What do I need for an oil change on a Dodge Charger?
What do I need for an oil change on a Dodge Charger?
To complete this oil change procedure, you’ll need the following items: 6 quarts (5.7 liters) of new SAE 10W-30 oil, a new oil filter, a floor jack, jack stands, a used oil catch container, a 13mm socket with a 3/8″ drive ratchet or a 13mm wrench and an automotive funnel.
When did I change the oil on my Dodge Challenger?
Mopar oil filter is MO-744. Lol well i recently purchased the car at 62,000 miles April 2016. Ive changed the oil 6k miles 1 time on my own and the rest at the shop. but im tired of paying alot for an oil change so i decided to do it myself.
What’s the part number on a Dodge Challenger?
Their part numbers are as follows: Mopar # 68191349AA (or “MO-349”), Fram CH11665, Wix # WL10010 and K&N PS-7026, Ecogard X10040, Hastings LF697, Motorcraft FL2066 and Pentius PCBT4024. Warning: Using an oil filter intended for the 2011, 2012 & 2013 model years on a 2014 or 2015 Challenger may result in an oil leak.
What kind of car is the Dodge Charger?
Owners of other Dodge or Chrysler vehicles such as the Magnum, Challenger, 300, Caliber, Journey, Avenger, Nitro, Durango, Grand Caravan, 200 and Town & Country minivan may also find this guide to be useful.
How do you change the oil on a Dodge Charger?
For most Dodges, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Dodge Charger oil filter wrench. If your Charger is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Charger.
What kind of oil filter does a Dodge Charger use?
Some oil filters compatible with the Dodge Charger’s 3.5L V6 engine include the following with their respective part numbers: Fram XG16, Royal Purple 20-253, Wix 51085 , Bosch 3402, Purolator PL14670 , ACDelco PF13 and Mobil 1 M1-204.
How to change the oil in a Jeep Liberty?
Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9.
Owners of other Dodge or Chrysler vehicles such as the Magnum, Challenger, 300, Caliber, Journey, Avenger, Nitro, Durango, Grand Caravan, 200 and Town & Country minivan may also find this guide to be useful.
