What does the error code p0017 stand for?

The error code P0017 specifically refers to Bank 1 Sensor B. This information helps you understand the exact part that is not working properly. Many engines have multiple banks, each containing some of the cylinders. To know what Bank 1 Sensor B means for your vehicle, you will need to consult a diagram of your engine.

What causes a crankshaft to be in p0017 position?

To sum things up, the common causes for code P0017 are as follows: 1 A faulty cam or crank sensor 2 The cam or crank circuit is open or shorted 3 The timing belt/chain is out of time 4 The cam or crank tone ring is slipped/broken 5 A problem in the VVT system 6 The PCM is faulty

What does the p0017 Chevy CKP sensor mean?

P0017 CHEVROLET Meaning. The Crankshaft Position (CKP) sensor is a permanent magnet generator, known as a variable reluctance sensor. The magnetic field of the sensor is altered by a crankshaft mounted reluctor wheel that has seven machined slots, 6 of which are equally spaced 60 degrees apart.

What is the p0017 code for terrain V6?

2010 Terrain V6 displays error code P0017 for crank/cam sensor but runs perfect. Any ideas?… Need more help with a p0017 code? If you still need help regarding the P0017 trouble code, please post your question in our FREE car repair forums. NOTE: This information is presented for information purposes only.

What does the OBD code p0017 mean?

What the P0017 code means. P0017 is the OBD-II generic code indicating that the crankshaft and camshaft position sensor for bank 1 exhaust camshaft do not correlate signals with each other.

What does p0017 mean on a GMC Terrain?

P0017 should be considered an important trouble code to diagnose and repair. The crank and cam sensors work in tandem to produce the ideal air/fuel ratio for your engine. When this timing is off, the engine will typically not run (or barely run). Here are the major symptoms of P0017 in the Terrain:

How much does it cost to repair a p0017 Chevy?

The cost of diagnosing the P0017 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When do I set the trouble code p0008?

Trouble code P0008 is most likely to be set when there is an issue with the timing chain. These are a couple of the major causes of the issue: The timing chain has stretched and is no longer under sufficient tension The timing chain tensioner has malfunctioned

What does p0008 mean on an ECM?

It does this by monitoring them using the Camshaft Position Sensor (s) and Crankshaft Position Sensor. If the Engine Control Module (ECM) detects that the bank 1 camshaft and crankshaft are not in the correct position, it will trigger code P0008.

What to do if your check engine light says p0008?

Check to see if there are any other codes along with P0008 and clear your Check Engine Light with FIXD. Check the freeze frame data in order to pinpoint the issue. Check for any Technical Service Bulletins (TSB) General Motor vehicles (GMC, Chevrolet, Buick, Suzuki, Cadillac, Holden) specifically have a known issue with stretched timing chains.

How much does it cost to diagnose p0017 GMC code?

The cost to diagnose the P0017 GMC code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What does the error code p0017 stand for?