Why do my power locks not work?
Why do my power locks not work?
If the locks begin to work intermittently, you may have a broken wire. Extremely cold weather has caused the mechanism to freeze. Because the doors on your car are not fully moisture-proof, extreme cold may cause the linkage controlling your power locks to freeze. The solenoid needs to be replaced.
Is the power door lock on my Ram 1500 working?
All other windows (Quadcab) are OK. Power door locks not working as well. Doors can be locked using fob. I’ve got the power window unit out of the door. Looks like it’s one piece. So far I’ve: checked fuse, disconnected battery to see if there was re-set, made sure the window lock was off.
Why are my sliding door locks not working?
the reason the locks dont work more then likely there is a code stored in the bcm for a lock output circuit normally caused by one if not both of the sliding door acuators. even if you change the acuators the locks still will not work until the code is cleared. You can’t post conmments that contain an email address. sounds like your BCM is bad!!
What’s the problem with my 2011 Ram 1500?
My 2011 Ram 1500 seems to have some computer issues and I would love it if someone could provide solutions. 1. Service 4wd light came on shortly after an oil change. 4wd was serviced by a Mr. Tire, but light comes and goes and 4wd will not engage when light is on. Research says I need to have the computer flashed.
All other windows (Quadcab) are OK. Power door locks not working as well. Doors can be locked using fob. I’ve got the power window unit out of the door. Looks like it’s one piece. So far I’ve: checked fuse, disconnected battery to see if there was re-set, made sure the window lock was off.
Why is my Dodge ram1500 no power in cab?
It’s very likely a problem with the power control module or the integrated power module. Using a scan tool check to see if there are any trouble codes being stored in the memory of the PCM. Then if there is no trouble codes try doing a complete system reset in case we have a software glitch.
the reason the locks dont work more then likely there is a code stored in the bcm for a lock output circuit normally caused by one if not both of the sliding door acuators. even if you change the acuators the locks still will not work until the code is cleared. You can’t post conmments that contain an email address. sounds like your BCM is bad!!
What to do if your Dodge Ram does not start?
Sensor always check the connection and for power before replacing it if you do not have the scan tool.
