How to install switched accessory power to your?
How to install switched accessory power to your?
The line to the relay is now in place and ready to meet the soldering iron. With the relay loosely placed in position, cut the switched power lead (86) to a length just a bit longer than what is required to reach the splice. Strip two-thirds of an inch from the wire end.
What’s the best way to control auxiliary power?
We also recommend a manual battery kill switch in between that connection. One of the most common ways to control power and properly protect circuits is with an auxiliary fuse block and max-amp circuit breaker.
What are the auxiliary switches on a ram truck?
Please try again later. Ram Trucks engineer Chris Borczon discusses auxiliary switches in Ram pickup trucks and chassis cabs, focusing specifically on how auxiliary switches work, how to program and how to connect them.
What kind of fuses do I need for auxiliary power?
There’s a variety of manufacturers who make auxiliary fuse panels that will support anywhere from 6-12 fuse positions, or 6-12 auxiliary power connections—up to 125amps in total. We recommend the fuse blocks and circuit breakers from Blue Sea Systems as they’re durable and easy to set up.
Where are the aux switches on a 3500 longhorn?
I just picked up my 3500 Longhorn with aux switches. Switches are integrated into the overall electronics. Configuration is done through the commercial menu on th dash. (Normal on, normal off, momentary, etc). On the drivers side firewall towards the top are two Deutsch connectors that are used with the wiring harnesses that are included.
The line to the relay is now in place and ready to meet the soldering iron. With the relay loosely placed in position, cut the switched power lead (86) to a length just a bit longer than what is required to reach the splice. Strip two-thirds of an inch from the wire end.
Do you need to install an aux switch?
Click to expand… Control what though the screen? If you hook anything up and want to control it via a switch, you will have to install your own switch… or you can likely buy the panel/harness and install it… hopefully it doesn’t need the dealer to flash to make it work. I just picked up my 3500 Longhorn with aux switches.
Where do you find aux switches on a ram truck?
You only get the AUX Switches if you select the Upfitter Electric Module Option ( code: XXS ) when you build your truck. If you dont, then you will get the normal switches. Unfortunately, I just don’t see the Aux option even when choosing the Upfitter option.
How to wire fish finder to accessory switch?
The cap or male of the plug has these little rubber grommets that are removable and it looks to me that you would feed the power and ground wire from the fish finder into the back of the connector and then plug it back in? I have to add a length of wire approx 15′ in between the fish finder and the connector.
How to wire up a 12V accessory plug?
Another of the new ‘Basic Skills’ family of short videos, this one covers how to wire up a 12v accessory plug. These are becoming more & more popular given the increasing number of accessories we are ‘plugging into’ our cars these days. Items like fridges, heated cups, fans, heaters, laptops & CB radios to list but a few.
How can I protect my switch accessory power?
The cardboard protects the rest of the wiring harness from inadvertent damage from the soldering iron. Begin by separating the desired wire from the harness itself. Place a piece of cardboard between the wire and the harness before gently shaving away about two-thirds of an inch of insulation. A sharp knife and a slow pace are all you need.
