What should voltage be on Dodge Dakota Body Control Module?
What should voltage be on Dodge Dakota Body Control Module?
The 12v square wave selection on the 20-volt scale provides a good view of the bus activity. Voltage on the bus should pulse between zero and about seven and a half volts. The PCI Bus failure modes are broken down into two categories. Complete PCI Bus Communication Failure and individual module no response.
What is the bus circuit on Dodge Dakota?
The PCI bus circuit is identified as D25 and is violet with a yellow tracer. Additional tracer colors may be added to the yellow in order to distinguish between different module connections. The modules are wired in parallel. Connections are made in the harness using a splice.
Where is the CTM on a Dodge Dakota?
Central Timing Module or CTM. It is behind the drivers side kick panel. Seany B can your buddy get an electronic control modulle (ECM) for a 2002 R/T ? Need more info on your R/T…Options & such… Here is the info on the module. Hey Seany B. In this whole thread, you haven’t stated what year and model Dakota you have.
What causes a body control module to fail?
Individual module no response can be caused by an open PCI circuit at the module, or an open battery or ground circuit to the affected module. Symptoms of Individual module failure could include any one or more of the above. The difference would be that at least one or more modules would respond to the DRBIIIt.
Where are the wires on a Dodge Dakota?
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2001-2004 Dodge Dakota . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle.
Where do you put the door actuators on a Dakota Durango?
You can get to two of them through the driver side foot-well pretty easily (if you lay on your back and put your head next to the gas pedal). They are interchangeable, so you don’t have to worry about getting the same one from the wrecker.
Where is the AC controler on a Dodge Dakota?
PULL THE AC.CONTROLER OUT OF THE DASH ON THE BACK YOU’LL FIND A BUNCH OF COLORED VAC. LINES.
What to do if your Dodge Dakota exhaust manifold breaks?
Order your replacement parts from us to get more bang for your buck! Issues related to broken exhaust manifold bolts are common among several Dodge Dakota model years. Owners of the affected trucks have reported hearing a ticking noise in the exhaust manifold area, which is a typical sign of an exhaust manifold problem.
