Where is the fuse box on a Dodge Stratus?

A Power Distribution Center is located in the engine compartment; near the air cleaner. The fuse access panel is behind the end cover at the left side of the instrument panel. Power Door Lock Switch Illumination, Transmission Range Switch, Daytime Running Light Module (Canada), Power Windows, Anti-lock Brake System Module

Why is my OBD2 not connecting to my computer?

But after conducting research online and speaking to different mechanics and technicians, I found out that a wide range of problems can cause it. These issues include an incompatible obd2 scan tool, bad fuses, damage in the circuit board, ECU, and failed computer. Non connecting data Port Issue.

What kind of Bluetooth scanner does OBD2 use?

OBD2 Bluetooth Scanner Konnwei KW808 Bafx 34t5 Professional automotive diagnostic scanner Floor Jack Arcan Craftsman 3 Ton Craftsman Motorcycle Hein Werner Torin Jacks Harbor Freight Harbor Freight Powerzone Pro Lift Motorcycle Jack Scissor Jack Transmission Jack Stands Torin Jack Stands OBD2 Not Linking? How to fix it? By Kevin Nicholas

Dodge Stratus (2004) – fuse box diagram Year of production: 2004 Underhood Fuses (Power Distribution Center) A Power Distribution Center is located in the engine compartment; near the air cleaner. Dodge Stratus – fuse box – power distribution Interior Fuses The fuse access panel is behind the end cover at the left side of the instrument panel.

Where is the power distribution center on a Dodge Stratus?

A Power Distribution Center is located in the engine compartment; near the air cleaner. The fuse access panel is behind the end cover at the left side of the instrument panel.

Which is the ground wire for the fuel injector?

Minor correction, the wire to the ECU is the “ground” wire, it’s the one the ECU pulls low to fire the injector. The wire to the injector resistor pack is the power wire. Now, since it’s only the number 2 injector, it shouldn’t be the injector driver in the ecu.

Why is my fuel injector # 2 cylinder not getting fuel?

No Pulse I hooked a stethoscope to the injector #2 and it has no pulse. All the injectors are ticking perfectly fine. I switched injectors to stock and have 8 set of these injectors and no matter which injector I use, the #2 cylinder isnt getting fuel. The engine studders and has terrible rough idle at like 550rpm.

Where is the crankshaft sensor on a Mitsubishi Stratus?

The crankshaft position (CKP) sensor on your Mitsubishi Car (or Chrysler Sebring or Dodge Stratus) is located behind the timing belt but testing it is done without removing the timing belt or its components.

Is the ignition coil on plug a true ignition system?

OK, technically speaking, this type of ignition system is not a true Coil-On-Plug (C.O.P.) System but hey, if it kinda’ looks like a duck and kinda’ quacks like a duck who cares? You’re here to test them, not hold a debate about what category of ignition system they fit into.

A Power Distribution Center is located in the engine compartment; near the air cleaner. The fuse access panel is behind the end cover at the left side of the instrument panel.

What causes an AC control switch to stop working?

As the AC control switch is an electrical switch, it contains electrical contracts and knobs that can wear and break. A broken knob or completely worn out electrical contact inside of the switch may cause one or more of the settings not to work, or to work intermittently.

Where to find a blown fuse on a Dodge Ram?

Use fuse box diagrams and labels to locate a potentially blown fuse. You’ll find these diagrams either on the panel for the fuse box, in a service manual or online. Identify the fuse connected to your problem circuit and pull it from the fuse box. A blown fuse doesn’t always leave burn marks on or around the fuse.

Where are the fuse panels on a Dodge Ram?

Here you will find fuse box diagrams of Dodge Ram Pickup 1500/2500/3500 1994, 1995, 1996, 1997, 1998, 1999, 2000 and 2001, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Why does my Dodge engine stall when I start the car?

Other causes may be bad or worn out components in the ignition secondary system, causing the engine to accelerate poorly and even stall. These steps will help you inspect these components and solve the hesitation problem on your Dodge vehicle.

What causes engine hesitation on a Dodge Charger?

The engine hesitation on your Dodge may be created by problems in one or more components. In most cases, a bad throttle position sensor (TPS) fails to signal the engine computer about throttle operation.

Where is the ignition fuse on a Dodge?

Hi roelcorez, welcome to Just Answer!. Dodge hid one fuse that you probably missed. It’s called the ignition-off draw (IOD) fuse, located in the inside fuse box, the Junction Block. Look under the panel at the far left end of the dash… The fuse is held inside a black colored fuse holder with tabs to make it easier to pull out of the block.

Why does my dome lamp and radio not work?

On the odd chance that the dome lamp and radio have coincidental failures not related to Fuse 12, check some of those other circuits in the last diagram I sent. If glove box, power mirrors, lighted mirrors (in visors), underhood lamp and truck bed lamp work (or any combination of those), it shows the circuit to be powered as it leaves the JB.

Where is the fuse panel on a Dodge Dakota?

The fuse panel is located behind the cover on the driver’s side of the instrument panel.

Where is the fuse panel on a Honda Accord?

The fuse panel is located behind the cover on the driver’s side of the instrument panel. Sentry Key Immobilizer Module, Instrument Cluster, Dome Lamp, Glove Box Lamp and Switch, Driver Door Module, Data Link Connector, Overhead Console, Cargo Lamp, Radio (2000-2001), Center Console Lamp (2000-2001)

Is there a fuse box on a Dodge Ram 3rd generation?

This article applies to the Dodge Ram 3rd Generation (2002-2008). Not only are there occasional issues regarding the fuse box itself, but Dodge Ram owners sometimes cannot find the fuse box diagram to determine where to look for the faulty fuse or relay.

Where are the fuses in a Dodge Durango?

Cigar lighter (power outlet) fuses in the Dodge Durango are the fuses F16 and F17 (2004-2006) or F18 (2007-2009) in the Interior Fuse Box, and fuse №2 (if equipped) in the Power Distribution Center. It is located in the left kick panel behind the cover. The Power Distribution Center (PDC) is located on the left side of the engine compartment.

How do you replace a fuse in a relay?

Pull the fuse out of the box. Visually inspect the fuse. If the metal inside the fuse is separated, that fuse is blown. Replace it with a new fuse with the same amperage. Try to find a relay in the fuse box with the same amperage as the relay supplying power to the electrical component that is not functioning properly.

Where do you find the OBD II connector?

Where is the connector located? The connector must be located within three feet of the driver and must not require any tools to be revealed. Look under the dash and behind ashtrays. The Five Flavors of OBD II

How do you know if your car has OBD-II?

OBDII OBD-II On-Board Diagnostic System – How do you know if your vehicle has OBD-II – the connector and communication types are explained. OBDII – On-Board Diagnostic’s System – Does My Car Have OBD-II? The Connector and Communications. Does My Car Have OBD-II?

What are the warning lights on a Dodge?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Dodge. Click a link to learn more about each one.

Is the Check Engine light still lit on Dodge Ram?

This article applies to the Dodge Ram 2nd, 3rd, and 4th Generation (1994-Present). It’s not uncommon for a check engine light to remain lit long after the issue setting it off in the first place has been fixed.

What happens if the ASD relay goes out?

So, If any of the circuits that the (ASD) relay provides power for go out; as a result of a bad (ASD) relay; then it may affect other circuits, one of them being the starting circuit. A bad (ASD) relay can indirectly, and sometimes directly, cause a starting circuit to not have power; which will result in a no crank condition when you turn the key.

What does the Check Engine light on an ASD relay mean?

Another symptom of a possible problem with the (ASD) relay is an illuminated Check Engine Light. So, If the computer detects that a problem with the (ASD) relay or circuit has occurred; it will illuminate the Check Engine Light to alert the driver of a problem. The Check Engine Light can also be activated for a wide variety of other reasons.

When did the Dodge Stratus fuse box come out?

In this article, we consider the second-generation Dodge Stratus, produced from 2001 to 2006. Here you will find fuse box diagrams of Dodge Stratus 2004, 2005 and 2006, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Which is the best manual for a Dodge Stratus?

Our most popular manual is the Dodge Stratus Sedan Workshop Manual (V6-2.7L (2001)) . This (like all of our manuals) is available to download for free in PDF format. How to download a Dodge Stratus Repair Manual (for any year) These Stratus manuals have been provided by our users, so we can’t guarantee completeness.

How to fix your trunk if trunk latch / lock won?

This is just a temporarry solution if you trunk won’t latch. You’ll be able to close it and drive like that until you’ll be ready to fix it. This is just a temporarry solution if you trunk won’t latch. You’ll be able to close it and drive like that until you’ll be ready to fix it. Skip navigation Sign in Search Loading… Close

What to do if your car trunk won’t open?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Die but DIY 🙂 I’m trying to help people solve their problems for free.

When did Dodge stop making the Dodge Stratus?

However, production ended at the Sterling Heights Assembly Plant in early 2006 which had built 1,308,123 Stratus and Sebrings since 2000. The Dodge Avenger replaced the Stratus nameplate in early 2007 for the 2008 model year.

Is the Dodge Stratus the same as the Cirrus?

For Brazil, the Stratus was marketed as the Chrysler Stratus, the equivalent Chrysler Cirrus being unavailable. It had the same engines as the North American version but a higher ground clearance for the road conditions there.

In 2002, the models that were released no longer have the Dodge logo on their doors. The 2004 edition of the Stratus was redesigned with the goal of increasing customer ratings and sales. The production of the Dodge Stratus in the Sterling Heights Plant of the Dodge Company in Michigan officially ended in 2006.

What should the air temp be in a Dodge Stratus?

The ideal range for the air flowing from your vehicle’s vents when the A/C system is functioning properly is approximately 40 to 45 degrees Fahrenheit. Recharging the A/C system and sealing any leaks by adding refrigerant and sealer may resolve the issue.

What kind of engine does a Dodge Stratus have?

The second model, known as the ES, originally had a standard 2-liter engine with an option for a DOHC 2.4-liter engine and a 2.5-liter V6 engine. When 1998 came, the 2.4-liter became the standard engine while the 2.5-liter V6 was offered as an option for the ES models.

Where is the fuel pump shut off switch located?

On Ford, Peugeot, VW, Citroen, Vauxhall, Subaru, Renault, Toyota and Mazda, inertia switch location is usually on one of the following two hidden places: Behind or below glove compartment, sometimes hidden under the carpet; On the driver side, between the footrest area and door, sometimes hidden under the carpet.

What causes a Ford fuel pump to shut off?

If your Ford ever fails to start or stalls on you suddenly, the first thing to check is the inertia fuel shut-off switch. The switch is designed to trip and cut power to the fuel pump in the event of a collision, but you can also trigger it by hitting a large bump or pothole as well.

What does the O2 sensor on my car do?

If you like to tinker with your car, or add performance parts to increase horsepower, such as a larger throttle body, nitrous or even headers, the O2 sensor will likely tell the ECU the engine is producing too much pollution and the “Check Engine” light will illuminate.

Where is the fuse for the ECU located?

Locate the fuse for the ECU using the fuse diagram on the underside of the fuse panel cover. Pull the fuse for the ECU using the fuse pullers in the fuse panel. Turn the ignition to the “On” position but don’t crank the engine (it won’t start anyway).

How to know if your O2 sensor is faulty?

Replacing the O2 sensor without checking to see if the vehicle is running rich due to another problem. Check the wiring at O2 sensor for damage; if damaged, repair or replace affected harness. Check voltage at the O2 sensor; if the voltage is steadily high (.9V or higher) the O2 sensor may be faulty. Before replacing, check the following:

How many fuses are in a Toyota Tacoma?

Fuses (type A) Fuse Fuse Ampere rating [A] Circuit 1 HEAD (RH) 10 Right–hand headlight 2 HEAD (LH) 10 Left–hand headlight 3 DRL 7,5 Daytime running light system 4 HEAD (HI RH) 10 Right–hand headlight (high beam), high b

What does O2 sensor code 08-s-05 mean?

The Ford recall number is 08-S-05. Another thing I would like people to understand is the O2 sensor code does not mean it’s time to replace the sensor. It means that it’s time for some diagnosis and repair. If the diagnosis leads to a replacement of an oxygen sensor that is just fine.

Where is the fuse box on a Dodge Stratus?