Why is the radio on but no sound?
Why is the radio on but no sound?
But the fact that the rear speaker would come on at all suggests that the radio is not going into protection mode, but that there connections to the speaker are bad. Although it is possible for the wiring to the speakers to fail, it is not likely, especially to more than one door.
What to do when your car radio has no sound?
Usually when this happens though the radio will lose all power and you won’t have sound at all. Verify your fuses behind the radio, and in the vehicles fuse panels as well. Replace any blown fuses and see if the radio kicks on and produces sound. If you have power to the radio officially but yet you still have no sound, then continue on.
Why is the radio not working in my Subaru?
I was listening to a cd at the time, so I tried the radio tuner, but that produced no sound through the speakers either. The radio still had power, and it still tuned in stations according to the display. I pulled the door pannels off to check the speaker connections.
Why does my Toyota Corolla radio have no sound?
Please try again later. An easy fix for a 2010 Toyota Corolla radio with no sound. I found a speaker wire in the trunk broke loose from its retainer and shorted on the speaker frame. There are no protective covers around the speakers, and large items in the trunk may hit them. Loading…
Is the radio still working but no sound from the speakers?
Vocational, Technical or Tra… 2002 dakota with RAZ cd/tape radio no longer has sound from front speakers. Now, 1 of the rear speakers is going in and out. … read more
Why does my car stereo have no sound?
This can be due to your car stereo overheating or shorting out. This means that your radio has burned up and will no longer function. Because it no longer is obtaining any power, it cannot produce signals to the speakers so you have sound. If you’re still wondering why and how to fix a car stereo that has no sound, we’re moving onto the final step!
Is the radio still working on my 2002 Dakota?
2002 dakota with RAZ cd/tape radio no longer has sound from front speakers. Now, 1 of the rear speakers is going in and out. … read more Automotive Diagnostic Spe… 2013 Charger Pursuit. Base 6 speaker stereo. No external 2013 Charger Pursuit.
Why does my Jeep Wrangler have no sound?
Still no sound. No sound from the CD player, either. I checked fuse #3 (sub woofer system) & fuse #14 (radio). Both looked good. Are there any radio fuses under the hood? Yesterday, my speakers worked fine. No problem. This morning, my radio lit up, but no sound. At first, I thought that the radio station had a problem. So, I switched stations.
When do I hit a bump in the road, the radio?
Re: When I hit a bump in the road w/ my car, the radio… Thanks for choosing FixYa and welcome to the site. More then likely, you have a loose wire in the back somewhere. You will need to take the radio out and inspect the wires in the back. Look for loose wires/connections or possibly a cut wire.
What kind of noise is coming from my speakers?
Noise can be static, whine, hiss, distortion, or other sound issues. Make sure to check ground wires . Check the ground wires to all of the components in your system. This may include the receiver (head unit), external amplifier, equalizers, or other components.
What to do when a receiver won’t make sound?
Many receivers have a Speaker A and Speaker B switch to toggle connected/extra speakers. Make sure that the right one (s) are enabled and check that the correct source has been selected, too. It’s easily overlooked, but all it takes is an accidental bump or press of a finger on a remote to mix things up. Check the speaker wires.
Re: When I hit a bump in the road w/ my car, the radio… Thanks for choosing FixYa and welcome to the site. More then likely, you have a loose wire in the back somewhere. You will need to take the radio out and inspect the wires in the back. Look for loose wires/connections or possibly a cut wire.
Noise can be static, whine, hiss, distortion, or other sound issues. Make sure to check ground wires . Check the ground wires to all of the components in your system. This may include the receiver (head unit), external amplifier, equalizers, or other components.
Why does the radio work but no sound?
The radio seems to work, I can pick stations etc, turn volume up and down, but there is never any sound that comes out of the speakers Any ideas what could be wrong? maybe an amplifier fuse somewhere? I looked at the mirror/audio and woofer fuses under the dash, they are both good Is this the BOSE version or Standard?
Why is there noise in my car stereo?
There is noise, cracking sound, static or no audio through the speakers of the car stereo system. Noise in your car audio system can be caused by more than one issue. Noise can be static, whine, hiss, distortion, or other sound issues. Make sure to check ground wires . Check the ground wires to all of the components in your system.
Is the 99 OB radio on or off?
About a week ago my neighbor reported to me that his 99 OB radio would come on (display) but there was no sound out the speakers. He could tune to different stations, it would load and play CDs, the volume setting could be varied, but no sound. I agreed to have a look at the radio when he had it out.
Why does my stereo sound out of phase?
It sounds like the speakers are out of phase. Reverse the plus and minus inputs on one speaker and see if that works. If your PC or surround system is set for a center speaker and you don’t have one that removes vocals since they often come out of the center only.
Why are my stereo speakers not playing music?
Stereo speakers no vocals when playing music. It’s these speakers. It’s speakers fault 100% not software.
But the fact that the rear speaker would come on at all suggests that the radio is not going into protection mode, but that there connections to the speaker are bad. Although it is possible for the wiring to the speakers to fail, it is not likely, especially to more than one door.
Many receivers have a Speaker A and Speaker B switch to toggle connected/extra speakers. Make sure that the right one (s) are enabled and check that the correct source has been selected, too. It’s easily overlooked, but all it takes is an accidental bump or press of a finger on a remote to mix things up. Check the speaker wires.
Why does my stereo player not make sound?
The process can seem a little intimidating, but not if you proceed carefully and methodically to rule out each possibility. Quite often it can be the simplest, silliest reason (you might get a chuckle out of it later on) as to why the system stopped working or wasn’t working from the get-go.
I was listening to a cd at the time, so I tried the radio tuner, but that produced no sound through the speakers either. The radio still had power, and it still tuned in stations according to the display. I pulled the door pannels off to check the speaker connections.