How to flush a GMC Sierra 3500 HD?
How to flush a GMC Sierra 3500 HD?
Fill Coolant – Dilute coolant with distilled water and fill 10. Locate Hoses – Locate the coolant hoses and connection points 11. Burp System – Remove excess air in the cooling system 12. Replace Cap – Put the reservoir cap back on
How to do a coolant flush on a Dodge Journey?
Fill Coolant – Dilute coolant with distilled water and fill 10. Locate Hoses – Locate the coolant hoses and connection points 11. Burp System – Remove excess air in the cooling system 12. Replace Cap – Put the reservoir cap back on 13. Replace Cover – Put the cover back on underneath 14.
Where is the low coolant message on a Duramax?
During PDI, coolant should be added to fill the upper chamber of the radiator surge tank. (Fig. 6) A coolant level that is low enough to turn on the Low Coolant message will be below the horizontal line across the radiator surge tank. (Fig.
Do you mix coolant with distilled water?
Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed…that is, you don’t need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.
During PDI, coolant should be added to fill the upper chamber of the radiator surge tank. (Fig. 6) A coolant level that is low enough to turn on the Low Coolant message will be below the horizontal line across the radiator surge tank. (Fig.
Is there a problem with coolant loss on Ram 1500?
Been fighting coolant loss from day one, much like many of you. I took it in, they replaced the EGR. No change in coolant loss. Took it in again where they pressure tested the cooling system at an unknown pressure overnight. No loss in pressure. They would not investigate further.
Is there a problem with coolant loss in a truck?
No change in coolant loss. Took it in again where they pressure tested the cooling system at an unknown pressure overnight. No loss in pressure. They would not investigate further. I continued to lose coolant without ever having an overheat issue, even in 100* and towing 8600 pounds.
Where is the coolant catch on a Ram 1500?
At 22.5psi and 212 degrees, it should be boiling over and dumping coolant and making a mess all over the place. Not here. Just smooth sailing. The coolant catch bottle I installed with the tube from the bottom of the degas bottle in it, along with some coolant that was caught.
