What is the code for bank 1 O2 sensor?

What is the code for bank 1 O2 sensor?

All our repairs are backed by our 12-month / 12,000-mile warranty. P0138 is the OBD-II generic code indicating the O2 sensor for bank 1 sensor 2 fails to have a lower voltage output below 1.2 volts for more than 10 seconds indicating a lack of oxygen in the exhaust stream.

What does Bank 1 lean on a V6 mean?

Basically this means that an oxygen sensor in bank 1 has detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. The P0171 is one of the more common trouble codes. This code is triggered by the first downstream (front) O2 sensor.

What is the diagnostic code for O2 sensor circuit high voltage?

P0138 is a diagnostic trouble code (DTC) for “O2 Sensor Circuit High Voltage (Bank 1, Sensor 2)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

What does p0171 system too lean Bank 1 mean?

P0171 System Too Lean Bank 1 Technical Description. System Too Lean (Bank 1) What does that mean? This diagnostic trouble code (DTC) is a generic powertrain code. It is considered generic because it applies to all makes and models of vehicles (1996-newer), although specific repair steps may be slightly different depending on the model.

How to check O2 oxygen sensor high voltage bank 1, sensor 2?

How to Check. In order to check the O2 Oxygen Sensor Circuit High Voltage Bank 1, Sensor 2, the scanner will show the P0138 code, which indicates the error, and the following should complete the checklist: Check connection to O2 sensor for corrosion as well as wire degradation.

What is the OBD code for bank 1 sensor 2?

P0138 is the OBD-II generic code indicating the O2 sensor for bank 1 sensor 2 fails to have a lower voltage output below 1.2 volts for more than 10 seconds indicating a lack of oxygen in the exhaust stream.

What is the error code for O2 oxygen sensor?

Error Code P0138: O2 Oxygen Sensor Circuit High Voltage Bank 1, Sensor 2. Error code P0138 is described as O2 Oxygen Sensor Circuit High Voltage Bank 1, Sensor 2. This indicates there is a failure to have a low voltage output below 1.2 volts or a time period of more than 10 seconds, which signifies no oxygen in the exhaust.

What makes the O2 sensor signal biased or stuck lean?

These sensors emit a high voltage signal for a fuel-rich mixture with little oxygen and another signal with lower voltage to indicate a lean mixture. As the oxygen levels in the engine’s exhaust shift up and down, the sensor signal fluctuates, with any sensor failing to change enough likely suffering from a malfunction.