What kind of heater does a Dodge Journey have?
What kind of heater does a Dodge Journey have?
I have a 2010 Dodge Journey. When the heater is on, I get hot air on the driver side but cold air on the passenger side. Dodge Repair Questions? Ask a Mechanic for Answers ASAP By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. I have a 2010 Dodge Journey.
Why does my Dodge Journey have poor heat?
Ok since you have heat on the drivers side it’s probably not the blend door motor. We have seen some issues with the heater cores getting partially blocked causing poor heat on one side or the other. You can try flushing the heater core and see if that helps. Also the door motors will go through a relearn if you disconnect the battery.
Is the a / C on my Dodge Journey Working?
CarComplaints.com Notes: I hope I can stop you from buying this vehicle before you find out that it won’t be able to stop you. No one has added a helpful site for this 2010 Journey problem yet. Be the first!
What should I do if my journey heater is not working?
No one has added a helpful site for this 2010 Journey problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code:
I have a 2010 Dodge Journey. When the heater is on, I get hot air on the driver side but cold air on the passenger side. Dodge Repair Questions? Ask a Mechanic for Answers ASAP By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. I have a 2010 Dodge Journey.
Ok since you have heat on the drivers side it’s probably not the blend door motor. We have seen some issues with the heater cores getting partially blocked causing poor heat on one side or the other. You can try flushing the heater core and see if that helps. Also the door motors will go through a relearn if you disconnect the battery.
CarComplaints.com Notes: I hope I can stop you from buying this vehicle before you find out that it won’t be able to stop you. No one has added a helpful site for this 2010 Journey problem yet. Be the first!
No one has added a helpful site for this 2010 Journey problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code:
When did the Dodge Journey get a facelift?
In this article, we consider the first-generation Dodge Journey before a facelift, which was produced from 2009 to 2010. Here you will find fuse box diagrams of Dodge Journey 2009 and 2010, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout).
How big is the battery on a Dodge Journey?
You do not need to remove the bumper to change the battery on a Dodge Journey. Dodge Journey vehicles typically use a Group Size 26 battery with minimum cold-cranking amps of 525.
Why is the heat blend door on my Dodge Journey stuck?
Heat blend door may be stuck not switching to hot air . 2010 Dodge Journey R/T-Heat blows out on driver side and cold air on Passenge side. Why? and How do I fix?
How much does a journey heater core cost?
Heater cores are relatively inexpensive $75-$100). It’s the labor that drives up the cost unless you DIY. Probably looking at $600 or more at a shop. A few years back I had the entire HVAC interior assembly replaced in my ’06 Ram 1500 (HVAC doors failed) including a new heater core and AC evaporator (cheaper than a new or used truck).
What’s the best way to reverse a journey heater?
A trick you may want to try – reverse the heater hoses connected to the heater core to back flush the core. Be careful removing the hoses as the heater core lines are some what delicate and you don’t want to cause a leak. Back flushing may loosen any crud or scaling that has built up.
Heat blend door may be stuck not switching to hot air . 2010 Dodge Journey R/T-Heat blows out on driver side and cold air on Passenge side. Why? and How do I fix?
Are there two blend doors on a Dodge Journey?
Vehicles with dual zone heating systems have two blend doors – one for each zone. These are different than the mode doors, which direct the airflow to floor, dash, defrost, etc. Apparently the blend door for the driver’s side is working, but not the one for the passenger’s side. Help with heating issues, blend actuator – Interior – Dodge
Heater cores are relatively inexpensive $75-$100). It’s the labor that drives up the cost unless you DIY. Probably looking at $600 or more at a shop. A few years back I had the entire HVAC interior assembly replaced in my ’06 Ram 1500 (HVAC doors failed) including a new heater core and AC evaporator (cheaper than a new or used truck).
