How tight should Zerk fittings be?
How tight should Zerk fittings be?
The mating connection should be snug but not so tight that one has to rip the end off. Clean the zerk off of the ones that are tight and compare them with the ones that are not.
Why do grease guns get stuck on Zerk fittings?
Grease guns get stuck on fittings due to clogged zerk fittings which don’t let the grease pass through and cause a pressure build up that prevents them from releasing. So to get it unstuck unscrews the hose or hardline from the gun which will release the pressure and allow it to come off.
How often do you grease U joints?
Greasable options typically have recommended grease intervals for on-highway applications of 40,000-50,000 miles or corresponding to normal maintenance schedules.
What size thread is a Zerk fitting?
1/4″
The most common standard grease fitting size is 1/4″‑28 SAE‑LT and is often used in automotive applications. They can also be found in agricultural environments as well as other various standard duty applications. For heavy duty applications, larger 1/8″‑27 PTF zerk fittings can be found.
How do you get grease out of a Zerk fitting?
Here we will show you a simple way to clear that zerk fitting. First, remove the zerk fitting and attach it to your grease gun. Try pumping some grease through the zerk and this will sometimes push hardened grease out of the fitting. If there is still no grease moving you can take a propane torch and heat up the zerk.
Is there a jack under the Dodge Caravan?
Stay clear of the wheels when placing jack stands under the Dodge Caravan frame. Teeter Allen Morrison has been writing for more than 20 years. His work has appeared in Peterson Publishing’s “Stock Car” magazine’s Technical section and he has authored some popular articles for various websites.
How to remove the parking brake on a Dodge Grand Caravan?
Shown here are informational directions for the removal of the parking brake (also called an emergency brake) assembly and the front parking brake cable on a 1996 Dodge Grand Caravan. (For installation, do this in reverse.) In order to remove the assembly, the steering column cover and the reinforcement underneath it must be removed.
Do you need a Zerk fitting for a tie rod?
Tie rod ends have an articulating metal stud that needs grease to keep your steering smooth. A zerk fitting makes this process very simple and gives you an easy way to keep those tie rod ends in good shape.
What to do if your minivan makes a clunking noise?
A Mechanic’s stethoscope may be helpful in tracking down the noise. It does come in handy for tracking down engine noises, like a whirring pulley. If the bushings aren’t expensive, I would try those to see if it makes a difference.
How do you change the sway bar on a Dodge Caravan?
The vehicle featured is a Dodge Caravan 2002. Clean the floor, put something down on the floor so you are not on concrete. Raise the vehicle. Get lights placed. Get tools near by. Just unbolt the old bushings. There isn’t much tension on the sway bar. Take the bolts loose, take the bracket off.
When did I replace the motor mounts on my minivan?
Two different mechanics looked at this in 2008 and I let one who was very convincing replace the front and rear motor mounts and both outer tie rods (About $600). I’ve since learned how to do suspension work myself.
