Why is the heat on my Dodge Ram not working?
Why is the heat on my Dodge Ram not working?
I have a dodge ram 1500 2011 4×4, my heat is not working, it only blows cold air, no matter where the temp nob is on hot I have a dodge ram 1500 2011 4×4, my heat is not working, it only blows cold air, no matter where the temp nob is on hot – Answered by a verified Dodge Mechanic
What’s the problem with my Dodge Ram 1500?
I have a 2012 Ram 1500, the engine is warm, but the heater blows cold air. I’ve had the problem before, a Dodge mechanic Ram 1500: I have a 2012 Ram 1500, the engine is warm, but the…
Can a 2012 Ram 1500 run in cold weather?
In cold weather, it takes I have a 2012 Ram 1500, 5.7L. In cold weather, it takes forever for the heater to make warm air. Even when the engine is warm, the heater blows cold … read more Vocational, Technical or Tra… Either I need the thermostat changed or heater core and radiatior flushed . It blows cool air on heat … read more
How does the HVAC work on a Dodge Ram?
The HVAC box is basically spring loaded to default to defrost mode. The air setting dial on your dashboard redirects vacuum to a series of diaphragms around the HVAC box to change where airflow goes. The airflow direction mode is not controlled by electronics. It is not controlled by the blend door.
Why does my Dodge Ram fan only blow on high?
This feature is not available right now. Please try again later. If your Dodge’s heater or AC fan will only blow on high, or if it intermittently works on low but then stops, it is very likely your heater resistor. A cheap, easy to replace part, that anyone can fix. Loading…
Can a Dodge Ram blower motor work on the AC?
Dodge Ram blower motor won’t work on the heater and AC. There is no power going to the blower motor, fire reducer or to switch. Fuses are good, relays are good but it will not heat or cool the truck. How to fix this? Show More
Why is my Dodge Ram heater not working?
Dodge Ram blower motor won’t work on the heater and AC. There is no power going to the blower motor, fire reducer or to switch. Fuses are good, relays are good but it will not heat or cool the truck. How to fix this? Show More Show Less Ask Your Own Dodge Question Share this conversation Answered in 34 minutes by: 1/19/2008
Can a 93 Dodge W-250 blow on heat?
93 Dodge: 250 and the blower motor does not blow on heat or defrost I have a 93 Dodge W-250 and the blower motor does not blow on heat or defrost but does blow on A/C and vent. I changed the switch ( the one that has off.max AC, AC, vent, heat, defrost ) and I still h…
Where is the heater on a Dodge Ram 1500?
It’s very possible its actually the heating element under the passenger side dash. Look under the dash you will you will see a plug with the pigtail piece of the harness. Unplug the clip and remove the 2 screws and that will release the element . It looks like a pumice stone with the leads connected to it.
What should I do if my Ram heater stops working?
If the heater has stopped working in your Ram, this process has failed in one way or another. A word of caution: If there is no coolant in your overflow, you can refill it by adding more to the overflow reservoir. There is almost never a situation where you would need to take the radiator cap off of the radiator to add coolant.
What should I do if my Dodge Ram clutch is overheating?
This is the clutch operating normally. Another way to check the clutch fan: disconnect the bimetal spring and rotate 90 degrees counter clockwise. This disables the temperature-controlled, free-wheeling feature and the clutch performs like a conventional fan. If this cures the overheating condition, replace the clutch fan.
What’s the problem with my Dodge Ram heater?
Symptom 2 – Luke warm heat when set to 100% hot. Symptom 3 – The faster I turn the fan up the colder the air coming out gets.
What to do if your Dodge truck has no heat?
Sit in the truck with the key on, engine off and operate the temperature control knob from cold to hot and listen for the sounds of the blend door actuator moving in it’s normal sweeping pattern. If you do not hear the actuator moving then we need to verify that the actuator is receiving a signal from the HVAC control head.
Why is the thermostat on my Dodge Ram not working?
The job of your Ram’s thermostat is to regulate the temperature of the engine. It does this by allowing water to enter the engine when it is getting hot, and by keeping coolant from entering while the vehicle warms up. Sometimes when a thermostat goes bad, it stays stuck open. This allows the coolant to continuously enter the engine.
Is the blend door working on a Dodge Ram 1500?
This is a 2002 Ram 1500 4.7, correct? The first thing I would verify is that both heater hoses are hot while the engine is at normal operating temp. If they are both hot then most likely you have good flow through the core. Next step would be to verify that your blend door is functioning.
