What kind of coolant does a Dodge Ram have?

This HOAT G-05 formulated coolant is specified for the third generation to present Dodge Ram vehicles, as they are factory filled with 5-year/ 100.000 mile coolant. This coolant is red/orange in color. 2).

Can You flush the cooling system on a Dodge Ram?

Flushing your cooling system is an easy process that only takes minutes to do yourself. Your water pump and, crucially, your engine will thank you. This article applies to the Dodge Ram 2nd Generation (1994-2001).

What kind of coolant do you use on a Cummins diesel?

Go with the Vavoline Zerex G-05, The HOAT formula is what was designed to be used with the cooling system. Available at NAPA, I did a flush on mine when i got a hole in my radiator make sure to use distilled water too.

When does the a / C Drain in a Dodge Ram?

This article applies to the 2nd generation Dodge Ram (1994-2001). When the A/C in your Dodge Ram operates, water is produced and is supposed to drain out of the cooling system and truck cabin via the drain hose.

How often do you change coolant in a Dodge truck?

Also Cummins certifies it as OEM on the back; Dodge uses there coolant in these trucks. I would change the fluid every 50,000 miles its not too expensive and keeps everything running right I should know my radiator fluid was supposedly good but it messed up my water pump and blew all over my engine along with my belt what a mess.

What are the symptoms of a bad coolant reservoir?

Coolant leaks. Another symptom of a potential problem with the coolant reservoir is coolant leaks. If the coolant reservoir cracks or breaks due to old age or overheating it will leak. Small leaks may produce steam and drips, while larger leaks will produce streams and puddles, as well as an obvious coolant odor.

Where is the radiator drain on a Dodge Ram?

Locate the radiator’s drain valve on the bottom of the radiator. You don’t need to raise the Dodge Ram since it’s a high truck with enough room for this job. Place a tray underneath the drain plug. Then, using your wrench, loosen the drain valve. Let it drain until it’s empty. Figure 2. Loosen the radiator drain valve and drain the coolant.

How do you drain coolant from a radiator?

Place a tray underneath the drain plug. Then, using your wrench, loosen the drain valve. Let it drain until it’s empty. Figure 2. Loosen the radiator drain valve and drain the coolant. After you dispose the old coolant, close the drain plug and fill the radiator with distilled water.

What kind of coolant does a Dodge Ram have?