How do you reset the service light on a 2015 Mercedes Sprinter?

How do you reset the service light on a 2015 Mercedes Sprinter?

Reset Mercedes Sprinter Service Indicator:

1. Switch ignition ON position without starting engine.
2. Allow all the warnings and messages to clear and the mileage displays before next step.
3. Press and hold the “0” button on the instrument cluster for 30 seconds or until you hear a beep.

How to reset service indicator on MB sprinter?

1. Switch on ignition. If the exceeding of the maintenance interval is shown in the display, you have to wait until the readout in the display automatically jumps over to total km. Only then is it possible to get into the service menu. 2. Press button 0 on the instrument cluster for approximately 30 seconds until a beep sounds. 3.

How do I complete service on my sprinter?

Press and hold the 0 button on the dash. Hold it until it beeps. This could take about 30 seconds, so be patient. Press the 0 button and it will show Service to be completed, then press the Up arrow to select complete service. Now it will show the oil grade.

How to reset the oil can on a sprinter?

Press button 0 on the instrument cluster for approximately 30 seconds until a beep sounds. 3. On diesel engines with a long oil change interval: Press button M (1) repeatedly until “rESEt .51 / rESEt .31” is shown on the display, or on older instrument clusters “rESEt 229.5 / rESEt 229.3” is shown together with the oil can symbol. 4.

How do you check mileage on a sprinter?

The instructions below apply to Sprinters that have steering wheel buttons. If your Sprinter doesn’t have steering wheel buttons follow the instructions as per this guide. Insert key in the ignition and turn to position II. Press the menu buttons on the left side steering wheel until you see the mileage.

1. Switch on ignition. If the exceeding of the maintenance interval is shown in the display, you have to wait until the readout in the display automatically jumps over to total km. Only then is it possible to get into the service menu. 2. Press button 0 on the instrument cluster for approximately 30 seconds until a beep sounds. 3.

Press button 0 on the instrument cluster for approximately 30 seconds until a beep sounds. 3. On diesel engines with a long oil change interval: Press button M (1) repeatedly until “rESEt .51 / rESEt .31” is shown on the display, or on older instrument clusters “rESEt 229.5 / rESEt 229.3” is shown together with the oil can symbol. 4.

When do I need to change the service light on my sprinter?

Between 2013 and 2014 we have been prepared various Sprinter updates, including the redesign of interiors and exteriors, new security installations such as the anti-collision system and the new BlueTEC engine OM651. Time needed: 7 minutes. When maintenance service is due, the Service minder or Spanner light will appear on the display.

The instructions below apply to Sprinters that have steering wheel buttons. If your Sprinter doesn’t have steering wheel buttons follow the instructions as per this guide. Insert key in the ignition and turn to position II. Press the menu buttons on the left side steering wheel until you see the mileage.