Where are the vacuum hoses on a Ford Ranger?

Vacuum Diagram Definitions Abbreviation Description A/CL Located in the air cleaner A/CL DV Air Cleaner Diverter Valve A/CL BI MET Air Cleaner Bi-Metallic Valve A/CL CWM Air Cleaner Cold Weather Modulator

What causes a vacuum leak in a fuel injection system?

Vacuum leaks are the leading cause of installation issues with your fuel injection system. Check all sources of potential vacuum leaks including components not related to the fuel injection system. There are instances where the vacuum leak is coming from the adapter plate used to attach the throttle body to the manifold.

What kind of vacuum pump does a Ford Fiesta use?

The exceptions are its hybrid electric vehicles, which use an evaporative leak check monitor (ELCM) similar to the Toyota key-off vacuum pump system, and 2011-03 Ford Fiestas, which use a natural vacuum leak detection (NVLD) system similar to the one used by Kia and BMW.

What does the engine off natural vacuum system do?

The system is called an engine off natural vacuum (EONV), and primarily uses the CVS and FTPS after the vehicle is shut off to check the gas vapor system. The PCM has been updated to include a stay-alive microprocessor that’s designed to control the CVS and monitor the FTPS key-on, engine-off (KOEO) without energizing the entire PCM.

Where can I buy a new central vacuum hose?

Buy a new central vacuum hose, repair your hose, buy accessories or install a retractable hose option. If you have questions, call one of our specialists at 1-800-221-8227 and they will be happy to help you with your purchase.

How big is a central vacuum extension hose?

The 7-foot Stretch Hose goes up to 24 feet and is a perfect for quick clean-ups without getting the long central vacuum hose. 12ft Extension Hose – Double your Cleaning Area. Use the 12-ft extension hose to almost double your cleaning area. The Padded Zippered 30 ft Central Vacuum Hose Sock Cover protects your hose and your home.

Which is the best central vacuum hose for beam?

The 30 ft direct connect electric vacuum hose for Beam Central Vacuums is the best replacement for Beam Total Control, RugMaster, Serenity, Classic, Butler, & other hoses. The perfect central vacuum hose for homes with minimal carpet.

How big is a central vacuum hose sock?

Use the 12-ft extension hose to almost double your cleaning area. The Padded Zippered 30 ft Central Vacuum Hose Sock Cover protects your hose and your home. Glides over all surfaces and protects baseboards and furniture. Original 30 ft Form-Fitting Hose Sock protects your hose and your home.

Where is the vacuum gauge on a Ford?

For a quick and dirty reading unplug the easy to find PCV hose on the valve cover and plug in the vacuum gauge.

What should the vacuum reading be on a Ford engine?

Haynes emissions control manual engine starting vacuum should be 1 to 4 in Hg. To test disable ignition (ground wire from coil), hold throttle wide open, crank engine slowly with starting motor. healthy engine at idle should read steady 15 to 20 in Hg. healthy engine at 2000 rpm should read steady 19 to 21 in Hg.

What does Thermactor stand for in Ford Ranger?

Thermactor, short for Thermal Reactor. CA vehicles are installed with it as standard. Air Injection Reaction is what it stands for.

When to replace PCV valve on Ford Escort?

You’ll hear a rattle. If you don’t, it is time to replace the valve. Even if the valve rattles, if your engine is experiencing one or more of the bad PCV valve symptoms described above, it’s a good idea to replace the valve. Some vehicles—including some old Ford Escort models—come equipped with a small, hollow, plastic block with no moving parts.

What should I do if my PCV valve is leaking?

If you find the hoses filled with slime, clean them with PCV solvent or lacquer thinner and replace the valve. Or, simply replace those components along with the PCV valve. Many engine models use a simple, inexpensive valve, and many car owners just replace it every service interval.

When is it time to replace the PCV valve?

Most PCV valves contain a spring-loaded device. Once you remove the valve, shake it with your hand. You’ll hear a rattle. If you don’t, it is time to replace the valve. Even if the valve rattles, if your engine is experiencing one or more of the bad PCV valve symptoms described above, it’s a good idea to replace the valve.

How do you replace a vacuum line in a 1994 Ford?

The green marks in the photo apply to 1994-1995 cars: I started by replacing the short section of 5/8″ hose coming off the drivers’ side valve cover. Simply twist and remove the short section of hose, lay it beside your 1ft length of 5/8″ hose, and cut so the length is approximately the same.

Where does the vacuum line go in a car?

The vacuum line is usually connected to the upper intake near the back or either side of the intake. Another alternative is going to the dealerships parts department and they will have a diagram of the vacuum line and we’re it goes to the engine.

Do you need a fuel line for a vacuum line?

You must use emissions hose (or fuel line hose) on those hoses. Regular vacuum hoses just aren’t strong enough to work. The auto parts store may try to sell you fuel injection hose, that type of hose is rated to handle a lot higher PSI (pressure) and is not necessary.

Is there a cruise control on a 1996 Ford Ranger?

Brief Explanation: This is a guide on how to install, from scratch, the Cruise Control on a 1996 Ranger, XLT V6 3.0 liter engine. My truck came with no cruise control from factory, but the system was totally prewired.

How to troubleshoot a Ford Cruise Control System?

Check the cruise control module and combination stalk. These units rarely, if ever, fail. However, if the unit is bad, you’ll want to know. Remove the screws holding the steering wheel column cover in place and pull the cover off the steering column with your fingers.

When did the Ford Ranger pickup truck come out?

People would only have to read Ford Ranger reviews to know the Ford Ranger pickup truck has been a favorite for truck buyers since its introduction in 1982. At this time, Ford released the truck as an early 1983 model. It was introduced in response to an influx of Japanese pickup trucks flooding the American market at the time.

What kind of trailers can a Ford Ranger tow?

Ford Rangers can tow most types of campers, including pop-up trailers, travel trailers, teardrop trailers, airstreams, and small/medium fifth wheels. Below is a table that describes the three different models of Ford Rangers.

What kind of engine does a Ford Ranger have?

The original engine has a maximum of 80 horsepower. This is also similar to the engines found inside some earlier models of the Ford Pinto. The 2.3-liter engine did not last long, as Ford upgraded the original to a 2.8-liter V6 engine with 115-horsepower by the end of the year.

How big is the bed of a Ford Ranger?

During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style. The Ford Ranger SuperCab was created with an extended cab body-style, and the SuperCab boasted a 6-ft bed with a 125-inch wheelbase.

What’s the problem with the Ford Ranger 3.2?

On the 3.2 (and 2.2) Ranger, this valve is actually water-cooled, using the same coolant as the engine itself. The problem is that the cooler can split, leading to a loss of coolant from the radiator.

What kind of engine does the Ford Ranger have?

And the 2021 Ford Ranger features the only gas turbo engine in its class, the class-exclusive advanced 2.3L EcoBoost ®. Pair it with the class-exclusive 10-speed automatic transmission and the Ranger blows other gas-powered pickups in its class out of the water with the best gas torque in its class at 310 lb.-ft.

What’s the EGR valve on a Ford Ranger?

Modern engines use pretty sophisticated methods for keeping their emissions clean, and one of those is the Exhaust-Gas Recirculation (EGR) valve. On the 3.2 (and 2.2) Ranger, this valve is actually water-cooled, using the same coolant as the engine itself.

Do you need a vacuum reservoir for a F-150?

The engine needs a vacuum reservoir supply to run properly. Fits a 95 F-150 XLT 5.0. Idling smoothed out a bit, stock one had a giant rust hole and was held down with a zip tie. Thankfully the new one comes with a new bracket and bolts, no new nuts though, that’s on you.

Do you need a vacuum reservoir for a 95 Bronco?

OEM for my 95 bronco a little pricey but it should last. I got 25 years out of the original. Solved my EGR engine light problem. Even if you tie the vac hoses together you will still get engine light. The engine needs a vacuum reservoir supply to run properly. Fits a 95 F-150 XLT 5.0.

Where can I find vapor canister purge valve replacement?

Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Welcome to NKY DIY. Based in Northern KY, we are all about DIY projects and traveling. If you have a suggestion for a future video please leave us a comment!

Thermactor, short for Thermal Reactor. CA vehicles are installed with it as standard. Air Injection Reaction is what it stands for.

What happens when the PCV valve fails in a car?

But before we get to that, here’s this whole article in a nutshell: What the PCV valve does, what happens when it fails, and how to test it. • Uses the engine vacuum to pull blow-by gases out of the crankcase. • Pushes the gases down the intake manifold and back into the combustion chambers where they are re-burned.

What are the sensors on a Ford Ranger?

– Engine Coolant Temperature (ECT) sensor (4.0L) – Manifold Absolute Pressure (MAP) sensor (2.3L) – Cylinder Head Temperature (CHT) sensor (2.3L) – accepts input from various engine sensors to compute the fuel flow rate necessary to maintain a prescribed air/fuel ratio throughout the entire engine operating range.

Where is the power distribution box located in a Ford Ranger?

Electric Shift, Backup Lamps, Daytime Running Lamps (DRL), Transmission Control Switch, Pulse Vacuum Hub Lock The power distribution box is located in the engine compartment near the battery. Heated Oxygen Sensor, EGR Vacuum Regulator, EVR Solenoid, Camshaft Position Sensor (CMP), Canister Vent Solenoid

Where is the fuse box located on a Ford Ranger?

Battery Saver Relay, Electronic Shift Relay, Interior Lamp Relay, Power Window Relay, Electronic Shift Control Module, Dome/Map Lamp, GEM Electric Shift, Backup Lamps, Daytime Running Lamps (DRL), Transmission Control Switch, Pulse Vacuum Hub Lock The power distribution box is located in the engine compartment near the battery.

Where are the heater control valves located in a car?

Some heater control valves will be located in the engine compartment at or near the passenger side firewall. Others are located behind the dashboard near the passenger footwell.

Why do I need to replace my heater control valve?

During times when the air conditioner is in use, the heater control valve closes, preventing engine coolant from entering the heater core. The result is less heat in the passenger compartment, allowing the air conditioner to work more efficiently. Follow the step-by-step guide below for directions for replacing a faulty heater control valve.

Some heater control valves will be located in the engine compartment at or near the passenger side firewall. Others are located behind the dashboard near the passenger footwell.

How does the radiator cap work on a Ford Ranger?

When the rad cools down, the creates a partial vacumn in the rad which opens the valve in the cap in the opposite direction, allowing coolant to be ‘sucked’ back into the radiator from the overflow tank. So, you can see that the radiator cap]

What kind of radiator does Ford Ranger XLT have?

Hey there. I have a 2002 Ranger xlt 2.3 5speed and in the spring i ended up replacing the thermostat, housing and hoses. The truck has run like a champ.

Where is the radiator hose located on a front wheel drive car?

On a rear-wheel-drive car, it will be at the front of the engine. On a front-wheel-drive car, you will find it on the right (or passenger side) of the car. The second radiator hose is located at the bottom of the engine coming off of the water pump running to the bottom of the radiator. Thanks!

Is the Ford Ranger a convertible or hardtop?

Swap the mounts to opposite sides (Left-Right). The convertible engine mounts and hardtop engine mounts are not the same. The 5.0L Ford Mustang Convertible was actually built on a 4-cylinder Mustang chassis. The 1994-1995 Ford Mustang GT uses the same engine mount.

What kind of adapters does a Ford Ranger use?

The Advance Adapters 2WD mounts (713015A) work with the factory Ford rubber V8 mounts Part NO. E4TZ-6038G or Advance Adapters Part NO. 713017.

Where are the brackets on a Ford Ranger?

Fabricate two new brackets from 1/4-inch plate steel to bolt onto the side of the V8 motor at the motor mount bosses. This isn’t as difficult as it might sound.

How does the vacuum system work on a Ford truck?

I need help understanding how the vacuum system works on my truck. 40+ year old Ford, 4WD, 302 V8, C4 Automatic, Motocraft 2150 carburetor. Is there any rhyme or reason to how it all fits together? What is the purpose for those two vacuum temperature switches? Why the involvement with the transmission?

What was the engine diagram for a 1999 Ford Ranger?

Here is a picture gallery about 1999 ford ranger engine diagram complete with the description of the image please find the image you need.

What kind of wiring does a Ford Ranger have?

Youll find part two in the next page. 1983 1988 ford ranger 28l and 29l engine ignition wiring diagram 124 kb 1983 1989 ford ranger exterior light diagram 88 kb 1983 1989 ford ranger headlight wiring diagram 66 kb 1984 1988 ford ranger bronco ii dome cargo light wiring diagram 87 kb 1990 ford explorer power window wiring diagram 25 kb.

How big is the fuse box on a Ford Ranger?

Ford ranger 2000 fuse box diagram auto genius with 1999 ford ranger engine diagram image size 1025 x 544 px and to view image details please click the image. Activities and vehicle modifications appearing or described at the ranger station and its pages may be potentially dangerous.

Is the owner’s manual on a Ford Ranger correct?

FORD RANGEROwner’s Manual The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.

What is the air conditioning system on a 5 Ranger?

Air conditioning system Anti-lock braking system Avoid smoking, flames or sparks Battery Battery acid Brake fluid – non petroleum based 5 Ranger (), EB3B-19G219-ZAA enall Introduction Brake system Cabin air filter Check fuel cap Child safety door lock or unlock Child seat lower anchor Child seat tether anchor

When did the Ford Ranger get a V6?

The Ford Vulcan V6 is a 3.0L, 60° V6 engine, first introduced for the 1986 model year and originally designed to be the optional engine in the Ford Taurus and Mercury Sable. In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger

Where does the Ford Ranger engine come from?

The Vulcan was a clean-sheet design using the metric system. The engine block is built by Sherwood Metal Products, the intake comes from Ford’s Essex Casting, and the engine is assembled at Ford’s Lima Engine plant in Lima, Ohio. The Vulcan is a straightforward pushrod design, with 2 valves per cylinder. Bore is 3.504 in and stroke is 3.15 in.

How big is the crankshaft on a Ford Ranger?

Ford Ranger 3.0L V-6 Crankshaft Pulley Bolts 107 ft-lbs Flywheel to Crankshaft Bolts 59 ft-lbs Upper Intake Manifold / Throttle Body 19 ft-lbs Exhaust Manifold 19 ft-lbs

What causes a trouble code on a Ford Ranger?

Clearing trouble codes on a Ford Ranger is a simple and easy task that anyone can do. Trouble codes are set off by the truck’s computer when it detects a problem, which can be as simple as a loose gas cap, or as severe as an engine misfire.

What to do when check engine light is no longer on on Ford Ranger?

Loosen the bolt until you can pull up on the negative battery cable and remove it. Wait between 30 seconds and one minute. Reattach the negative battery cable to the terminal and tighten with the adjustable wrench. Start the vehicle to confirm the check engine light is no longer on.

When did the Ford Ranger get a Vulcan engine?

In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger The Vulcan was a clean-sheet design using the metric system.

What does it mean when your Ford Ranger wont accelerate?

If your Ranger won’t accelerate, but the RPM’s do not change, that is an indication that there is an issue with creating power. The issue is going to be something affecting the motor. Here are some common issues that can affect the motor:

What’s the power rating of a Ford Ranger?

In 1991, it was updated with lower-friction pistons, a strengthened block, roller camshaft and other changes that resulted in a power rating of 145 hp and a torque rating of 160 ft·lbs.

What kind of vacuum line do I Need?

I have a 1993 Ford explorer xlt 4×4 with a 4.0 liter that has 64,000 miles. I picked this vehicle up a month ago and it was loping at accellerationb so I checked vaccum lines. I found a vaccume line was missing, with a stub and a screw in the end to replace it.

Where is the heater on a 1993 Ford Ranger?

Access the motor by fully opening the glove box and looking for the motor on top of the heater box in the upper left hand corner of the glove box opening. With the screw attachment, you will see two 8mm head screws (note that a 5/16 socket will also work) in the front of the motor.

Where does the air come from in a Ford Ranger?

If you open the glovebox and lower it down (with the dash installed), you can see a rubbery, transparent blue connector and a white socket, that connects the vacuum tubes from the firewall/heater box to the dash. These allow you to switch where the air/heat comes from.

How big is the repair manual for a Ford Ranger?

1996-1999 Ford Vehicles Workshop Repair Service Manual (2.9GB DVD IMAGE!) 1996-1999 Ford Vehicles Workshop Repair Service Manual (2.9GB DVD IMAGE!) Ford AeroStar Aeromax Cargo Econoline Expedition Explorer F&B Series F-150 F-250 F-350 Super Duty Louisville L-Series Mountaineer Ranger Villager Windstar 1997 Service Repair Workshop Manual Downl

Where is the vac hose in a Ford Ranger?

Does anybody have a vac hose diagram they can take a pic of and post on my thread. I have a 97 ranger xlt with a 2.3. In the front passenger side of truck there is a black ball located under the air intake filter, I believe it’s called a canister.

Is the vacuum line on my Ford Ranger Broken?

One of the hoses is attached to motor and the other one is broken off about 3″ from canister. With the engine running if I hold my finger against the broken vac line it has suction so I’m trying to fix it now that I have my truck up and running again.

Ford Ranger 3.0L V-6 Engine Displacement (Cubic Inches) 183 CID Block Cast Iron 60º V-6 Type Over-head Valve Engine Bore x Stroke 3.50 x 3.14

Is the 3.0L motor problematic in the Ford Ranger?

Its like that for any underpowered engines, Autos just takes whatever little juice it has left. ALL the vehicles peeps around these parts brag on the ford 3.0, even the GM people on the used car lot. Just 1 reason I started looking for a Ranger.

What kind of oil leak does a Ford Ranger have?

Ford 3.0-liter V6s are notorious oil leakers. Knowing where the problems lie and what to look for is crucial for accurate diagnoses and repairs. At this moment, I have in my shop a 1994 3.0-liter Ford Ranger.

Where would I find the diagnostic plug on a 1994 Ford Ranger?

By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. Where would I find the diagnostic plug on a 1994 Ford Ranger… Where would I find the… Submitted: 11 years ago. Category: Ford

How are the codes transmitted on a Ford Ranger?

Codes are transmitted by place value with a pause between the digits; Code 32 would be sent as 3 flashes, a pause and 2 flashes. A slightly longer pause divides codes from each other. Be ready to count and record codes; the only way to repeat a code is to recycle the system.

Can a 4.6L V8 be used as a vacuum line?

Generally, this procedure should apply to all 1994, 1995, 1996, and 1997 T-Birds & Cougars with the 4.6L V8 engine. The process will be similar for 3.8L V6 and 5.0L V8 equipped cars, so refer to your underhood vacuum hose routing label for more details.

Where are the vacuum ports on a Ford 4×4?

Ford has used three types of vacuum-operated automatic locking front hubs: pulse vacuum hublocks (PVH), constant vacuum hublocks (CVH) and integrated wheel ends (IWE). PVHs and CVHs have one vacuum port that pokes out at the top of the steering knuckle, while IWEs have two ports located in the knuckle right above the halfshaft.

How does a transmission vacuum modulator work?

A lot of people take gear shifts in their vehicle for granted. But every time your automatic transmission needs to shift into a different gear, there is a vacuum modulator inside which ensures that the gear shift can be successfully completed. How Does a Transmission Vacuum Modulator Work? How Does a Transmission Vacuum Modulator Work?

Where are the fuse panels on a Ford Ranger?

Here you will find fuse box diagrams of Ford Ranger 1998, 1999, 2000, 2001, 2002 and 2003, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where to get a vacuum diagram for a Ford F150?

U can go pick up a Haynes shop manual at just about any auto parts store, in the back of it it will have wire and vacuum diagrams 2 people found this helpful.

Where can I find a vacuum diagram repair guide?

Once you sign in, follow these instructions to access our Repair Guides. Add your vehicle in Manage My Vehicles. Enter your vehicle details. Click the “View More” button, and then click “Vehicle Repair Guides.” Select the chapter “Vacuum Diagrams Repair Guide”.

Is the oil gauge out on a Ford Ranger?

Also, the oil gauge will flicker like crazy occasionally at idle. The door sensor is out also if that matters. When I bought it, it idled rough, but at the appropriate rpms (650-750 in drive) but it was missing.

Where are the spark wires on a Ford Ranger?

One thing I saw was a snipped small red (apprears to be a ground) wire just left of the fuse box bolted down under a wierd plastic can lookin thing (zero idea what it is). I will post a picture later today. I thought I would start with the basics, clean the MAF, IAC, replace the PCV. change my spark wires as well.

What’s the idle rate on a Ford Ranger?

The truck, when I come to a stop and idle, will drop down to 500-450rpm and if in put into park, even lower and usually die. The idle is extremely rough and feels like it is going to poop out. No difference is noticed with the A/C on or off, as well as the stereo. Also, the oil gauge will flicker like crazy occasionally at idle.

What should I do about my Ranger 4.0L engine?

Tune up items basically. Also, if you get a problem with hesitation, check the wires around the exhaust. One of the oxygen sensor wires may have been damaged by the exhaust. Loose Intake Manifold Bolts – Some 90’s 4.0L’s have a problem with loose intake bolts. Click HERE for more details. Performance Parts:

How big is the engine diagram on a Ford Ranger?

Vacuum Line. – Ranger-Forums – The Ultimate Ford Ranger within Ford 4.0 Sohc Engine Diagram, image size 575 X 512 px Truly, we also have been realized that ford 4.0 sohc engine diagram is being one of the most popular issue right now. So we attempted to obtain some good ford 4.0 sohc engine diagram image for your needs.

What kind of camshaft does a Ranger 4.0 have?

Camshaft# 49-422-8 is a more aggressive cam for 4.0’s with other modifications. It is designed to improve midrange power and torque. Offers a kit to install an Eaton supercharger on the 4.0L Ranger. We found this kit on eBay to mount an Eaton supercharger on a newer SOHC 4.0 Ranger.

When did the 2.0 liter Ranger come out?

The 2.0/2.3 liter versions that were offered in Rangers starting in 1983 used a different head having four evenly spaced round holes of equal size. A 2.0 liter 1bbl carbureted version was offered in Rangers from 1983 – 1985, and in 1987 – 1988 with a 2bbl carburetor in some parts of the US, Canada and Mexico.

What did the new Ford Ranger look like?

Box-like shapes were a thing of the past, as the new car featured sleek and rounded body lines, with individual design elements that distinguish it from larger Ford models. Special addition to the lineup was Ranger Splash, which featured retro-styled step-side bed, chromed wheels and other visual improvements.

Ford Ranger 4-Cylinder Engines Displacement 140 CID Type Dual Over Head Cam Bore x Stroke 3.445 x 3.7010 inches Compression Ratio 9.7:1

When was EFI added to the Ford Ranger?

Electronic Fuel Injection (EFI) was added to the engines in 1985. In 1989 the 2.3 was changed to a DIS (Distributorless Ignition System) ignition utilizing a new 8-plug head ( 2-plugs per cylinder). This head had larger evenly spaced D-shaped intake ports and was used until the end of production of the 2.5 in 2001.

Can a vacuum be used to open an EGR valve?

A vacuum-operated EGR valve is usually only found in older vehicles. It is a straightforward system which utilises a vacuum to switch the EGR valve from closed to open. The vacuum is often regulated by a computer-controlled solenoid.

What kind of transmission does a Ford Ranger use?

The A4LD automatic overdrive transmission is a Ford C3 automatic transmission modified with the addition of overdrive. The first version of this transmission has a single electronic control solenoid located in the valve body that moves a valve allowing transmission fluid to flow into the TCC (torque converter clutch) circuit of the transmission.

What kind of ignition does a Ranger 2.8L have?

Here’s how you can get rid of that terrible TFI Ignition and replace it with a Duraspark Ignition. The 2.8L V6, as found in Rangers and Bronco II’s from 1983 to 1985, are saddled with a rather bizarre fusion of EFI and carburetion in the form of the EEC-IV controlled Motorcraft carburetor and TFI ignition.

How to test the Ford EGR valve EGR vacuum solenoid?

You can use a vacuum gauge if you want, but it isn’t necessary since all we need to ascertain is that engine vacuum is reaching the EGR Valve Vacuum Regulator Solenoid. OK, here’s the test: With the engine off, disconnect the two vacuum hoses that connect to the EGR Valve Vacuum Regulator Solenoid.

What are the symptoms of a Ford EGR fault?

The following are the most common symptoms that a Ford (or Mercury or Lincoln) car or truck will usually experience when there’s a fault in the EGR system: P0401 EGR System Flow Insufficient. P01406 EGR Valve Pintle Position. Rough Idle. Really bad gas mileage.

What are the problems with a 2003 Ford Ranger?

1 Shifting Problems 2003 Ranger Average Cost to Fix: $1,200 Average Mileage: 85,000 mi 2 Loss Of Acceleration 2003 Ranger Average Cost to Fix: $3,500 Average Mileage: 103,000 mi 3 Wheel Bearings Come Loose 2003 Ranger

What are the parts of a Ford Ranger?

Part Universal Air Filter(707) Muffler(603) Exhaust Tip(339) Tachometer(315) Catalytic Converter(312) Speedometer(264) Engine Control Module(246) Boost Gauge(234) Water Temperature Gauge(219) Oil Pressure Gauge(210) See All Brand Autometer(2369) Replacement(1002) Motorcraft(813) Dorman(657) Standard(630) Magnaflow(568) aFe(565) A1 Cardone(463)

Are there aftermarket replacement parts for Ford Ranger?

Aftermarket replacement parts are just as good as OE parts. They’re made in world-class facilities using the finest raw materials, so you can be sure that they’re built to last. If you’d like to save money on your repairs without sacrificing quality, aftermarket replacements will surely work for you.

What are the dimensions of a 2003 Ford Ranger?

Torsion bar on select models (Edge) Outside Rotor Diam (in.) Inside Rotor Diam. (in.) Total Swept Area per Axle (sq. in). Fuel Capacity (gal.) Dimensions and capacities are in inches unless otherwise noted. Maximum Loaded Trailer Weights (lbs.) – Automatic Transmission Maximum Loaded Trailer Weights (lbs.) – Manual Transmission

Do you need to replace transmission on Ford Ranger?

To get it back in shape, you’ll need to replace its faulty or damaged parts. Here at CarParts.com, we have an extensive Ford Ranger parts catalog that caters to all your repair needs, so you can resume your off-road adventures as soon as possible. Ford Ranger transmission problems are common across model years.

What are the parts in a Ford Ranger wiper?

Ford Ranger Wiper Motor Refine by: Part Universal Air Filter(707) Muffler(603) Exhaust Tip(339) Tachometer(315) Catalytic Converter(312) Speedometer(264) Engine Control Module(246) Boost Gauge(234) Water Temperature Gauge(219) Oil Pressure Gauge(210) See All Brand Autometer(2369) Replacement(1002) Motorcraft(813) Dorman(657) Standard(630)

Why does my 2.3L Ford Ranger have one dead cylinder?

In other words: If the engine is misfiring, the engine is simply not firing on all cylinders. Now, since the 2.3L Ford engine is a four cylinder, having just one ‘dead’ cylinder will cause an impact on engine performance and you’re gonna’ definitely feel it as you’re driving down the road or stopped at a traffic signal.

What does it mean when a Ford Ranger has a misfiring cylinder?

You can find this tutorial in Spanish here: Cómo Probar Un Falla En Cilindro (2.3L Ford Ranger y Mustang) (at: autotecnico-online.com ). Whether your specific 2.3L Ford Mustang or Ranger is OBD II equipped or not, a misfiring cylinder simply means that that cylinder is not pulling all of its weight.

How to bleed a Ford Ranger clutch master cylinder?

This feature is not available right now. Please try again later. Procedure to bleed the air out of the hydraulic clutch master cylinder. Use this method if you have a mushy pedal and you’ve tried to bleed the system at the slave cylinder. Very useful if you ran out of fluid and got air in the system Loading…

What are common reasons my Ford Ranger has air conditioning problems?

What are common reasons my Ford Ranger has air conditioning problems? While there are a variety of reasons your Ford Ranger air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor. What will be the outcome of an air conditioning system diagnosis?

Where are the vacuum lines on a Ford?

The 2 lines under the hood stick into holes in the grommet…and on the backside, there are 2 vacuum lines attached that run to the controls on the dash. All you should have to do is stick the line that has become detached back in the hole in the grommet.

How does the a / C work on a Ford Ranger?

Adjustable air flow: The heater core controllers allow you to make incremental adjustments to the speed of the flowing warm or cold air. They also allow you to select which vents the air flows out of for interior cabin comfort. How do you choose Ranger A/C and heat control parts?

How are the controls on a Ford Ranger heater work?

Easy-to-Read: The knobs and face plates use blue to indicate cooling and red to indicate heating. They also use symbols to show intensity, speed, and direction of the airflow. Adjustable air flow: The heater core controllers allow you to make incremental adjustments to the speed of the flowing warm or cold air.

What to do when your Ford Ranger has no heat?

When there is no heat, a defective heating controller and knob assembly can be replaced. To replace the heater core, controller assembly and knob: Disconnect the cigarette lighter on the dashboard. Use a Phillips head screwdriver to remove the dashboard and instrument panel covering piece.

How to flush Ford Ranger coolant system ( manual )?

This topic contains 4 replies, has 4 voices, and was last updated by jesuslovesyou101 9 years, 2 months ago. I am having brownish goop show up on the Radiator cap.

Is there a service manual for a Ford Ranger?

FORD RANGER SERVICE & REPAIR MANUAL (2001 2002 2003 2004 2005 2006 2007 2008) – DOWNLOAD! FORD VEHICLES 2000-2004 ALL MODELS FACTORY SERVICE MANUALS (Free Preview, Total 5.4GB, Searchable Bookmarked PDFs, Original FSM Contains Everything You Will Need To Repair Maintain Your Vehicle!)

What kind of fluid does a Ford Ranger use?

In answer to your question about the fluid in the manual transmission, according to Mitchell OnDemand (which gets it’s information direct from the manufacturer), you truck uses Mercon automatic transmission fluid.

Why does my Ford Ranger have a rough idle?

While there are a variety of reasons your Ford Ranger has a rough idle, the most common 3 are a vacuum leak, an issue with the spark plugs, or a problem with the ignition coil. See what others are asking about their Ford Ranger. Get answers from RepairPal’s community of auto experts and enthusiasts.

How can I find out if I have a vacuum leak?

Small cracks in a hose can cause a vacuum leak. A visual inspection may not be able to find this type of small leak. Turn the engine off and make sure hose clamps are tight. Vacuum leaks often occur at the point where a hose attaches to a solid piece of the engine. Make sure the clamps that hold the hoses onto the engine are tight.

What kind of engine has 4.2L vacuum hoses?

Give me a vacuum hoses routing picture for my truck XL, 4.2L gasoline engine. I greatly appreciate your previous advice. have the same problem? I found this diagram. The only f-150 with a 4.2

Where is the EGR on a vacuum hose?

If yyou have access to a vacuum gauge, run a line to the green line (EGR disconnected) so that you can watch the gauge when driving to see if the EGR is being applied. This system also should have an EGR solenoid that could fail keeping it from applying vacuum to the valve

Besides a four-cylinder Pinto and Cologne V6, there was also a newly developed Vulcan V6 engine that offered improved performance and fuel economy. Being more of a sport truck than a work-horse, this generation had no diesel option.

Are there any free manuals for Ford Ranger?

Every Manual available online – found by our community and shared for FREE. Enjoy! Ranger is Ford’s attempt in a crowded compact pickup truck, whose production spans for several decades and four generations. Throughout these years, it held a considerable market share and rack up respectable sales figures of over 7 million units sold.

What kind of body does a Ford Ranger have?

Ranger featured body lines that mimicked those of larger F-series trucks and a flagship LTD, later known as Crown Victoria. With flat surfaces and straight edges mated to a characteristic front grille and headlight design, it looked as a scaled-down F-150.

When did the Ford Ranger get a 2.9L engine?

The 2.9L co-existed alongside the 3.0L, the Engine which replaced it, until 1992, when Ford introduced a “More Refined” Ranger. The 2.9L wasn’t a refined engine like the 3.0L “Vulcan”.

How big is a Ford 2.9L V6 engine?

The Ford Cologne 2.9L V6 is a 60° cast iron block V6 engine built by the Ford Motor Company in Cologne, Germany, hence the name. Over the years, the Cologne V6 was available with engine displacements of 1.8, 2.0, 2.3, 2.4, 2.6, 2.8, 2.9 and 4.0 litres.

What causes a Ford 2.9L engine to fail?

This quickly led to cam bearing damage, triggering valve train oil pressure loss. As a result, these two design faults led to catastrophic engine failure in many North American 2.9s. Valve covers have been known to leak. Other than making the engine look nasty and smell nasty, these pose no danger.

When did the Ford Ranger get a 2.9 liter engine?

Use of synthetic oil and proper cooling system maintenance is essential if owners of early-model 2.9s wish to avoid trouble. The 2.9L co-existed alongside the 3.0L, the Engine which replaced it, until 1992, when Ford introduced a “More Refined” Ranger.

How do you remove cylinder heads on a Ford Ranger?

Click HERE for information on removing your cylinder heads. Port your upper and lower intake. The intakes don’t line up diameter to diameter. Porting opens this up and allows better flow. Knife edge the intake side of the throttle body to remove the front lip.

What happens to an engine when there is a vapor lock?

When gasoline in the fuel lines or fuel pump turns from liquid to gas, it starves the engine of fuel and it stops running. When a vapor lock occurs, your engine will begin to sputter and lose power, the turn off. It won’t start though, no matter how hard to try initially.

Are there leak prone areas on Ford Ranger 4.0?

I cleaned the MAF sensor, and eventually replaced it with another sensor. Is/are there any leak-prone area (s) on a 4.0 that I might look for? Truck is a 2002 4X4 extended cab with 82K miles. Truck seems to run well, and I get around 15 MPG combined but that persistent Check Engine Light is bugging me!

Where does the vacuum line go in a Ford firewall?

Easiest way to find out is crank the car. The vacuum line that should go into the grommet will have vacuum (you can feel the vacuum sucking by putting your finger on it). Hope this helps View attachment 52532 View attachment 52532

Is there a vacuum leak in the 4.0 engine?

Discussion in ‘ 4.0 Engine ‘ started by bameyer, Mar 7, 2013 . I evidently have a vacuum leak that keeps turning on the CEL. Scan keeps showing P1000-MAF problem.

How many miles does a Ford Ranger get?

Truck is a 2002 4X4 extended cab with 82K miles. Truck seems to run well, and I get around 15 MPG combined but that persistent Check Engine Light is bugging me! Ranger Forum Sign Up! Join RangerForum.com Today – It’s Totally Free!

What’s the problem with the clutch on a Ford Ranger?

Issue: You have to push the clutch to the floor to shift gears. Problem: More times than not, you still have air in the clutch line and need to further bleed the system. Fix: If a new installation: check pedal height and adjust to factory specifications.

How are elbow water line fittings supposed to work?

Elbow water line fittings trap water, which may freeze and defrost, creating cracks. Elbow fittings may either be pipe thread, or compression style. Pipe-threaded fittings should be wrapped in Teflon, before being screwed into place.

How do you repair a water line in an RV?

If you need to repair a larger section, simply buy a water line that is the same length (as that you intend to cut), and the appropriate RV water line fittings. Plastic water lines can be easily cut using a knife. Copper lines can be cut using a tubing cutter.

Where is the radiator hose located on a Ford Ranger?

The 8th digit is a U. The lower radiator hose is a Y. It connects from the radiator to the engineblock at the bottom ,as well as branching off the main big hose and connecting to the thermostat by connecting to a ‘hot-water elbow’ which screws into the side of the thermostat housing on the manifold.

Where is the coolant sensor on a Ford Ranger?

It connects from the radiator to the engineblock at the bottom ,as well as branching off the main big hose and connecting to the thermostat by connecting to a ‘hot-water elbow’ which screws into the side of the thermostat housing on the manifold. That hot water elbow also is where the coolant temp sending unit (or the coolant sensor) screws in.

How to change temp on Ford Ranger 2.3L?

1995 Ford Ranger 2.3L. Temp gauge is completely bottomed out…does not budge. Replaced the temp sending unit near the oil filter (single lead unit), it did nothing to change the gauge. What to try ne…

What’s the temp on a 1995 Ford Ranger?

1995 Ford Ranger 2.3L. Temp gauge is completely bottomed 1995 Ford Ranger 2.3L. Temp gauge is completely bottomed out…does not budge. Replaced the temp sending unit near the oil filter (single lead unit), it did nothing to change the gauge.

How many vacuum check valve Fords are left?

Only 1 left in stock – order soon. . Only 11 left in stock – order soon. . . Only 14 left in stock – order soon. . Only 11 left in stock (more on the way).

Where is the heater / AC control vacuum check valve and the check valve?

In case this is not making sense no. 5 in the first pic is the source vacuum no.5 in the connector pic. No. 13 in the first pic is to intake manifold vacuum. This helps a lot. To confirm, what I need to do is: 2) Install – anywhere convenient – a new reservoir and check valve (items 15 and 14 in the diagram)

Where is the vacuum in the engine compartment?

There is vacuum at the connection of the red line and the black line in teh engine compartment, but none on the black line on the inside of the firewall. What’s in-between (and whether they’re even related) is my mystery.

Where is the check valve on a vacuum?

Open and secure the hood. Step 2: Locate the brake booster check valve. The brake booster check valve is typically found on the brake booster. If it is not found on the brake booster, it may be in line with the vacuum hose.

Only 1 left in stock – order soon. . Only 11 left in stock – order soon. . . Only 14 left in stock – order soon. . Only 11 left in stock (more on the way).

How do you remove a vacuum brake check valve?

When removing the vacuum hose from the vacuum brake booster check valve, use a twist and pull method. The twist should break the seal and allow you to pull the hose off. Step 6: Remove the vacuum brake booster check valve. Removing the check valve can sometimes be as easy as using the twist and pull method.

What are the parts of a Ford Ac unit?

Ford AC tubes, pipes, fittings and other repair parts are subjected to strict in-vehicle and functional tests to help them perform as specified by Ford Engineering. These components are designed for specific applications and for easy installation. They include fittings, O-rings, seals and insulators – ready to install out of the box.

What kind of air conditioner does a Ford have?

A/C Compressors and Condensers. Air conditioning compressors and condensers work together to remove moisture from the air as it’s cooled. Ford Motor Company builds them to exacting standards, and they are the only parts recommended for your Ford or Lincoln vehicle.

Do you need a heater for a Ford Ranger?

Only 1 left! The Ford Ranger is a compact to mid-size pickup with multiple generations and updates to its cabin. After some time, you may need to change the A/C or heating controllers. With a wide selection of A/C and heater controls, you can find what you need for your Ford Ranger.

How can I change the temperature of my Ford Ranger?

Select by your trucks model year: Different Ford Ranger model years and trim levels have different sizes and styles of hardware. This can include face plates, knobs, and other accessories for controlling the temperature of the passenger cabin.

What are the symptoms of a bad EGR control solenoid?

One of the first symptoms of a possible problem with the EGR control solenoid is engine performance issues. If the EGR solenoid has any issues, it can cause the finely tuned air fuel ratio to be thrown off. This may result in a decreased power, acceleration, fuel economy, as well as an increase in emissions.

What are the parts for a 2000 Ford Ranger?

Front Replacement Control Arm Kit – for 2000 Ford Ranger 2.5L 153Cu. In. l4 GAS SOHC Naturally Aspirated – XL Standard Cab Pickup 2-Door 2.5L 153Cu. In. l4 GAS SOHC Naturally Aspirated Loading Reviews… Quality: Value Line – High quality automotive part with the highest cost savings. Loading Reviews…

When did the Ford Ranger Super Cab come out?

There were some upgrades to the Ford Ranger transmission in 1985 with the five-speed manual becoming the standard feature on trucks. Ford did not introduce major changes in the Ford Ranger design until 1986. During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style.

Ford used the non-turbo 2.3-liter widely. It was the base engine for the Aerostar minivan, compact Courier pickup, and the Courier’s successor, the Ranger. It also powered the Mustang, Fairmont, the luxury-oriented LTD, and the Mercury Bobcat and Zephyr.

What’s the compression ratio on a Ford Ranger?

The 1994 to 1997 engines had a 9.4-to-1 compression ratio. The engine was carbureted through 1984, and then switched to a multiport electronic fuel-injection system in 1985. In the 1983 Ford Rangers, the horsepower was only rated at 79, but it climbed to 82 in 1983, 100 in 1989 and finally 112 horsepower in 1996.

What was the horsepower of a 1983 Ford Ranger?

The engine was carbureted through 1984, and then switched to a multiport electronic fuel-injection system in 1985. In the 1983 Ford Rangers, the horsepower was only rated at 79, but it climbed to 82 in 1983, 100 in 1989 and finally 112 horsepower in 1996. Its top torque rating was 135 foot-pounds.

How much is a power steering hose for a Ford Ranger?

The best part is, our Ford Ranger Power Steering Pressure Hose products start from as little as $18.99. When it comes to your Ford Ranger, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Power Steering Pressure Hose product and part brands so you can shop with complete confidence.

Where can I buy 1994 Ford body parts?

RockAuto ships auto parts and body parts from over 300 manufacturers to customers’ doors worldwide, all at warehouse prices. Easy to use parts catalog. 1994 FORD Parts | RockAuto

How to troubleshoot the fuel injection for a Ford Ranger?

If power is supplied to the pump but the pump doesn’t come on, replace the pump. If no power is supplied to the pump, replace the fuel-pump relay. If fuel pressure is normal go to the next step. Unplug one of the wiring-harness connectors attached to the fuel injectors. Plug the injector-harness tester into the harness connector.

Can you test for a blown head gasket on a Ford Ranger?

In about 90% of the time, these two first head gasket tests will positively confirm a blown head gasket on your 3.0L, 3.8L Ford Ranger (or Topaz, Probe, Tempo, or Mazda B3000, etc.). If this first head gasket test confirms that the head gasket is burned, you don’t need to do the other tests.

Why is my fuel pump not working in my Ford Ranger?

Cycle the ignition key from off to on several times to pressurize the system. System pressure should be greater that 45 psi. If no fuel pressure develops in the system, the most likely causes are the fuel-pump fuse, fuel-pump relay, or fuel pump.

Why is the coolant in my Ford Ranger leaking?

The problem is that water will freeze in the winter time and cause the engine block, heads, freeze plugs, or some other part of the engine to freeze up. If your Ranger’s cooling system is leaking water or coolant, here are the most common places that it may be leaking from.

Where does the water come from on a Ford Ranger?

There is a housing that bolts to the block that holds the thermostat. It’ll have a radiator hose attached to it. It is very common to find that your Ranger is leaking water or (hopefully) coolant from this location. It’ll be toward the front of the vehicle, further up than where the A/C condensation would be.

What causes the head gasket on a Ford Ranger to fail?

Head Gasket – Your Ranger’s head gasket is designed to fail before permanent damage is done to the block or head when overheating. This does not mean that the head gasket will only fail if the engine has overheated. If the head gasket is blown, it could let coolant out of the engine onto the ground.

Why does my Audi A4 keep leaking water?

If you, or whoever had the vehicle before you filled the cooling system up with water instead of antifreeze coolant, it could be leaking water. The problem is that water will freeze in the winter time and cause the engine block, heads, freeze plugs, or some other part of the engine to freeze up.

U can go pick up a Haynes shop manual at just about any auto parts store, in the back of it it will have wire and vacuum diagrams 2 people found this helpful.

Where to get automatic transmission parts for Ford Ranger?

Ford Ranger automatic transmission parts are key to this, and replacing them with durable components from AutoZone keeps your pick-up going for the long haul. Loading Price .. Use the form above to tell us what you drive. Notes: The VIN# is required to ensure that the correct part is shipped. Tag ID 7L5P-CA, 7L5P-CB, 8L5P-CA, 9L5P-CA, BL5P-CA.

Where can I buy a Ford Ranger truck?

Buy Online. Pick Up In-Store. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Light and durable Ford Ranger trucks are like no other pick-up, with the power and flexibility to accomplish big jobs. That’s because it puts all its power right where you need it to go.

What should I do if my Hoover Hoover wont turn on?

It’s an easy fix first turn off and unplug your Hoover. Then remove the screws from the back of the handle. Make sure the self-propelled switch and power switch are set to off on the handle. Also, make sure the power switch on the body of the machine is set for off. As well then insert the handle back into the unit and screw it in tightly.

How much does it cost to replace a Hoover filter?

You can order a replacement filter for about $10 on the Hoovers’ official website, you can able to find it on Amazon. If you have other problems with your vacuum, you should call customer care service. You have a 2-year limited warranty on this machine.

Is the Ford Ranger a live front axle?

Note: the 2001-2011 4WD Ford Ranger has a live front axle. What that means is that the front wheels are permanently connected to the front axle, and do not use a locking hub. Misconceptions: Some believe that when you activate the 4WD, power is sent to all (4) wheels. I can see where people get that idea….from the name.

How does the 4WD system work on a Ford Ranger?

When the Ranger is in 4WD, the transfer case splits the power between the front and rear axles. The front axle uses a locking hub (1983-2000) to lock (connect) the front wheels to the axleshafts. If these hubs are not locked, the wheel will not receive power from the axle. Note: the 2001-2011 4WD Ford Ranger has a live front axle.

What kind of suspension does a Ford Ranger have?

The big change in the 4WD for 1998 was a redesigned front suspension/axle setup. The Ford Ranger switched from the TTB independent front suspension, to a Short arm Long Arm (SLA) suspension (Dana 35 SLA). Another change was the introduction of Pulse Vacuum (PVH) Hubs.

Why did my 2.9L Ranger engine fail?

Compared to the relatively stout European heads, the North American 2.9 had apparently been subject to a reduction of material around the valve stem guides and rocker shaft mounting pedestals. Some engines would suffer from this failure after overheating only once.

How many horsepower does a Ford Ranger have?

The cylinder heads also sport a more conventional three-port exhaust manifold. Output was rated at 140 hp @4600 rpm for the Light trucks (1986-92 Ranger & 1986-90 Bronco II) and 144 hp @4800 rpm for the Merkur Scorpio in the US market and anywhere from 150 to 160 hp for the European Market.

Over the years, the Cologne V6 was available with engine displacements of 1.8, 2.0, 2.3, 2.4, 2.6, 2.8, 2.9 and 4.0 litres. All except the Cosworth 24v derivative and later 4.0 litre sohc engines were pushrod overhead valve engines, with a single camshaft between the banks.

How big is a Ford 4.0 SOHC engine diagram?

Description : Parts® | Ford Piston Rings, Ranger, Part Of Piston. – 4.0L throughout Ford 4.0 Sohc Engine Diagram, image size 600 X 820 px, and to view image details please click the image. Here is a picture gallery about ford 4.0 sohc engine diagram complete with the description of the image, please find the image you need.

Where can I find a 1972 Ford vacuum diagram?

The contents of this product were extracted from: 1972 Wiring and Vacuum Diagrams (Form FD-7795P-72), 1965/1972 Ford Car Master Parts and Accessory Catalog (Form FP-7635B), 1972 Car Shop Manual (Volume III, FORM 7098-72-3), and

What’s the color code on a Ford vacuum?

158 Black-Pink HASH STRIPE However, the Car Standard Wire Color Code Chart lists: 158 – Black- Pink HASH ATTENTION Please Read This It is important to note that there may be errors in the diagrams, even though they are original Ford publications.

Can a Ford Ranger 3.2 intake pipe be repaired?

If you are venturing out into the unknown with your 3.2 Ford Ranger and your intake pipe appears fine, as a precautionary measure, take along some heat-resistant silicon tape and a few extra steel pipe clamps in the event you need to carry out an emergency repair in the sticks. It’s a fairly simple repair that requires only basic tools.

Is there a Ford heater hose under intake replacement?

– YouTube FORD 4.6 , 5.4 , 6.8, HEATER HOSE UNDER INTAKE REPLACEMENT THE EASY WAY !!! If playback doesn’t begin shortly, try restarting your device.

What to do if your Ford Ranger has a leak?

One way to inspect is to allow the engine to idle for a bit to build up pressure, then run your hand along the intake pipe to feel for any air blowing out. Next, shut it down and listen out for any sucking noises emanating from the intake pipe that indicates a leak.

What kind of bed does a Ford Ranger have?

READ MORE If you’re a truck collector, you know what a unicorn this is: a first generation Ford Ranger with the much sought after, ultra-rare fiberglass “Southern Coach” stepside bed. These were sent from the… READ MORE

Who is the owner of the Ford Ranger?

Like many off-road trucks, “Big Darla” (owned by TRS forum member ‘XionicWaste‘ (Tommy Untiedt)) has seen many modifications and transformations since it first appeared in our forum in 2011. Tommy’s original truck was… READ MORE DEARBORN, Mich., Nov. 18, 2020 – For once, what happened in Vegas, does not have to stay there.

What kind of lift does a Ford Ranger have?

Australians are best known for adding suspensions lifts and snorkels to their Ford Rangers, but Dave Gardner from Gardner Mods had a different plan for this Ford Ranger. Gardner Mods got the vehicle…

What kind of vehicle is the Ford Ranger?

Ricardo has a longstanding and well-deserved reputation for the creation of high quality, cost-effective special vehicles for the world’s armed forces, based both on bespoke concepts and on the adaptation of existing automotive… READ MORE