How do you reset the oil change light on a 2010 Dodge Ram 1500?

How do you reset the oil change light on a 2010 Dodge Ram 1500?

How To Reset Oil Change Light On Dodge Ram 1500 / 2500

1. Stick the key in the ignition turn it to be run position without starting the engine.
2. Fully depress the GAS PEDAL slowly three times within 10 seconds.
3. Turn off the car.

How do you reset the oil change message on a Dodge Ram?

How to Reset Oil Life/Service Reminder on the Dodge RAM 1500, 2500, and 3500

1. Place the ignition in the “ON/RUN” position.
2. Push the accelerator pedal slowly 3 times within a 10 second interval.
3. Turn the ignition off.
4. When you start the vehicle again, the Oil Life will be reset.

What is ESP on Dodge Ram?

The ESP BAS light is a trouble indicator light that indicates that there is an issue with your Dodge Ram’s Electronic Stability Program (ESP) and/or your Brake Assist Program (BAS). These systems are important to the safety of your Ram. Fixing them should be a top priority.

Why do I need to remove the dashboard of my Dodge Ram?

This article applies to the Dodge Ram (2009-present). Why would anyone want to remove the dashboard of their Dodge Ram pickup? Perhaps you want to install an aftermarket stereo system for a much better sound, or you’re installing a DVD player for your family to watch while you’re traveling.

What to remove from a Dodge Ram truck?

Remove the steering column as necessary. Remove the Wireless Ignition Node (WIN) from your vehicle. Figure 2. Remove steering wheel and column. Figure 3. Steering column diagram. If your truck has one, remove the floor console. Remove the lower center bezel as well.

How do you remove the steering column from a Dodge Ram?

Remove the steering column opening cover. Remove the steering column as necessary. Remove the Wireless Ignition Node (WIN) from your vehicle. Figure 2. Remove steering wheel and column. Figure 3. Steering column diagram. If your truck has one, remove the floor console. Remove the lower center bezel as well. Figure 4. Floor console diagram.

How do you remove defroster grille on Dodge Ram?

Lower center bezel. Remove the lower trim from the inside of the pillar. Unsnap and remove the trim cover. Do the same for the opposite side. Figure 7. Removing the pillar trim. Removing the defroster grille can be an arduous job with all the screws holding it in. Make sure to get all the various screws securing the grille to the dash. Figure 8.

Remove the steering column as necessary. Remove the Wireless Ignition Node (WIN) from your vehicle. Figure 2. Remove steering wheel and column. Figure 3. Steering column diagram. If your truck has one, remove the floor console. Remove the lower center bezel as well.

How do you remove the dashboard from a Dodge Ram?

Open the glove box door. Push on the back panel of the glove box to release it from the stops. Figure 14. Glove box removal diagram. The instrument panel storage bin needs to be removed next. Figure 15. Instrument panel storage bin. Now begin removing the air bag on the passenger side. Unhook the wire harness securing the module. Figure 16.

Lower center bezel. Remove the lower trim from the inside of the pillar. Unsnap and remove the trim cover. Do the same for the opposite side. Figure 7. Removing the pillar trim. Removing the defroster grille can be an arduous job with all the screws holding it in. Make sure to get all the various screws securing the grille to the dash. Figure 8.

Remove the steering column opening cover. Remove the steering column as necessary. Remove the Wireless Ignition Node (WIN) from your vehicle. Figure 2. Remove steering wheel and column. Figure 3. Steering column diagram. If your truck has one, remove the floor console. Remove the lower center bezel as well. Figure 4. Floor console diagram.