Most popular

Can you turn off cruise control on a suburban?

Can you turn off cruise control on a suburban?

Never had a cruise control issue in any Suburban I’ve owned. Thanks. The cruise control does turn off correctly when the brakes are touched. But, it still turns off when cruising and not touching the brake. Yes, but if you had a flakey switch that was intermittently ‘turning on’ when you hit a bump, then that would turn off your cruise.

What are the warning lights on a Chevrolet?

The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!

Are there any problems with the cruise control?

We’ve taken two long road trips with 4 kids and all of the luggage in the back. Awesome! During these trips, we’ve noticed problems with the cruise control. There are times when the cruise is engaged and it cuts out. I’ve noticed that this happens if the road gets extremely rough, but it also cuts-out on smooth, flat stretches.

Do you turn off cruise control when you hit a bump?

The cruise control does turn off correctly when the brakes are touched. But, it still turns off when cruising and not touching the brake. Yes, but if you had a flakey switch that was intermittently ‘turning on’ when you hit a bump, then that would turn off your cruise.

When did 2007 suburban cruise control brake switch arrive?

(Just google ‘2007 suburban cruise control brake switch’ for many hits including the video) I decided to take a $10 gamble and ordered the switch on a Thursday and it arrived Saturday morning.

Is there a problem with my Suburban cruise control?

Fix Suburban/Tahoe/Silverado cruise control issue for $10 In Under 5 Minutes. My wifes 2007 Suburban cruise control would light up on the steering wheel but never engage. The CC originally worked fine but slowly developed problems where it would work when first engaged and then stop working once you pressed the brake pedal.

Where is the cruise control switch on a Chevy Silverado?

This switch is located on the brake pedal assembly and allows current to flow to the cruise control module to signal cruise deactivation. To test the switch, use a digital multi-meter set to ohms and read the resistance between terminals “A” and “B.” Resistance should be less than or at 0.3 ohms. Figure 2. A diagram of the stoplamp switch.

What are the symptoms of a bad cruise control brake release?

Another common symptom of a potential problem with the cruise control brake release switch is a cruise control system that stays on even when the brakes are applied. If the cruise control switch fails, it will not be able to deactivate the cruise control system when the brake pedal is depressed.

What are the specs of a 2007 Chevy Tahoe?

Wheels, 4 – 20″ x 8.5″ (50.8 cm x 21.6 cm) polished aluminum (Requires (QSS) P275/55R20 all-season, blackwall tires.) Assist steps, Black, mounted between front and rear wheels (Upgradeable to (BRS) power-retractable assist steps. Headlamps, dual halogen composite with automatic exterior lamp control and flash-to-pass feature

What kind of transmission does a Chevy Tahoe have?

Available on 2WD models.) Transmission, 4-speed automatic, electronically controlled with overdrive and tow/haul mode Transfer case, electronic Autotrac with rotary controls (Requires 4×4 models.) Rear axle, 3.73 ratio (Standard on 4×4 models.

Never had a cruise control issue in any Suburban I’ve owned. Thanks. The cruise control does turn off correctly when the brakes are touched. But, it still turns off when cruising and not touching the brake. Yes, but if you had a flakey switch that was intermittently ‘turning on’ when you hit a bump, then that would turn off your cruise.

We’ve taken two long road trips with 4 kids and all of the luggage in the back. Awesome! During these trips, we’ve noticed problems with the cruise control. There are times when the cruise is engaged and it cuts out. I’ve noticed that this happens if the road gets extremely rough, but it also cuts-out on smooth, flat stretches.

The cruise control does turn off correctly when the brakes are touched. But, it still turns off when cruising and not touching the brake. Yes, but if you had a flakey switch that was intermittently ‘turning on’ when you hit a bump, then that would turn off your cruise.

What is cruise servo number for 1997 Chevy Suburban?

This 1997 Chevrolet Suburban came in with the complaint that the cruise would work sometimes. This repair applies to multiple Chevrolet and GMC trucks and vans that use the cruise servo number 25315088, gasoline only, no diesels. For a list of these vehicles please go to the ACDelco website and you will find a tab labeled “Vehicle List”.

How does the cruise control work on a Chevy Silverado?

To set the cruise at the desired speed, a driver pushes an input on the cruise control switch. This action signals the cruise control module (or powertrain control module) to monitor the speed sensor and actuate the throttle as necessary.

Where is the cruise control fuse on a Chevy Silverado?

A good fuse (on the left) compared to blown fuses (on the right). This switch is located on the brake pedal assembly and allows current to flow to the cruise control module to signal cruise deactivation.

Why is my cruise control not working on my Chevy Silverado?

This 2008 Chevrolet Silverado came in with the complaint that the cruise control would not work. Since I have a Tech 2 scan tool I decided to look for codes first. There was a PCM code P0573 stored for the “Brake Switch Circuit 1 High Voltage”. Simply put the computers think that the brake lights are on and the cruise control is disengaged.

What was the problem with my cruise control?

It was covered under warranty. My 2008 K1500 Suburban lost cruise control about 6 months ago. Thought it would be a dealer issue. Have not been to this site in a while but came here and found a lot of folks have this problem. Common issue is the “stop lamp switch” on the brake pedal. Part number 15861245. $23 from the dealer.

Why does cruise control not work when brake light is blown?

Brake Lights – In some systems, cruise control is disabled when a brake light is blown. Aftermarket lighting, such as LED brake light conversion, might trick the CCM into thinking a brake light is blown, as LED bulbs draw less current than incandescent bulbs.

This 2008 Chevrolet Silverado came in with the complaint that the cruise control would not work. Since I have a Tech 2 scan tool I decided to look for codes first. There was a PCM code P0573 stored for the “Brake Switch Circuit 1 High Voltage”. Simply put the computers think that the brake lights are on and the cruise control is disengaged.

It was covered under warranty. My 2008 K1500 Suburban lost cruise control about 6 months ago. Thought it would be a dealer issue. Have not been to this site in a while but came here and found a lot of folks have this problem. Common issue is the “stop lamp switch” on the brake pedal. Part number 15861245. $23 from the dealer.

When do you switch off the cruise control?

Usually the cruise control will have to be switched off by hand in order to stop the vehicle from continuing to accelerate. The cruise control brake release switch is an important component in maintaining the proper functionality of the cruise control system.

What happens to the cruise control when you step on the brake?

When the brake pedal is stepped on, the cruise control brake release switch is tripped and the cruise control system is then cut off. The switch is designed to disable power to the cruise control system when the brakes are applied to prevent the possibility of attempting to slow the vehicle while the engine is accelerating.

Author Image
Ruth Doyle