (joysticks) and the traction drive system when the control console is raised. The console must be in the locked down position for the hydraulic control levers (joysticks) and traction system to operate.

Is there a Bobcat skid steer that will not start?

We have Bobcat S185 Skid steer that wont start. It has low hours and has been well maintained. It turns over great. It has never not started all the … read more I have an 873 Bobcat. It has been setting 2 years. When I went to start it, it turns over but will not start. No fuel is being pumped from injector lines … read more

What are the warning signs on a bobcat?

HP – Hydraulic Oil Pressure -1 – Shutdown (Engine can be restarted for 30 second periods to move loader) -2 – Warning The versatile Bobcat quickly turns into a multijob machine with a tight-fit attachment hook-up …etc from bucket to grapple to pallet fork to backhoe, and a variety of other attachments.

When is the handle lock closed on a bobcat?

32-62 Handle lock closed on battery 32-63 The pedal lock circuit is shorted to ground 32-64 The pedal lock circuit is shorted to battery 32-66 Battery voltage out of range 32-68 Boom Lift Information Error 32-70 The chain of the right-hand grip is closed to ground 32-71 The chain of the right-hand grip is closed to the battery

Why is my Bobcat 753 Traction Lock not working?

That one should only have voltage on it for no more than 5 seconds or it will fry the coil. It’s possible this secondary circuit is bad in the coil and that’s what the BICS is sensing. It’s a common problem with these types of solenoid coils.

Where is the Traction Lock on a bobcat S250?

Not sure about a 753, but on my S250 there is a fuse and relay box that is inside the cab just below and in front of the seat. It contains a 30 amp fuse and a relay for the traction lock. If you can find a similar box on yours, I would start there.

Why is my Bobcat stuck on the barn floor?

Traction Lock hold open circuit. After going into the more information section it says this: I use my bobcat for odd jobs around the property and right now it is stuck on my barn floor and I need to move it as it is blocking my exit. I used it two days ago, parked up and no problems but now it is being a stubborn mule

What is traction lock solenoid error on bobcat S205?

Traction lock pull solenoid circuit ERROR OFF (Should be ON). Loader can be moved forward & backward. Loader cannot be moved forward and backward. Loader cannot be moved forward and backward.

Which is the most popular Bobcat truck model?

Bobcat fault codes list (error codes) for most popular model as Bobcat 873, Bobcat s130, Bobcat e85

What is the hydraulic pressure on a bobcat?

04-22 The engine oil pressure is below the maximum allowable 05-09 Low make-up pressure in hydraulic system 05-14 Extremely low make-up pressure in the hydraulic system 05-15 Feed pressure in hydraulic system at the level of emergency engine shutdown 05-21 Recharge pressure in hydraulic system is higher than maximum permissible

What is the problem with the bobcat S300?

We are having a problem with the bobcat s300 that we have. You start it up and seconds after that the tilt/lift light comes one. ACS error. The reference guide just says acs error tilt/lift. We noticed it was a bit damp under the cab so we took the cab back and left it inside all weekend with a fan on it in a heated shop.

Traction lock pull solenoid circuit ERROR OFF (Should be ON). Loader can be moved forward & backward. Loader cannot be moved forward and backward. Loader cannot be moved forward and backward.

What’s the code for a bobcat lift tilt?

I was just working on trying to figure ours out. The code it is posting is 32-50 (bad ground to the tilt actuator). I just looked over all the wires in the harness going from the joystick to the actuator for loose wires or wires with rubbed open spots, but couldn’t find anything.

What are the error codes for a Kubota Tractor?

Battery low on charge. Blown fuse. Electrical problem. Wrong engine oil viscosity. Engine hand throttle lever not pushed forward. Cold start system not being used, or malfunctioning. Stale fuel / improper fuel / fuel level. Plugged fuel filter. Dirty or faulty fuel injectors. Failed fuel solenoid.

What does 03-09 mean on a bobcat battery?

The error code of 03-09 is one of the most common codes that you will encounter. It indicates “Low battery voltage”. When your Bobcat equipment is using a rechargeable battery, make sure there is still enough power to run the machine. If the power is low, recharge the battery as soon as possible.

What does 01-17 mean on a bobcat?

It indicates “Low battery voltage”. When your Bobcat equipment is using a rechargeable battery, make sure there is still enough power to run the machine. If the power is low, recharge the battery as soon as possible. 01-17 is the error code to indicate “air filter clogged”.

What to do if your bobcat ACS is not working?

If they look okay-put some dielectric grease on the plug and put it back together. The harness that connects all of that together is the ACS harness. You could have a broken wire there-look for rubs. You could have a bad sensor (handle or pedal), actuator, or even the controller, or a combination.

What causes Bobcat interlock control system ( BICS ) to flash?

bobcat interlock control system (bics) Troubleshooting The following list shows the effects which can happen to the loader, and the probable causes when the BICS System lights are off or flashing and associated service code .

Where do I find the fault code on my Bobcat?

First select your vehicle and then find the fault code in that page. Although we try our best to provide our visitors with the most accurate information that we can find about your skid steer, we cannot be held responsible for any errors. Bobcat is equipped with a universal skid steer quick hitch.

What does service code mean on Bobcat skid steer?

SERVICE CODES Means System Error (See Your Bobcat Dealer For Service) LOADER Button is pressed. LOADER Button is pressed. Seat Bar is down. Seat Bar is up. Lift and tilt functions will not operate. Seat Bar sensor circuit shorted to battery voltage*. Seat Bar is down. Seat Bar is up. Lift and tilt functions will not operate.

03-22 The battery voltage is below the maximum allowable 04-09 Low engine oil pressure 04-14 Extremely low engine oil pressure 04-15 Engine oil pressure at the level of emergency engine shutdown

Which is Bobcat interlock control system does t590 have?

T590 Compact Track Loader EQUIPPED WITH BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) S/N ALJU11001 – ALJU16824 1 OPERATOR SAFETY WARNINGS NA1721 WRONG Always use the seat bar and fasten seat belt snugly. Always keep feet on the foot pedals or footrests when operating loader. WARNING Operator must have instructions before operating the machine.

How to operate a bobcat compact track loader?

Operation & Maintenance Manual T590 Compact Track Loader 6990692enUS (09-15) (C) Printed in U.S.A. © Bobcat Company 2015 NA T4-B Operation & Maintenance Manual T590 Compact Track Loader EQUIPPED WITH BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) S/N ALJU11001 – ALJU16824 1 OPERATOR SAFETY WARNINGS NA1721 WRONG Always use the seat bar and fasten

What is the t590 compact track loader maintenance manual?

PHONE: 4 T590 Operation & Maintenance Manual 5 T590 Operation & Maintenance Manual FOREWORD This Operation & Maintenance Manual was written to give the owner / operator instructions on the safe operation and maintenance of the Bobcat loader. READ AND UNDERSTAND THIS OPERATION & MAINTENANCE

What should the oil temperature be in a bobcat?

07-10 High hydraulic oil temperature 07-11 Extremely high oil temperature in the hydraulic system 07-15 Oil temperature in the hydraulic system at the level of emergency engine shutdown 07-21 Oil temperature in the hydraulic system is above the maximum permissible 07-22 Oil temperature in the hydraulic system is below the maximum allowable

What’s the low hydro pressure code on a bobcat?

Discussion in ‘ Skid Steers ‘ started by jljr42, Jan 24, 2010 . 2005 bobcat t190 705 hours, low hydrostatic pressure code 05-09 and extremely low code 05-14, 05-15 followed by engine shut down. only does it at idle which is 1150 rpm. quits doing it at 1300 rpm.

Is the bobcat T630 a skid steer loader?

Bobcat T630 Skid-Steer Loader Specifications Performance ROLLER SUSPENSION UNDERCARRIAGE (OPTIONAL) SOLID-MOUNTED UNDERCARRIAGE

What do you need to know about Bobcat error codes?

Where do I find the faullt code for Bobcat?

32-62 Chain lock handle ACS closed on battery 32-63 Chain lock pedals ACS is closed to ground 32-64 Chain lock pedals ACS closed on battery 32-70 Chain right arm movements ACS shorted to ground 32-74 X-axis joystick left ACS is out of range 34-04 panel with push-button starting the controller does not communicate with Bobcat

What do the error codes on bobcat tractors mean?

Even though Bobcat is a reliable brand for farming and constructing equipment, errors do happen sometimes, and these are the most common ones that you need to know: Error codes indicating that there is something wrong with the equipment or machine you are using. The error code of 03-09 is one of the most common codes that you will encounter.

What is the complete model and serial number of your bobcat?

Bobcat e50 JA: What is the complete model and serial number of your machine? Customer: ran out of fuel and can get it started JA: Are … read more I have a 2015 bobcat t590, after warmup (about 15 minutes of work) the engine stalls, and then I get code e0005703.

What’s the fuel rail code on a 2015 Bobcat?

I have a 2015 bobcat t590, after warmup (about 15 minutes of work) the engine stalls, and then I get code e0005703. In my manual it show that as a … read more

What is the service manual for a Bobcat skid steer loader?

PDF Service Manual provides helpful material needed to properly service, repair and troubleshoots for the Bobcat S770 Skid-Steer Loader.

When did Bobcat skid steer loader S770 come out?

Note: this product covers several PDF files for Bobcat Skid Steer Loader S770 model of 2011, 2014, 2016 years.

What kind of lift does a bobcat T770 have?

With 11 ft. of vertical lift, the Bobcat® T770 compact track loader is primed for loading trucks, grinders and hoppers as well as many other jobs. The vertical lift path allows you to easily place cargo and tackle demanding tasks. The T770 is a Tier 4 model.

Where is the serial number on a bobcat?

The engine serial number (Item 1) [Figure 3]is located on the side of the engine above the oil filter. DELIVERY REPORT Figure 4 The delivery report [Figure 4]contains a list of items that must be explained or shown to the owner or operator by the dealer when the Bobcat loader is delivered.

What are the error codes on a Bobcat loader?