Can you use 340 intake on a 318?
Can you use 340 intake on a 318?
Yes, you can port match, but it does work much better to build a 318 well so the 340/360 parts work well on it. I have even seen people with 4×4’s to use 318 heads on their 340/360 to try for better low end torque.
How to tell the difference between a 318 and 340?
Either 273, 318, 340 or 360 will be displayed – then a dash (-) and single number. ie: The 340 casting number will be 2780930-340-3. It’s cast into the Left-hand side of the block – large numbers – basically behind the starter.
What kind of engine does a Dodge 340 have?
The 340 V8 was designed from the point of view that a lighter weight engine with decent horsepower would amount to better performance as opposed to extremely large engines like the Dodge 440 and the Ford 462. Chrysler put quite a bit of effort into the making the 340 a respectable engine on the street as well as the race circuit.
What kind of head does a Chrysler 318 use?
The wedge heads (first used by Chrysler on the B engines) were far smaller, and lighter, than the old Hemi and polyspherical heads (318s with the poly heads are still often called “wide blocks” though the block itself is about the same size as that of the LA 318).
What kind of engine does a Mopar 360 have?
More successful was an attempt to replace the 360 with the 318 on 1981 model-year cars, essentially by using a four-barrel carburetor. The 318 four-barrel, used on police pursuit and other cars, produed 165 hp and 240 lb-ft of torque. The two barrel was, by now, down to a mere 130 hp and 235 lb-ft of torque. 318 throttle-body / roller-cam engines
Either 273, 318, 340 or 360 will be displayed – then a dash (-) and single number. ie: The 340 casting number will be 2780930-340-3. It’s cast into the Left-hand side of the block – large numbers – basically behind the starter.
The 340 V8 was designed from the point of view that a lighter weight engine with decent horsepower would amount to better performance as opposed to extremely large engines like the Dodge 440 and the Ford 462. Chrysler put quite a bit of effort into the making the 340 a respectable engine on the street as well as the race circuit.
What’s the difference between 318 and 340 oil pans?
The 340 and 360 use the same mounts, while the 318 is all by itself (unless you have a 273 then that would be the same). The 360 oil pan is different from the 318 and 340, it has a smaller rear sealing face.
What kind of engine does a Chrysler 318 have?
The power ratings of the new LA-series 318 were exactly the same as those for the old polyspherical-head design, 230 hp and 340 lb-ft. Generally, the 318 was a workhorse engine, using a single two-barrel carburetor for most of its life; it took regular gas, and provided good power, reliability, and, for a V8 of its time, economy.
