Where is the PCM on a Dodge Ram?
Where is the PCM on a Dodge Ram?
When connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and DIODE ISOLATE. to connect, See DIAGRAM NOTE #6: the PCM (Powertrain Control Module) is located on the PASSENGER SIDE firewall, the DIESEL tach wire is a GRAY/BLACK at the ECM (Electronic Control Module) on the lower drivers side of the engine, 60 pin plug, pin 24.
What is the wiring diagram for a Dodge Ram?
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2004-2005 Dodge Ram . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle.
Which is the correct color for a tracer wire?
Color Code Color Color Code Color BR BROWN OR ORANGE DB DARK BLUE TN TAN DG DARK GREEN VT VIOLET GY GRAY WT WHITE LB LIGHT BLUE YL YELLOW LG LIGHT GREEN Tracer Wire Color Code Chart Wiring Code Identification Information CONNECTORS
What are the gauges on a Dodge Ram?
PINK/YELLOW 16 gauge & PINK/YELLOW 14 gauge and the DARK BLUE Accessory #1 to turn on the A/C Compressor.
What was the pin out on a 1995 Dodge Ram?
PCM Pin Out Chart (1994 V8 Dodge Ram 1500, 2500 Pickup). PCM Pin Out Chart (1996 5.2L, 5.9L Dodge Ram Pickup). Here are some very important safety precautions when testing the wires coming out of the 60 pin PCM connector.
Do you need a pin out chart for a Dodge Ram?
If one or any of the wires on your Dodge Ram pickup DO NOT match the color stated in the pin out charts, then you should not use the pin out charts in this article. Why? Because this is the clearest indication that these ARE NOT the connector pin out charts for your particular Ram pickup.
How does the PCM work on a Dodge?
The PCM analyzes sensor readings and engine functions. As soon as a component within the engine or fueling system malfunctions, the PCM issues a code and labels the problem either “trouble” or “pending.”. If the PCM were to cease working properly, your Dodge’s diagnostic system would become untrustworthy.
How to reset PCM and check engine light in Dodge Ram?
The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery. Unlatch and open the cover of the PDC.
