How do you remove axles from a Dodge Durango?

Raise a floor jack under the differential to support the axle assembly. Remove the assembly’s bolts and fasteners at the left engine mount, pinion nose bracket and right engine mount and then lower the jack to remove the axles. “Dodge Durango & Dakota: 2004-2006 (Chilton’s Total Car Care Repair Manual)”; John Wegmann; 2008

How to remove the front axles from a Dakota?

You may need to disconnect other components depending on the exact year of the Dakota. If you need to remove the front axles from your Dakota, you will need plenty of garage or workshop space. Raise the truck’s front end and support it on jack stands, making sure the jack stands support the truck on the frame rails. Remove both front wheels.

How do you remove a crossmember from an axle?

Detach the crossmember by removing its mounting bolts, disconnect the driveshaft from the differential pinion flange and support it with a rope or wire, then disconnect the vent tube from the differential cover. Raise a floor jack under the differential to support the axle assembly.

Are there any problems with the Dodge Durango?

Each part is handpicked by our team of industry veterans to guarantee their quality and performance. While it’s generally a tough and reliable SUV, the Durango can develop problems depending on its particular model year. Dodge Durango engine problems are the most common cause of complaint for this vehicle.

How does the PCM work on a Dodge Durango?

The components in the engine, transmission, drivetrain and other areas send information to the PCM. If the PCM detects an issue with a component, it triggers the malfunction indicator light to illuminate on the dashboard of the Durango.

Where is the powertrain control module located on a Dodge Durango?

The powertrain control module (PCM) in your Dodge Durango is located on the right (passenger side) of the engine compartment.

What’s the engine for a 2002 Durango 4.7?

Does anyone know what engine is interchangeable with a 4.7 V8 in a 2002 Durango? Click to expand… Mechanic is misinformed. I have 342,000 on my 2001 4.7L, never opened up. I use good synthetic oil and mopar filters. I also change out the coolant at the recommended 100K/5yr interval and have made sure it has not overheated. That is key I believe.

What kind of ring does a Durango 4.7 have?

You are going to need to know if yours is an early 02 or a late 02 as they had 2 different 4.7’s and one wont run in place of the other. You need to find out if your 4.7 has a 16 tooth tone ring or a 32 tooth tone ring.

What kind of trans does a Durango 4.7 have?

The 4.7 with the 545RFE is a really good combo, both engine and trans have good reliability records. 4.7L, Fastman TB, Airaid CAI, Superchips 91 tune, Borla cat back exhaust, 180 T-stat, 1″ drop, Bilstein shocks, Hellwig rear sway, Mag-Hytec trans & rear diff covers, Energy Suspension Polyurethane Bushings.

Can you get a new engine in a Durango?

Going to the hemi requires upgrading all of the little items for smog such as vapor canister and sensors. It can be done, but is prohibitively expensive. You can get the proper engine in either rebuilt condition or much cheaper out of a wrecked Durango, both come with a guarantee but the new engine carries the best.

How do you remove axles from a Dodge Durango?