Where are the axles on a Dodge Ram 1500?

The commonest types of axles are front, rear, and stub. Worth mentioning that getting deeper into axles will help you understand how to find axle ratio Dodge Ram 1500. It locates at the vehicle’s front, assisting the steering in absorbing the road shocks. They are of two types; dead and live.

Can a Ram 1500 fit a Dana 60m axle?

Ram 1500 w/ Dana 44-60 (Will not fit Dana 60M axle.) Ram 2500, 3500 w/ Dana 44-60 (Will not fit Dana 60M axle.) The Perm-Lok permanently engages the Central Axle Disconnect (CAD) system and couples both front axles permanently. Once installed, the front axles will not pull until the transfer case in engaged.

How many wheels does a Dodge Ram have?

Most vehicles come with four or two-wheel pairs, each in the front and rear. Of course, two pairs of wheels equal to two axles. This rule doesn’t apply in all vehicles as the engine power and suspension system also determines their number of axles. However, the Ram 1500 has two axles that spin the wheels.

How big is the front end of a Dodge truck?

Chrysler has a wide range of front and rear ends! We carry everything from the 7.25″ front and rear end parts, to the large 11.8″ rear end parts for Ram trucks. We make it easy to verify your exact rear end by providing specs and year, make, and model applications for each differential listed.

How to replace a front axle on a Dodge Ram?

This video covers how to replace a front axle universal joint and a hub or wheel bearing in a 1999 dodge ram 1500 4 wheel drive. Very similar to a 2500. It may be less damaging to loosen the hub bolts and tap on them with a hammer vs the method shown in this vid. Loading…

What kind of axle does a Ram 1500 have?

When the front axle is locked, you can disengage the passenger side in order to make turns without wheel hop. Ram 1500 w/ Dana 44-60 (Will not fit Dana 60M axle.) Ram 2500, 3500 w/ Dana 44-60 (Will not fit Dana 60M axle.)

What kind of axles does a Dodge 4×4 have?

Gas 3/4 tons came with both the 44 and the 60 with a 60 in the rear. CTD had 60 fronts and 70’s or 80’s in the rear. 1 tons came with both the 44 and 60 front and 60/70/80 rears. It all depends on how it was ordered. I have had two parts trucks for my RC. The 350 had a 44 non disco front and 60 rear and the 250 had 60’s F&R.

Where are the axles on a Dodge Ram 1500?