Is contact cleaner safe for electronics?
Is contact cleaner safe for electronics?
Most contact cleaners are safe to use on printed circuit boards (PCBs) in electronic devices. Make sure the contact cleaner solvent is compatible with all components, connectors, and packaging by testing on a scrap part or inconspicuous area.
Where is the master switch on a Dodge Ram?
If I unlock the windows from the master switch I lose power to all of the windows, there is actually still power but not enough to do anything. I have unplugged the harness for all windows but the drivers side and I still get the dimming dome light when trying to roll up the the passenger rear. So it isn’t in the passenger side rear door.
Is the power door lock on my Ram 1500 working?
All other windows (Quadcab) are OK. Power door locks not working as well. Doors can be locked using fob. I’ve got the power window unit out of the door. Looks like it’s one piece. So far I’ve: checked fuse, disconnected battery to see if there was re-set, made sure the window lock was off.
Why are my windows not working in my Dodge Ram?
Replaced the wire, and the right rear rolls up and down. It wasn’t shorted in the door wire harness it was somewhere in the cab. Still can’t use any windows in the truck if I unlock the windows. If I unlock the windows I lose power to operate any of them from any switch. Every now and then it will pop a fuse if I unlock the master switch.
Why does my driver side door lock not work?
The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.
All other windows (Quadcab) are OK. Power door locks not working as well. Doors can be locked using fob. I’ve got the power window unit out of the door. Looks like it’s one piece. So far I’ve: checked fuse, disconnected battery to see if there was re-set, made sure the window lock was off.
The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.
Why does my drivers side window not work?
A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?
Why is the door lock on my Dodge Grand Caravan not working?
The passenger side rear door lock actuator failed causing the door locks to get stuck in the lock position. The door lock will not move to the unlock position and the door will not open. This happens on the street while driving and passengers had to exit the vehicle from another door.
