Easy lifehacks

What would cause a diesel to misfire?

What would cause a diesel to misfire?

Misfire is when the fuel air mixture in the cylinder fails to ignite. If that happens in a diesel engine, that means either the fuel/air mixture is wrong, injection timing is wrong, or the compression is too low. Things that can cause fuel/air mixture problems: Clogged or bad injectors.

Why does my Dodge Ram run till it dies?

If I turn off the truck and turn back on , it starts up fine till 5 min. later when it starts all over again. I have a 2002 Ram 1500 4×4 5.9L, truck will cold start run for 10 minutes until its warmed up then die and it wont start again until its cold again. replaced ignition coil because i had no spark there after it died and that didn’t fix it.

Why does my Dodge Ram 1500 not start?

If 50 degrees or hotter truck will shut off and Gage’s don’t read. Sometimes 10 to 30 min turn key if Gage’s move truck will start Gage’s don’t move truck won’t start. The hotter it is outside the more the truck shuts off

Why does my Cummins Engine take so long to start?

When I had my injectors go bad last year it would take a very long time to crank when the engine was cold, like overnight, and not plugged in, so even colder. That is my experience with them. I agree, however the problem tends to get worse when hot if it is injectors, not the other way around…

What’s the long crank on a Cummins diesel?

Long….. Long Crank when starting – The Mighty CUMMINS Turbo Diesel – BOMBER Board Long….. Long Crank when starting Long….. Long Crank when starting Location:Vancouver, WA. Need your help. I started having the long crank issue 2 months ago.

If I turn off the truck and turn back on , it starts up fine till 5 min. later when it starts all over again. I have a 2002 Ram 1500 4×4 5.9L, truck will cold start run for 10 minutes until its warmed up then die and it wont start again until its cold again. replaced ignition coil because i had no spark there after it died and that didn’t fix it.

If 50 degrees or hotter truck will shut off and Gage’s don’t read. Sometimes 10 to 30 min turn key if Gage’s move truck will start Gage’s don’t move truck won’t start. The hotter it is outside the more the truck shuts off

What causes the advance piston to stick on a Dodge 24?

The problem will most likely be an internal VP44 fault caused by low or no fuel supply pump pressure. This causes the advance piston to stick in the advance housing bore due to cavitation damage. Another cause could be from faulty lead free soldered connections that fail over time in the pump PSG.

Author Image
Ruth Doyle